| Model | LP-100-1000 |
| Frequency (manufacturer model field) | 100-1000MHz |
| Bandwidth (manufacturer model field) | 100-1000MHz |
| Gain (manufacturer model field) | 9 dBi |
| Frequency Range | 100-1000MHz |
| Gain | 9 dBi |
| Bandwidth | 100-1000MHz |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 90 +/-10 Degrees Typical |
| Vertical Beamwidth -Half Power Points | 65 +/-10 Degrees Typical |
| Front to Back Ratio | 18 +/-2 dB. Typical |
| VSWR - Equal To or Better Then | 2.5:1 |
| RF Power Handling Capacity | 250 Watts CW |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 200 Km/Hr. |
| Overall Length | 1.8 Meters (71 Inches) |
| Shipping Length | 1.9 Meters (75 Inches) |
| Support Boom -Material - O.D. | 6063T6 Aluminum AlloySquare Tube |
| Elements - Materials- Cross Section - Outer Diameter | 6063T6 Aluminum AlloyRound Tube |
| Mounting Clamps Position | At Rear End of Boom |
| Maximum Mount Pipe Diameter | 52 mm (2 Inches) |
| Gross Weight | 5 Kgs. |
| Operating Temperature | (-) 30 to +70 Degrees Celsius |
| Storage Temperature | (-) 40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Published detail | The LP-100-1000 is optimized for operators who require gapless spectrum coverage from 100 MHz to 1 GHz without the logistical burden of multiple antennas. |
| Elite 9 dBi Gain Efficiency | By utilizing full-sized radiating elements across its 1.8-meter frame, the LP-100-1000 maintains superior radiation efficiency and a focused 65-degree horizontal beamwidth. This ensures maximum energy concentration for both reception and high-power transmission. |
| Rapid 5-Minute Assembly | Featuring foldable elements and a stainless steel stud system, the antenna can be fully assembled by two technicians in less than 5 minutes. This facilitates rapid "jump" missions and mobile command post setups. |
| Rear-End Mounting Advantage | The antenna is supplied with a rear-end mounting bracket as standard, ensuring the support mast remains completely outside the radiation pattern to prevent gain degradation. A "Center of Gravity" mount is available for specialized weight-balanced deployments. |
| MIL-STD-810G Certified | Rigorously tested for extreme temperature, shock, vibration, rain, and salt fog. It is specifically treated for survival in coastal, monsoon, or desert environments. |
| Marine-Grade Durability | All fasteners (screws, nuts, and bolts) are made of Type 316 marine-grade stainless steel. The entire unit is protected by an epoxy-based Olive Green powder coating for total corrosion resistance and tactical low visibility. |
| Integrated Safety | Operates at D.C. ground, providing a low-resistance discharge path for lightning and suppressing atmospheric static to ensure an ultra-quiet noise floor for high-sensitivity surveillance. |
| Comprehensive 100–1000 MHz Coverage | One antenna for aeronautical, tactical, and public safety bands. |
| High-Efficiency 9 dBi Gain | Focused directional precision for long-range intercepts. |
| Fast 5-Minute Assembly | Segmented components for streamlined tactical logistics. |
| Polarization Agility | Permits quick changes between Vertical and Horizontal orientation. |
| Cross Polarization Discrimination | Superior 23 dB discrimination ensures high signal isolation and clarity. |
| Published detail | In the signal-dense 100-1000 MHz band, isolating specific tactical or aviation links requires a surgical directional focus. |
| The Precision Advantage | The focused 65-degree beamwidth acts as a directional "spotlight." This allows an operator to isolate a specific target while physically "nulling out" interference from neighboring channels or reflective obstacles. |
| Published detail | Across the 100–1000 MHz range, radio waves transition from terrain-following behaviors to strictly "optical" line-of-sight propagation. |
| The Precision Advantage | The focused 65-degree horizontal beamwidth of the LP-100-1000 acts as an RF "spotlight." This allows an operator to isolate a specific aircraft's transmission or a tactical repeater while physically "nulling out" interference from neighboring urban noise. |
| Range Extension | Every 6 dB of gain effectively doubles your reception range. The 9 dBi gain allows you to pull in weak signals from distances where standard omnidirectional antennas would only see static. |
| Published detail | UHF signals (above 300 MHz) reflect sharply off glass, metal, and concrete. Each reflection can cause the signal's polarization to shift—a phenomenon known as Polarization Rotation. |
| The "Null" Problem | Most tactical handhelds are vertically polarized. If a signal reflects off a slanted roof or metal structure, it may arrive at your site with a significant horizontal shift. A standard vertical antenna would experience a signal dropout of up to 20 dB. |
| The Tactical Solution | The LP-100-1000 features a flexible mounting arrangement that allows operators to switch between Horizontal and Vertical polarization in seconds. Its superior 23 dB Cross-Polarization Discrimination ensures that when you switch polarizations, you are truly isolating the target signal from background clutter. |
| Published detail | To successfully disrupt a target link (e.g., a 400 MHz emergency net or a 900 MHz telemetry uplink), you must achieve a superior Jamming-to-Signal (J/S) ratio at the victim’s receiver. |
| Published detail | 250W Continuous Power: The LP-100-1000 acts as a powerful directional "floodlight." Its 9 dBi gain acts as an RF magnifying glass, concentrating 250 Watts of energy into a focused 65-degree cone. |
| ERP Advantage | This concentration exponentially increases your Effective Radiated Power (ERP). This allows an operator to successfully "drown out" a legitimate signal from several kilometers away, even when the adversary is using high-power mobile transmitters. |
| The Solution | The LP-100-1000 is D.C. Grounded. It constantly bleeds off this static charge to the mast and earth. This ensures the lowest possible noise floor, allowing you to detect low-power "hidden" transmissions or weak signals that would be buried in the static of an ungrounded antenna. |
| Rapid 5-Minute Setup | Take full advantage of the foldable elements. In modern EW, speed is survival. The LP-100-1000's speed of assembly (under 5 minutes) is a key survivability feature for "jump" missions. |
| Cable Integrity | In the 1000 MHz (1 GHz) range, cable loss becomes significant. Do not use standard RG-58. Use LMR-400 or LMR-600. Every 3 dB of cable loss effectively cuts your jamming power or reception sensitivity in half. |
| Rear-Mount Advantage | Since the mount is at the rear of the boom, the 2-inch metal mast remains completely behind the antenna. This prevents "Mast Shadowing," which would otherwise distort the 65-degree beam. |
| Boresight Alignment | Because the beamwidth is 65 degrees, a 32-degree error in alignment will drop your gain significantly. Use a compass to ensure the antenna is pointed exactly at the target sector for maximum intercept probability. |
| Frequency stated in title | 100-1000 MHz |
| Gain stated in title | 9 dBi |
| Category | Horn, Dish, Grid & Log Periodic |