| Model | LP-135-470 |
| Frequency (manufacturer model field) | 135-470MHz |
| Bandwidth (manufacturer model field) | 135-470MHz |
| Gain (manufacturer model field) | 9 dBi. |
| Frequency Range | 135 -470 MHz. |
| Gain - Typical | 11 dBi. |
| Bandwidth | Entire Band |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beam-width –Half Power Points | 50 +/-5 Degrees Typical |
| Vertical Beam-width –Half Power Points | 45 +/-5 Degrees Typical |
| Front to Back Ratio | 18 +/-1 dB. Typical |
| VSWR – Equal to or Better Than | 2.5:1 |
| RF Power Handling Capacity | 300 Watts (1.5 KW Optional) |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware | Marine Grade Stainless Steel |
| Gross Weight | 5 Kgs. |
| Wind Rating | 200 Km/Hr. |
| Overall Length | 1.15 Meters |
| Shipping Length | 1.15 Meters |
| Support Boom -Cross Section –Outer diameter | Aluminum-Square Tube-25.4mm |
| Elements -Cross Section –Outer diameter | Aluminum-Round Tube- 12.7mm |
| Insulator Material | Teflon & Nylon |
| Maximum Mount Pipe Diameter | 52 mm (2 Inches) |
| Final Color / Finish | Military Green or Customized |
| Wideband Spectrum Dominance | Engineered for continuous, high-performance operation from 135 MHz to 470 MHz, providing a "single-antenna" solution for the entire VHF and UHF tactical bands without the need for field tuning or element adjustment. |
| Pure Dipole Performance | Utilizes a full-size dipole array without lossy loading coils or matching stubs, ensuring a flat, consistent 11 dBi gain response across the entire operating bandwidth. |
| High-Intensity Power Handling | Standard architectural design supports a continuous 300 Watts RF power handling capacity, with a factory-available upgrade option for 1.5 KW to support high-power broadcast or strategic jamming. |
| Rapid Tactical Deployment | Features a modular design with a specialized mounting arrangement that enables a complete field assembly in less than 5 minutes, critical for "move-and-strike" tactical operations. |
| Optimized Aperture Precision | Delivers a highly directional beam with a 50-degree horizontal and 45-degree vertical beamwidth, facilitating accurate emitter triangulation and long-range link stability. |
| Lightning & Static Mitigation | Operates at D.C. ground with a low-resistance discharge path, shielding sensitive receivers from static noise and lightning-induced surges. |
| Superior Signal Isolation | Achieves an 18 dB typical Front-to-Back ratio, effectively suppressing rearward interference and background noise to ensure maximum signal-to-noise (SNR) ratios. |
| Architectural-Grade Construction | Built using 6063T6 anodized aluminum alloy with square tube booms (25.4mm) and round tube elements (12.7mm) for a superior strength-to-weight ratio. |
| Marine-Grade Hardware Suite | All assembly components, including nuts, bolts, and mounting brackets, are fabricated from High-Grade Stainless Steel to prevent galvanic corrosion in saline environments. |
| Corrosion-Proof Coating | Finished with an Epoxy-based powder coating (Military Green), providing an additional barrier against chemical, UV, and salt-spray degradation in coastal or tropical theaters. |
| Logistics-Friendly Profile | All elements are segmental and removable; the longest element is only 0.57 meters, allowing for a compact shipping length of 1.15 meters for easy transport via tactical vehicles or aircraft. |
| Thermal Extremes | Certified for continuous operation in temperatures ranging from -40°C to +80°C (MIL-STD-810G, Method 470.5/502.5). |
| Wind Loading Performance | Aerodynamically optimized to maintain structural integrity and bore-sight accuracy in constant winds up to 200 Km/Hr. |
| Humidity & Rain Resistance | Fully sealed against 0 to 95% Relative Humidity and high-velocity horizontal rain (Method 507.5/506.5). |
| Mechanical Resilience | Tested for High-Impact Shock (Procedure IV) and Tactical Vibration (Procedure I), ensuring survivability during rough transit in off-road military vehicles. |
| Saline & Chemical Defense | Salt Fog testing (Method 509.5) ensures the anodized aluminum and epoxy coating remain intact during long-term coastal deployments. |
| Biological Resistance | Materials treated to resist Fungus Growth (Method 508.6), preventing structural degradation in dense jungle or humid tropical environments. |
| Flat Gain Response Across Wideband | Unlike traditional Yagi antennas that only peak at a specific frequency, the LP-135-470 provides a consistent 11 dBi gain across the entire 135–470 MHz spectrum. This ensures uniform performance for both VHF and UHF communications without the need for multiple antenna systems. |
| Rapid Tactical Mobilization | The specialized design allows for a complete field assembly in less than 5 minutes. With two-segment removable elements and a compact 1.15-meter shipping length, it is the ideal aperture for "Quick-Reaction" tactical teams and mobile command units. |
| Architectural-Grade Durability | Constructed from 6063T6 ultra-corrosion-resistant aluminum alloy and reinforced with extra spacers between support booms, this antenna is built to withstand extreme mechanical stress and high wind loads up to 200 Km/Hr. |
| Total Environmental Protection | The dual-layer protection of architectural anodization followed by an epoxy-based powder coating ensures the antenna remains immune to salt-spray corrosion in coastal areas and chemical degradation in industrial theaters. |
| High Power Projection | Capable of handling 300 Watts standard (and up to 1.5 KW optional), the LP-135-470 allows for high-intensity signal transmission, providing the "punch" required for long-range data links and high-power jamming. |
| Direct Ground Lightning Safety | The antenna operates at D.C. ground, providing a low-resistance discharge path. This not only protects sensitive radio hardware from lightning strikes but also significantly reduces static noise for clearer reception. |
| Logistics Simplification | A single LP-135-470 replaces the need for carrying multiple narrowband antennas, significantly reducing the weight and volume of a tactical gear load-out. |
| Zero Loading Loss | Because the antenna uses a pure log-periodic dipole array rather than size-reduction loading coils, there is no internal signal loss, resulting in maximum radiation efficiency. |
| High Signal-to-Noise Ratio (SNR) | The 18 dB Front-to-Back ratio ensures that the antenna focuses exclusively on the target, effectively "nulling" out interference from the rear and sides. |
| All-Weather Reliability | Certified to MIL-STD-810G, the antenna performs flawlessly in temperatures ranging from -40°C to +80°C, ensuring mission success in arctic, desert, or tropical environments. |
| Tactical Communications | High-reliability wideband links for VHF/UHF ground-to-ground and ground-to-air tactical voice and data networks. |
| Electronic Warfare (EW) & Jamming | Optimized as a directional high-power source for jamming tactical radio communications, RCIED triggers, and data links in the 135-470 MHz window. |
| Signals Intelligence (SIGINT) | Ideal for wide-spectrum monitoring, scanning, and direction finding (DF). Its high gain and narrow beamwidth allow for the precise triangulation of rogue emitters. |
| Public Safety & Search and Rescue | Used by emergency response units for wideband interoperable communications during disaster recovery where multiple frequency bands are in use simultaneously. |
| Mobile Command Posts | Mounted on vehicles or tactical masts to provide a rapidly deployable directional link for field headquarters and remote surveillance outposts. |
| Coastal & Maritime Surveillance | Specifically designed for long-term deployment in saline environments to monitor maritime traffic and offshore communication bands. |
| Electronic Warfare (EW) | Acts as a high-intensity directional source for jamming VHF and UHF tactical data links and voice communications. |
| Signals Intelligence (SIGINT) | The highly directional 50° Horizontal / 45° Vertical beamwidth allows for accurate emitter triangulation and the interception of weak, long-range signals across a wide spectrum. |
| Spectrum Scanning | Its broad frequency response (135-470 MHz) makes it a "single-antenna" solution for persistent monitoring and persistent situational awareness. |
| Frequency stated in title | 135-470 MHz |
| Gain stated in title | 11 dBi |
| Category | Horn, Dish, Grid & Log Periodic |