| Model | AP-145032 |
| Frequency (manufacturer model field) | 1300-1600MHz |
| Bandwidth (manufacturer model field) | 150MHz |
| Gain (manufacturer model field) | 32 dBi. |
| Frequency Range | 1300-1600 MHz |
| Gain | 32 dBi. |
| Bandwidth | 150 MHz. |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms. |
| Radiation Pattern | Directional |
| Beamwidth -3dB. | 3.5 Degrees. |
| Front to Back Ratio | 38 dB. |
| VSWR - Equal To or Better Then | 1:1.5 |
| RF Power Handling Capacity | 250 Watts. |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | Aluminum |
| Mounting Hardware -Materials | Stainless Steel |
| Weight | 200 Kgs. |
| Wind Rating | 190 Km/Hr. |
| Support Pipe O.D. | 76 mm (3 Inch) |
| Support Pipe Material | Aluminum |
| Diameter of Parabolic Reflector | 4.0 Meters |
| Radiating Material | Brass |
| Grid Members Material | Aluminum Tube - 5/8 Inch |
| Maximum Mount Pipe Diameter | 115 mm( 4.5 Inches.) |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Elite Link Gain | Delivers a mid-band gain of 32 dBi. This extreme gain allows for high-fidelity signal transmission over vast geographical distances, overcoming path loss that would render smaller antennas ineffective. |
| Razor-Sharp Directivity | Features an ultra-narrow 3.5-degree beam-width at the -3 dB half-power points. This pinpoint accuracy ensures that RF energy is concentrated entirely on the target receiver, providing high security and massive immunity to co-site interference. |
| Superior Signal Isolation | Front-to-Back Ratio: 42 dB, effectively eliminating noise and interference from behind the antenna.Cross-Polarized Discrimination: 38 dB, ensuring that the high signal-to-noise ratio (SNR) required for advanced digital modulation schemes is maintained. |
| Front-to-Back Ratio | 42 dB, effectively eliminating noise and interference from behind the antenna. |
| Cross-Polarized Discrimination | 38 dB, ensuring that the high signal-to-noise ratio (SNR) required for advanced digital modulation schemes is maintained. |
| High-Efficiency Feed | Utilizes a primary feed horn with an Air-Cored transmission line. The radiating elements are manufactured from high-quality brass to ensure maximum electrical conductivity and minimal internal resistive loss. |
| Electrical Protection | Operates at direct D.C. ground with a low-resistance discharge path, shielding sensitive ground-station radio equipment from lightning-induced transients and atmospheric static. |
| Massive Reflector Architecture | The 4-meter (13.2-foot) diameter grid is constructed from 6063T6 architectural-grade anodized aluminum alloy. The open-frame grid design (16 mm members) significantly lowers the structural torque on the tower by allowing wind to pass through the reflector. |
| Dual Side Struts | Supplied with two support struts as standard to provide extra rigidity, ensuring the massive parabolic shape remains stable under mechanical stress. |
| Elevation Tracking | Features an integrated fine-adjustment mechanism providing +/- 5 degrees of movement to "dial in" the perfect link. |
| Polarization Versatility | The rear mounting hardware permits a 90-degree rotation to switch between Horizontal and Vertical polarization in the field. |
| Industrial Hardening | Marine-Grade Fasteners: All screws, nuts, and bolts are made from Type 316 Stainless Steel to prevent oxidation and galvanic corrosion.Quick Fastener System: Despite its size, the primary feed fits into the assembly with a quick-release system for more efficient field installation. |
| Marine-Grade Fasteners | All screws, nuts, and bolts are made from Type 316 Stainless Steel to prevent oxidation and galvanic corrosion. |
| Quick Fastener System | Despite its size, the primary feed fits into the assembly with a quick-release system for more efficient field installation. |
| Heavy-Duty Mounting | Designed for vertical erected masts with a maximum diameter of 115 mm (4.5 inches). |
| Hurricane-Rated Resilience | Despite its surface area, the grid design enables a wind rating of 190 Km/Hr (118 MPH), making it suitable for coastal and high-altitude deployments. |
| Thermal Hardening | Fully operational in temperature extremes from -30°C to +70°C, and storage-rated from -40°C to +80°C. |
| Corrosion Defense | The aluminum components are anodized and finished with an epoxy-based anti-corrosive powder coating in military Olive Green, protecting the structure from salt fog, acid rain, and UV degradation. |
| Humidity Tolerance | Certified for operation in 0 to 95% RH environments without signal drift or structural degradation. |
| Exceptional Link Margin | The primary advantage is its massive 32 dBi gain. This provides the necessary power to establish ultra-long-distance point-to-point hops, effectively bridging gaps between remote tactical sites or regional infrastructure hubs where path loss is severe. |
| Surgical Directivity | With a 3.5-degree beam-width, the antenna focuses RF energy with clinical precision. This not only maximizes signal reach but also ensures the link is inherently secure and highly resistant to interception or co-site interference. |
| Superior Signal Isolation | Featuring a 42 dB Front-to-Back ratio, the AP-145032 is effectively "blind" to noise and signals originating from behind the station. Combined with 38 dB cross-polarized discrimination, it provides the high signal-to-noise ratio (SNR) required for high-speed digital backhaul. |
| Low Wind Loading | Unlike solid parabolic dishes of this size, the grid architecture allows wind to pass through the reflector. This significantly reduces the structural torque on the tower, allowing a 13.2-foot dish to be safely mounted in environments where a solid dish would be structurally impossible. |
| Dynamic Alignment | The integrated elevation tracking mechanism (+/- 5 degrees) and dual side struts allow for extensive fine-tuning and mechanical stability. This is critical for optimizing links across uneven terrain where atmospheric conditions may impact signal alignment. |
| Published detail | 1427-1535 MHz Band Optimization: Specifically engineered to provide peak performance in this vital L-Band/UHF crossover segment, ensuring compliance and efficiency for modern digital radio links. |
| Infrastructure Consolidation | By enabling longer-distance hops with high stability, the AP-145032 can reduce the total number of relay towers required for a cross-country link, lowering overall capital and maintenance expenditures. |
| Theater-Hardened Resilience | Constructed from anodized 6063T6 aluminum with 316 stainless steel fasteners, the antenna is immune to salt fog and high humidity. The epoxy-based powder coating ensures the structure survives decades in harsh coastal or industrial climates. |
| Electrical Equipment Shielding | The direct D.C. ground operation provides an immutable discharge path for lightning, protecting expensive and sensitive ground-station radio equipment from damage. |
| Published detail | 3. Long-Range L-Band Communication: Ideally suited for operations in the 1.4 GHz range, including specialized government and industrial data links that require more gain than standard-sized dishes can provide. |
| Frequency stated in title | 1300-1600 MHz |
| Gain stated in title | 32 dBi |
| Category | Horn, Dish, Grid & Log Periodic |