| Model | LP-30-2000 |
| Frequency (manufacturer model field) | 30-2000 MHz |
| Bandwidth (manufacturer model field) | 30-2000 MHz |
| Gain (manufacturer model field) | 9dBi |
| Frequency Range | 30-2000 MHz |
| Gain | 9dBi |
| Bandwidth | Entire Band |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 90 +/-10 Degrees |
| Front to Back Ratio | 16 +/-2 dB. |
| VSWR - Equal To or Better Then | <1:2.5 |
| RF Power Handling Capacity | 500 Watts |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 180 KMPH |
| Overall Length | 5.2 Meters |
| Shipping Length | 3.7 Meters |
| Support Boom -Material - O.D. | AluminumSquare Tube |
| Elements - Materials- Cross Section - Outer Diameter | AluminumRound Tube |
| Insulator Material | Teflon & Delrin |
| Maximum Mount Pipe Diameter | 51-102mm (2-4 Inches) |
| Gross Weight | 30 Kgs. |
| Operating Temperature | (-)30 to + 70 Degrees Celsius |
| Storage Temperature | (-)40 to + 80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Ultra-Wideband 30–2000 MHz Coverage | This antenna eliminates the logistical burden of multiple narrow-band arrays. It is perfectly suited for multi-role missions including signal monitoring, broadband scanning, and high-intensity jamming of tactical networks. |
| High-Intensity 500W Power Handling | Engineered for continuous-duty electronic attack, the array manages up to 500 Watts of RF throughput (with higher options available), ensuring a dominant Jamming-to-Signal (J/S) ratio. |
| Directional 8 dBi Gain | By focusing RF energy into a defined 80-degree horizontal beam, the antenna provides superior standoff range while maintaining a 16 dB Front-to-Back ratio to protect friendly personnel behind the array. |
| Pure LPDA Architecture | The array uses full-sized radiating elements without loading techniques. This "pure" design ensures maximum efficiency and linear performance across its massive 1.97 GHz bandwidth. |
| Compact Logistics | The antenna’s 2.6-meter shipping length makes it highly suitable for mobile and tactical transport in standard vehicles or containers. |
| MIL-SPEC Environmental Protection | The entire structure is protected by an epoxy-based powder coating in Olive Green. All hardware consists of 316 marine-grade stainless steel, providing immunity to the saline corrosion found in coastal theaters. |
| D.C. Grounded Protection | The antenna operates at D.C. ground, providing a safe discharge path for lightning and bleeding off static noise for high-fidelity surveillance. |
| Unified 30–2000 MHz Coverage | A single feed point for the entire VHF/UHF tactical band. |
| Switchable Polarization | The mounting arrangement allows for easy rotation between horizontal and vertical polarization. |
| Heavy-Duty Wind Rating | Built to withstand environmental stress and wind speeds up to 180 Km/Hr. |
| N-Female Termination | Industry-standard connection for high-power coaxial integration. |
| Center-Boom Mounting | Balanced mounting for 38-75 mm (1.5-3 inch) diameter masts. |
| RCIED Neutralization | Covers the entire 30–2000 MHz threat profile for Remote Controlled Improvised Explosive Devices. This includes everything from legacy long-wavelength VHF triggers to modern GSM/CDMA/UMTS cellular initiators. |
| Tactical Communications Jamming | The 16 dB Front-to-Back ratio is critical for "Self-Protection." It allows a jamming team to suppress enemy VHF/UHF tactical nets (30–512 MHz) while minimizing the "Electronic Fratricide" or interference caused to their own command post located in the antenna’s rear lobe. |
| Power Density | By compressing the signal into an 80-degree horizontal beam, the LP-30-2000 creates a much higher Jamming-to-Signal (J/S) ratio than an omni-directional antenna. This is vital for "breaking" the link between a drone and its controller in C-UAS missions. |
| Wideband Search & Intercept | Because the antenna does not use loading techniques, it provides a consistent noise floor across the entire 1.97 GHz bandwidth. This allows automated SIGINT receivers to scan from the VHF tactical band to the L-band GNSS/Sat-com bands without impedance-mismatch "blind spots." |
| Direction Finding (DF) Compatibility | The sharp 80° Horizontal / 60° Vertical beamwidth allows for "Line-of-Bearing" (LOB) estimation. By rotating the antenna for maximum signal strength (RSSI), operators can triangulate the location of an enemy transmitter with high accuracy. |
| Polarization Agility | The ability to switch between Horizontal and Vertical polarization in the field is vital for Intercept. Many high-band data links are horizontally polarized, while tactical radios are vertical; the LP-30-2000 handles both with a simple mechanical rotation. |
| D.C. Grounded Safety | The low-resistance discharge path bleeds off P-Static (Precipitation Static) caused by wind and rain. For monitoring teams, this results in a cleaner signal with less "grass" or background noise, allowing for the detection of weak, low-power "burst" transmissions. |
| Multi-Mission Monitoring | One LP-30-2000 can simultaneously monitor:VHF Low/High: Tactical radio and Air Traffic Control.UHF: Public safety, LMR, and telemetry.Cellular: GSM 900, GSM 1800, CDMA, and UMTS 2100. |
| VHF Low/High | Tactical radio and Air Traffic Control. |
| UHF | Public safety, LMR, and telemetry. |
| Cellular | GSM 900, GSM 1800, CDMA, and UMTS 2100. |
| Coastal & Extreme Resilience | The MIL-STD-810G salt-fog and fungus resistance makes it compatible with persistent littoral (coastal) surveillance where standard antennas would fail due to corrosion within months. |
| Frequency stated in title | 30-2000 MHz |
| Gain stated in title | 8 dBi |
| Category | Horn, Dish, Grid & Log Periodic |