Skip to content
LPDP-20-1300 Dual Polarized LPDA \| 20-1300 MHz 7 dBi Strategic Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

LPDP-20-1300 Dual Polarized LPDA \| 20-1300 MHz 7 dBi Strategic Antenna

Updated 2026-11-19 · Markdown version

Model no. LPDP-20-1300

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelLPDP-20-1300
Frequency (manufacturer model field)20-1300MHz
Bandwidth (manufacturer model field)20-1300MHz
Gain (manufacturer model field)7 dBi
Frequency Range20 - 1300 MHz.
Gain7 dBi
BandwidthEntire Band
PolarizationVertical & Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points120 +/- 20 Degrees
Front to Back Ratio14 +/- 3 dB.
VSWR - Equal To or Better Then3:1
RF Power Handling Capacity250 Watts
Input Termination2 x N-Female
Lightning ProtectionDC ground
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating160 Km/Hr.
Overall Length6 Meters
Shipping Length3 Meters
Support Boom -Material - O.D.AluminumSquare Tube
Elements - Materials- Cross Section - Outer DiameterAluminumRound Tube
Insulator MaterialTeflon & Nylon
Maximum Mount Pipe Diameter50-76 mm (2-3 Inches)
Gross Weight85 Kgs.
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH
True Polarization DiversityEquipped with 2 x N-Female input ports, the antenna eliminates "polarization fading" by concurrently processing vertical and horizontal signal components. This is vital for intercepting tactical radios in complex terrain where signals may rotate significantly.
Unloaded EfficiencyTo maintain peak radiation efficiency, the LPDP-20-1300 uses full-sized radiating elements (the longest being 3.75 meters). This avoids the heat and power loss common in size-reducing loading techniques, ensuring a consistent 7 dBi gain across 95% of the 20-1300 MHz band.
Balanced Strategic MountingGiven its 85 kg weight and 7.5-meter wingspan, the antenna features a center-mount arrangement for secure installation on heavy-duty masts up to 102mm (4 inches).
Foldable Tactical ElementsElements are supplied in two segments to facilitate manageable shipping. Despite its 6-meter (20-foot) length, two operators can assemble the array within 10 minutes using simple hand tools.
Military-Grade DurabilityThe entire structure is finished with a protective powder coating. All hardware, including screws and bolts, is made from Type 316 marine-grade stainless steel, ensuring zero corrosion in salt-fog or high-humidity zones.
Direct Ground ProtectionThe system operates at D.C. ground, providing a low-resistance path for lightning and suppressing atmospheric static, resulting in an ultra-quiet noise floor for sensitive surveillance.
Dual-Polarized Cross-Element ArchitectureSimultaneous vertical and horizontal signal processing.
Massive 20–1300 MHz BandwidthCovers Strategic HF, Tactical VHF, Military UHF, and L-Band in one unit.
High-Power 500W RatingEngineered for high-duty cycle electronic countermeasures (ECM).
Strategic 6-Meter DesignOptimized for low-frequency efficiency without lossy electrical loading.
MIL-STD-810G CertifiedTested for extreme shock, vibration, humidity, and salt fog.
Direct Ground ProtectionIntegrated lightning protection and enhanced noise immunity.
Marine Grade 316 Stainless HardwareTotal corrosion resistance for the most severe environments.
Balanced Center MountingSecurely fits 50mm to 102mm (2-4 inch) heavy-duty masts.
The SolutionBy monitoring both ports simultaneously, the LPDP-20-1300 ensures that if a signal "fades" on the vertical plane, it is captured on the horizontal, preventing critical data loss.
Published detailAt the lower end (20–100 MHz), signals tend to diffract or "wrap" around obstacles. At the higher end (500–1300 MHz), they reflect off surfaces like glass and concrete. Both behaviors cause Polarization Rotation.
The "Null" ProblemA standard vertical monitoring antenna will experience a signal "null" or dropout of up to 20–30 dB if a target's signal rotates horizontally after hitting a building or traveling through the ionosphere.
The Tactical SolutionBy utilizing both the Vertical and Horizontal ports of the LPDP-20-1300, your receiver captures both components of the wave simultaneously. This ensures you never lose a critical voice transmission or high-speed data burst, regardless of how the signal has bounced.
Dual-Plane SaturationMany modern high-end radios use diversity antennas to "dodge" jammers. By feeding 500 Watts into both ports of the LPDP-20-1300, you saturate both the E (Electric) and H (Magnetic) planes. This leaves the target radio with no "clean" orientation to receive data.
Directional Power DensityThe 7 dBi gain concentrates that 500W into a 100-degree floodlight. This dramatically increases the Jamming-to-Signal (J/S) ratio compared to an omnidirectional antenna, allowing you to suppress targets at significantly greater distances.
Vertical DominanceConfirms standard mobile tactical units, maritime vessels, or ground-based infantry whips.
Horizontal DominanceIndicates fixed-site point-to-point relays, TV/Broadcast backup links, or specialized NVIS (Near Vertical Incidence Skywave) links used for regional communication over mountainous terrain.
Rapid Polarization ShiftingA signal that rapidly moves between V and H ports often identifies a moving vehicle or aircraft as the signal bounces off changing terrain features.
The 14 dB ShieldThe LPDP-20-1300 radiates 14 dB less energy out of the back than the front. This allows your EW team to operate their own Command & Control (C2) equipment directly behind the antenna without being "blinded" by their own high-power jamming signal.
Feeder ManagementUse high-quality, phase-matched LMR-600 or 1/2" corrugated cables. While loss is lower at VHF, it becomes significant at 1300 MHz. Ensure all 500W reaches the elements to maintain effective power density at the target.
Mast StabilityDue to the 7.5-meter width and 85 kg weight, use a heavy-duty 102mm (4-inch) steel or reinforced aluminum mast. Ensure the center-mount clamp is torqued correctly to prevent "spinning" in high winds.
Grounding for Noise FloorEnsure the mast is grounded to a copper rod. The D.C. Grounded design of the LPDP-20-1300 is vital for bleeding off the atmospheric static that can drown out weak SIGINT signals during storms or high-wind events.
Logistic ManagementTake advantage of the 10-minute assembly feature. Even for an antenna of this scale, the foldable segments allow for relatively fast setup in a tactical forward position once the main mast is secured.
Frequency stated in title20-1300 MHz
Gain stated in title7 dBi
CategoryHorn, Dish, Grid & Log Periodic

Description

LPDP-20-1300 Dual Polarized LPDA \| 20-1300 MHz 7 dBi Strategic Antenna is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Frequency Range: 20 – 1300 MHz.
  • Gain: 7 dBi
  • Polarization: Vertical & Horizontal
  • Model: LPDP-20-1300
  • Frequency (manufacturer model field): 20-1300MHz
  • Bandwidth (manufacturer model field): 20-1300MHz
  • Gain (manufacturer model field): 7 dBi
  • Bandwidth: Entire Band

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for LPDP-20-1300 Dual Polarized LPDA \| 20-1300 MHz 7 dBi Strategic Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of LPDP-20-1300 Dual Polarized LPDA \| 20-1300 MHz 7 dBi Strategic Antenna?

Frequency Range: 20 - 1300 MHz.; Gain: 7 dBi; Polarization: Vertical & Horizontal; Model: LPDP-20-1300; Frequency (manufacturer model field): 20-1300MHz; Bandwidth (manufacturer model field): 20-1300MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote