| Model | LP-80-2000 |
| Frequency (manufacturer model field) | 80-2000MHz |
| Bandwidth (manufacturer model field) | 80-2000MHz |
| Gain (manufacturer model field) | 8 dBi. |
| Frequency Range | 80 - 2000 MHz |
| Gain | 8 dBi. |
| Bandwidth | 80-2000MHz |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 90 +/-10 Degrees Typical |
| Front to Back Ratio | 16 +/-2 dB. Typical |
| VSWR - Equal To or Better Then | Better Than 2.5:1 |
| RF Power Handling Capacity | 250 Watts (700 Watts Optional) |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 190 Km/Hr. |
| Overall Length | 2.2 Meters (87 Inches) |
| Shipping Length | 2.3 Meters (90 Inches) |
| Support Boom -Material - O.D. | 6063T6 Aluminum AlloySquare Tube |
| Elements - Materials- Cross Section - Outer Diameter | 6063T6 Aluminum AlloyRound Tube |
| Maximum Mount Pipe Diameter | 38-77mm (1.5-3 Inches) |
| Gross Weight | 7 Kgs. Typical |
| Operating Temperature | (-) 30 to +70 Degrees Celsius |
| Storage Temperature | (-) 40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Unloaded Frequency Efficiency | By utilizing full-sized radiating elements without lossy electrical loading, the antenna maintains a highly efficient radiation pattern and a stable 8 dBi gain across the entire bandwidth. |
| Rapid Tactical Deployment | Featuring foldable elements and a streamlined mounting arrangement, the system can be fully assembled by two technicians in less than 5 minutes. Elements are segmented for easy logistics and attach via a secure stainless steel stud system. |
| Polarization Agility | The mounting bracket is specifically engineered to allow for quick orientation changes between Horizontal and Vertical polarization, ensuring compatibility with diverse signal types in the field. |
| MIL-STD-810G Certified | The antenna is rigorously tested for high/low temperatures (-40°C to +70°C), shock, vibration, humidity, and salt fog. It is specifically treated for survival in the world's harshest climates. |
| Integrated D.C. Grounding | The system operates at D.C. ground, providing a low-resistance path for lightning protection and suppressing atmospheric static, resulting in an ultra-quiet noise floor for sensitive surveillance. |
| Marine-Grade Durability | All fasteners are made of Type 304 stainless steel, and the entire unit is finished with an epoxy-based Olive Green powder coating for total corrosion resistance in coastal or industrial zones. |
| Comprehensive 80–2000 MHz Coverage | Replaces multiple antennas for VHF, UHF, and L-Band. |
| High-Efficiency 8 dBi Gain | Focused directional performance across the entire wideband. |
| MIL-STD-810G Compliance | Engineered for extreme shock, vibration, and salt-fog environments. |
| Rapid 5-Minute Assembly | Foldable/segmented elements for streamlined tactical logistics. |
| Rear-End Mounting Clamp | Securely fits 38mm to 77mm (1.5-3 inch) heavy-duty masts. |
| D.C. Grounded Safety | Integrated lightning protection and enhanced noise immunity. |
| Aerodynamic 200 Km/Hr Rating | Designed for stability in high-wind conditions. |
| The Solution | The LP-80-2000’s flexible mounting allows you to match the polarization of the incoming reflected wave, ensuring a stable link or intercept when a direct line-of-sight is blocked. |
| Published detail | At the lower end of the band (80–150 MHz), signals diffract around large obstacles. At the higher end (1000–2000 MHz), they reflect sharply off metal and concrete. Both behaviors cause Polarization Rotation. |
| The Problem | A standard vertical whip antenna will experience a signal "null" or dropout of up to 20 dB if a target's signal rotates horizontally after hitting a building or a hillside. |
| The Tactical Solution | The LP-80-2000 features a flexible mounting arrangement that allows operators to switch between Horizontal and Vertical polarization in minutes. This ensures you can match the orientation of the incoming wave to maintain a stable intercept or high-fidelity link. |
| Power Density Focus | The 8 dBi gain acts as a "magnifying glass" for your RF energy. Instead of scattering 250W (or 700W) in all directions, the LP-80-2000 focuses that energy into a tight 70-degree floodlight. |
| Effective Radiated Power (ERP) | By concentrating the energy, you exponentially increase your ERP on the target receiver, allowing you to successfully "drown out" a legitimate signal from several kilometers away even with relatively low input power. |
| Vertical Orientation | Typically identifies standard mobile tactical units, vehicle-mounted whips, or handheld radios. |
| Horizontal Orientation | Often indicates fixed-site point-to-point relays, TV/broadcast backup links, or specialized NVIS (Near Vertical Incidence Skywave) links used for regional communication. |
| Rapid Signal Fluctuations | A signal that rapidly fades in and out often identifies a moving vehicle or aircraft as its angle of arrival and reflection points change in real-time. |
| Published detail | At frequencies approaching 2 GHz, sensitive SIGINT receivers are highly vulnerable to "Noise Floor" elevation, which can mask weak or "hidden" tactical signals. |
| Static Suppression | High-speed wind or dry air moving across the antenna elements creates "Precipitation Static" (P-Static). On an ungrounded antenna, this creates an electronic "hiss" that raises the noise floor. |
| The Solution | The LP-80-2000 is D.C. Grounded. It constantly bleeds off this static charge to the mast and earth, ensuring the lowest possible noise floor for detecting low-power transmissions. |
| Phase-Matched Feeders | If using multiple LP-80-2000 units for an array, use identical lengths of LMR-400 or LMR-600. Even a small difference in cable length causes phase shifts that degrade your system's performance. |
| Rapid 5-Minute Setup | Take advantage of the foldable elements. Ensure the stainless steel studs are tightened to spec; in high-vibration tactical environments, element security is vital for maintaining a stable VSWR. |
| Mast Stability | Because the beamwidth is 70 degrees, a 35-degree error in alignment will drop your gain significantly. Use a compass to ensure the antenna is pointed exactly at the target sector for maximum intercept probability. |
| Weather-Sealing | While the antenna is finished for severe environments, the N-Female connector is the most vulnerable point. Use butyl rubber tape to create a primary moisture seal on all outdoor connections to prevent VSWR spikes during rain. |
| Frequency stated in title | 80-2000 MHz |
| Gain stated in title | 8 dBi |
| Category | Horn, Dish, Grid & Log Periodic |