| Model | LP-200-2500 |
| Frequency (manufacturer model field) | 200-2500MHz |
| Bandwidth (manufacturer model field) | 200-2500MHz |
| Gain (manufacturer model field) | 9 dBi. |
| Frequency Range | 200-2500 MHz |
| Gain | 9 dBi. |
| Bandwidth | 200-2500MHz |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 65+/-5 Degrees |
| Front to Back Ratio | 17+/-1 dB. |
| VSWR - Equal To or Better Then | 1:2.5 |
| RF Power Handling Capacity | 250 Watts |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 200 Km/Hr. |
| Overall Length | 900 mm |
| Shipping Length | 1000 mm |
| Support Boom -Material - O.D. | AluminumSquare Tube |
| Elements - Materials- Cross Section - Outer Diameter | AluminumRound Rod |
| Mounting Clamps Position | At the back end of boom |
| Maximum Mount Pipe Diameter | 52mm (2 Inches) |
| Gross Weight | 4.5 Kgs. |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Published detail | The LP-200-2500 is engineered for operators who require "total spectrum visibility" across the critical UHF and microwave bands (0.2 GHz to 2.5 GHz). |
| Precision 9 dBi Gain | By utilizing a full-sized, non-loaded array design, the antenna achieves exceptional gain and a focused 55-degree horizontal beamwidth. This allows for extreme precision in signal targeting and significantly increased range compared to standard broadband antennas. |
| High-Power Strategic Variant | While the standard unit handles 180 Watts at the high end, an optional 650W version is available for high-intensity Electronic Countermeasures (ECM) and strategic jamming operations. |
| Rapid Tactical Logistics | With an overall length of 1.2 meters and a weight of only 3.5 Kgs, this antenna is highly portable. It features removable elements and can be fully assembled by a single technician in less than 5 minutes, making it ideal for "jump" missions. |
| MIL-STD-810G Certified | Rigorously tested for extreme temperature (-40 to +70°C), shock, vibration, rain, and salt fog. It is specifically engineered to thrive in coastal, monsoon, or desert environments. |
| Marine-Grade Hardening | All fasteners are made of high-quality marine-grade stainless steel. The entire array is protected by an electrostatic Epoxy Powder Coating of military green color for total corrosion resistance. |
| Integrated Safety | Operates at D.C. ground, providing a low-resistance discharge path for lightning and suppressing atmospheric static to ensure an ultra-quiet noise floor for high-sensitivity surveillance. |
| Comprehensive 200–2500 MHz Coverage | One antenna for UHF ATC, GSM, LTE, and S-Band. |
| High-Efficiency 9 dBi Gain | Focused directional precision for long-range intercepts. |
| Rapid 5-Minute Assembly | Removable, segmented elements for streamlined logistics. |
| Compact Footprint | 1.2m length ensures a low visual signature and reduced wind load. |
| Polarization Agility | Permits quick changes between Vertical and Horizontal orientation. |
| Direct Ground Protection | Integrated lightning protection and enhanced noise immunity. |
| Published detail | Across the 200-2500 MHz range, the RF environment is often "congested." A standard wideband antenna "sees" everything, which can overwhelm a receiver. |
| The Precision Advantage | The focused 55-degree beamwidth of the LP-200-2500 acts as a directional "spotlight." This allows an operator to isolate a specific cell tower or tactical data link while physically "nulling out" interference from the sides and rear. |
| Published detail | In the 200–2500 MHz band, the RF environment is often "congested." A standard wideband antenna sees everything, which can overwhelm a receiver with background noise. |
| The Precision Advantage | The 9 dBi gain and focused 55-degree horizontal beamwidth of the LP-200-2500 act as an RF "spotlight." This allows an operator to isolate a specific cell tower or a single tactical repeater while physically "nulling out" interference coming from the sides or rear. |
| Range Extension | Every 6 dB of gain effectively doubles your reception range. The 9 dBi gain allows you to pull in weak tactical signals from distances where standard dipole antennas would only see static. |
| The "Null" Problem | Most tactical handhelds and vehicle whips are vertically polarized. If a signal reflects off a slanted roof, it may arrive at your site with a significant horizontal shift. A standard vertical antenna would experience a signal dropout of up to 20 dB. |
| The Tactical Solution | The LP-200-2500 features a flexible mounting arrangement that allows operators to switch between Horizontal and Vertical polarization in seconds. This ensures you can match the orientation of the incoming reflected wave to maintain a stable, high-fidelity intercept. |
| Published detail | To successfully disrupt a target link (e.g., a high-speed LTE data link or a 400 MHz trunked system), you must achieve a superior Jamming-to-Signal (J/S) ratio at the victim’s receiver. |
| Power Density Focus | Instead of scattering 650W in all directions, the LP-200-2500 focuses that energy into a concentrated 55-degree cone. |
| ERP Advantage | This concentration exponentially increases your Effective Radiated Power (ERP). You can successfully "drown out" a legitimate signal from several kilometers away, even when the adversary is using high-power mobile transmitters. |
| The Solution | The LP-200-2500 is D.C. Grounded. It constantly bleeds off this static charge to the mast and earth. This ensures the lowest possible noise floor, allowing you to detect low-power "hidden" transmissions or frequency-hopping signals that would be buried in the static of an ungrounded system. |
| Cable Integrity | At 2500 MHz (2.5 GHz), cable loss is severe. Avoid standard RG-58. Use LMR-400 or LMR-600. Every 3 dB of cable loss effectively cuts your jamming power or reception sensitivity in half. |
| Rapid 5-Minute Setup | Take full advantage of the removable elements. In modern EW, speed is survival. The LP-200-2500's speed of assembly (under 5 minutes) is a key survivability feature for "jump" missions. |
| Mast Stability | At 3.5 Kgs and 1.2 meters long, this antenna has a low wind profile but still requires a stable mast (up to 2 inches). A swaying mast will cause the 55-degree beam to "shimmer," making it harder to maintain a lock on a distant target. |
| Boresight Alignment | Because the beamwidth is 55 degrees, a 25-degree error in alignment will drop your gain significantly. Use a compass to ensure the antenna is pointed exactly at the target sector for maximum intercept probability. |
| Frequency stated in title | 200-2500 MHz |
| Gain stated in title | 9 dBi |
| Category | Horn, Dish, Grid & Log Periodic |