Skip to content
LP-100-3000 Tactical Log Periodic Antenna \| 100-3000 MHz \| 8 dBi \| MIL-STD-810G
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

LP-100-3000 Tactical Log Periodic Antenna \| 100-3000 MHz \| 8 dBi \| MIL-STD-810G

Updated 2026-11-19 · Markdown version

Model no. LP-100-3000

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelLP-100-3000
Frequency (manufacturer model field)100-3000MHz
Bandwidth (manufacturer model field)100-3000MHz
Gain (manufacturer model field)8 dBi
Frequency Range100-3000 MHz
Gain6 dBi
Bandwidth100-3000MHz
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points80 Degrees
Front to Back Ratio14 +/-2 dB.
VSWR - Equal To or Better Then3.0:1
RF Power Handling Capacity200 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating190 Km/Hr.
Overall Length1.7 Meters
Shipping Length1.8 Meters
Support Boom -Material - O.D.AluminumSquare Tube
Elements - Materials- Cross Section - Outer DiameterAluminumRound Tube
Insulator MaterialTeflon
Maximum Mount Pipe Diameter52 mm (2 Inches)
Gross Weight5 Kgs.
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH
Ultra-Wideband CoverageContinuous frequency range from 100 MHz to 3000 MHz with no "dead spots."
Constant Gain PerformanceMaintains a stable 8 dBi gain across the entire operational window, ensuring consistent signal sensitivity.
Radiation Pattern FocusFeatures a 70° horizontal and 60° vertical beam-width, optimized for both precision target illumination and wide-area spectrum scanning.
Elite Interference RejectionTypical Front-to-Back ratio of 16 dB and Cross-Polarization Discrimination of 23 dB ensure target signal integrity in dense RF environments.
Power AgilityStandard 150-watt RF power handling, with an optional 500-watt upgrade available for high-intensity jamming applications.
Lightning ProtectionOperates at D.C. Ground with a low-resistance discharge path to safeguard connected receivers from static and lightning strikes.
MaterialsSupport booms are constructed from 6063T6 aluminum square tubes, while radiating elements utilize high-strength round tubes for optimal aerodynamics.
Modular "Quick-Build" DesignThe antenna features removable elements and a specialized mounting arrangement that allows for full assembly in less than 5 minutes.
Logistical OptimizationElements are supplied in two segments to minimize shipping volume. The overall shipping length is capped at 6.6 feet (1.7 meters), making it highly portable.
Marine-Grade HardwareAll screws, nuts, and bolts are manufactured from Type 304 Grade Stainless Steel to prevent seized hardware in field conditions.
Polarization VersatilityThe rear-mounted universal clamp permits a fast transition between Vertical and Horizontal polarization.
Mounting InterfaceRobust dual-clamp system accommodates mast diameters from 52mm to 77mm (2–3 inches).
Low & High TemperatureOptimized for Method 500.5 and 502.5 (Procedures I & II), operational from -30°C to +70°C.
HumidityCompliant with Method 507.5 for high-saturation tropical environments.
Shock & VibrationCertified under Method 516.6 (Procedure IV) and Method 514.6 (Procedure I) for vehicle-mounted and tactical transport stability.
Salt Fog & FungusCompliant with Method 509.5 and 508.6, ensuring the materials will not degrade in coastal or jungle theaters.
RainTested under Method 506.5 for performance during heavy driving rain and wind-blown moisture.
Wind RatingStructurally rated for survival in hurricane-force winds up to 200 Km/Hr (125 MPH).
Epoxy DefenseThe entire array is finished with a high-quality epoxy-based powder coating providing a hermetic seal against salt spray and acid rain.
Tactical FinishSupplied in Olive Green (RAL 6003) to minimize visual signature and provide enhanced UV protection.
Mechanical SpacersIntegration of extra internal spacers between support booms prevents "boom-flex" and ensures element alignment during high-vibration events.
Zero-Loading EfficiencyUnlike smaller broadband antennas that use "loading" techniques (which dissipate power as heat), the LP-100-3000 uses full-sized, optimized elements. This ensures maximum signal radiation and sensitivity across the entire 100–3000 MHz range.
Constant Gain ArchitectureThis antenna maintains a stable 8 dBi gain across a 3 GHz bandwidth. This "flat" gain response is critical for calibrated monitoring and ensuring that jamming power is distributed evenly across the spectrum.
Rapid Field AssemblyFeaturing a "Quick-Build" modular design, the antenna can be transitioned from its transport case to a fully operational state in under 5 minutes. This is a vital advantage for "comms-on-the-pause" or rapid-response tactical teams.
Integrated Lightning DefenseThe antenna operates at D.C. Ground, providing an inherent low-resistance path to earth. This safeguards sensitive and expensive front-end receivers from static buildup and lightning-induced surges.
Published detailThis guide outlines how to leverage the antenna’s ultra-wideband capabilities (100 - 3000 MHz) for strategic dominance in the RF spectrum.
RCIED NeutralizationIts coverage starts at 100MHz, allowing for the suppression of lower-frequency remote-controlled improvised explosive device (RCIED) triggers, such as long-range VHF pagers and handheld radios.
Targeted Communication JammingThe directional $8\text{ dBi}$ gain focuses the 500 Watts of RF energy into a tight aperture (70 degrees horizontal). This "spot jamming" capability allows an operator to deny a specific target’s comms while reducing the "friendly fire" interference to nearby allied units.
GPS/GNSS DenialThe upper end of the spectrum (1500 - 1600MHz) can be utilized for directional spoofing or jamming of navigation signals, protecting high-value assets from precision-guided threats.
Published detailIn a SIGINT role, the LP-100-3000 acts as a highly sensitive "directional ear," capable of pulling weak signals out of the noise floor across a 3 GHz span.
VHF/UHF InterceptMonitor tactical push-to-talk (PTT) radios and air-to-ground communications in the 100 – 500MHz range.
S-Band SurveillanceDetect and identify high-frequency data links, cordless backhauls, and drone control signals 2.4 GHz).
Flat Gain responseBecause the gain is constant (8 dBi), SIGINT operators can perform accurate Signal Strength Analysis and Direction Finding (DF) without needing to recalibrate for different frequency hops.
Cross-Polarization Discrimination (23dB)Critical for identifying the polarization of an enemy signal. Operators can rotate the antenna to match the target's polarization, increasing intercept probability by up to 20dB compared to a mismatched antenna.
D.C. GroundingEssential for high-power jamming. The direct ground path prevents static buildup on the elements during high-wattage transmissions, protecting the internal components of your 500W amplifier.
Method 514.6 (Vibration)Tested for survival on vehicle-mounted masts traveling over rugged terrain.
Method 509.5 (Salt Fog)High-quality epoxy coating prevents the 500W feed point from corroding in coastal theaters, where salt spray can cause arcing in high-power systems.
Frequency stated in title100-3000 MHz
Gain stated in title8 dBi
CategoryHorn, Dish, Grid & Log Periodic

Technical parameters

ApplicationPrimary BenefitTarget Spectrum
JammingHigh Power + Directivity100-3000 MHz
SIGINTWideband Scanning100-3000 MHz
Tactical CommsRapid DeploymentVHF/UHF/S-Band
Site SurveyFlat Gain ResponseEntire 3 GHz Band
FeatureStandard LP-100-3000500W High-Power Version
Primary UseMonitoring, Receiving, ScanningActive Jamming, EW, High-Power TX
Power Handling150 Watts CW500 Watts CW
Feed SystemStandard N-FemaleHeavy-Duty N-Female / Reinforced Feed
Thermal DefenseStandardEnhanced Heat Dissipation Spacers

Description

LP-100-3000 Tactical Log Periodic Antenna \| 100-3000 MHz \| 8 dBi \| MIL-STD-810G is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Frequency Range: 100-3000 MHz
  • Gain: 6 dBi
  • Polarization: Vertical or Horizontal
  • Model: LP-100-3000
  • Frequency (manufacturer model field): 100-3000MHz
  • Bandwidth (manufacturer model field): 100-3000MHz
  • Gain (manufacturer model field): 8 dBi
  • Bandwidth: 100-3000MHz

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for LP-100-3000 Tactical Log Periodic Antenna \| 100-3000 MHz \| 8 dBi \| MIL-STD-810G?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of LP-100-3000 Tactical Log Periodic Antenna \| 100-3000 MHz \| 8 dBi \| MIL-STD-810G?

Frequency Range: 100-3000 MHz; Gain: 6 dBi; Polarization: Vertical or Horizontal; Model: LP-100-3000; Frequency (manufacturer model field): 100-3000MHz; Bandwidth (manufacturer model field): 100-3000MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote