| Model | LPHP-500-2500 |
| Frequency (manufacturer model field) | 500-2500MHz |
| Bandwidth (manufacturer model field) | 500-2500MHz |
| Gain (manufacturer model field) | 9 dBi |
| Frequency Range | 500-2500 MHz. |
| Gain | 9 dBi |
| Bandwidth | Entire Band |
| Polarization | Horizontal or Vertical |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 65 +/-5 Degrees |
| Front to Back Ratio | 18 +/-2dB. |
| VSWR - Equal To or Better Then | 1:2.5 |
| RF Power Handling Capacity | 650 Watts |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 200 Km/Hr. |
| Overall Length | 660 mm |
| Shipping Length | 750 mm |
| Support Boom -Material - O.D. | AluminumSquare Tube |
| Elements - Materials- Cross Section - Outer Diameter | AuminumRound Rod |
| Mounting Clamps Position | At the back end of the boom |
| Maximum Mount Pipe Diameter | 51 mm (2 Inches) |
| Gross Weight | 3 Kgs. |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Ultra-Wideband Spectrum Dominance | Engineered for continuous, high-performance operation from 500 MHz to 2500 MHz, providing a "single-antenna" solution for UHF, GSM, LTE, and Wi-Fi bands without field tuning. |
| Welded Element Integrity | Unlike standard LPDAs, all radiating elements are fully welded to the square tube support booms. This eliminates RF inter-modulation (IM) and mechanical "rattle," which is critical for maintaining signal purity during high-power transmissions. |
| High-Intensity Power Handling | The architectural design supports a standard continuous 650 Watts RF power handling capacity, with a factory-available upgrade option for 1000 Watts (1 KW) to support strategic jamming. |
| Pure Dipole Efficiency | Utilizes a full-size dipole array without lossy loading coils, ensuring a flat, consistent 9 dBi gain response across the entire operating bandwidth. |
| Focused Aperture Precision | Delivers a directional beam with a 65-degree horizontal and 50-degree vertical beamwidth, facilitating accurate target acquisition and long-range link stability. |
| Lightning & Static Mitigation | Operates at Direct D.C. Ground with a low-resistance discharge path, shielding sensitive transmitters and receivers from static noise and lightning-induced surges. |
| Superior Signal Isolation | Achieves a 17 dB typical Front-to-Back ratio, effectively suppressing rearward interference and maximizing signal-to-noise (SNR) ratios in cluttered RF environments. |
| Low-Loss Termination Suite | Features a high-performance, low-loss coaxial cable assembly with an N-Female termination securely fixed to the heavy-duty mounting plate. |
| Optimized SWaP Profile | Maintains a compact footprint with a radome length of 650 mm and a gross weight of 4.5 Kgs, offering an elite gain-to-weight ratio for quick-deploy tactical masts. |
| Radome Shielding | Encased in a High-Tech Fiberglass Radome with excellent RF transparency. The tapered design minimizes the "sail effect" and prevents ice formation from detuning the antenna. |
| Thermal Extreme Performance | Certified for continuous operation in temperatures ranging from -40°C to +80°C (MIL-STD-810G, Method 500.5/502.5). |
| High-Velocity Wind Rating | Aerodynamically optimized to maintain structural integrity and bore-sight accuracy in constant winds up to 200 Km/Hr (125 MPH). |
| Corrosion-Proof Finish | Constructed from 6063T6 Anodized Aluminum with a final Epoxy Powder Coating (Military Olive Green), designed to resist salt-fog and chemical degradation (Method 509.5). |
| Mechanical Resilience | Fully tested for High-Impact Shock (Procedure IV) and Tactical Vibration (Procedure I), ensuring the welded elements remain intact during off-road vehicle transit. |
| Moisture & Ingress Protection | Fully sealed against 0 to 95% Relative Humidity and high-velocity horizontal rain (Method 507.5/506.5). |
| Biological Resistance | Materials are treated to resist Fungus Growth (Method 508.6), preventing structural or electrical degradation in dense jungle environments. |
| Inter-Modulation Free Performance | By utilizing a fully welded element architecture, the LPHP-500-2500 eliminates the "diode effect" often found in bolted or riveted antennas. This prevents the generation of unwanted harmonic signals and RF inter-modulation, ensuring ultra-clean transmission even at maximum power levels. |
| Ruggedized Radome Protection | The high-strength fiberglass radome acts as a tactical shield, protecting the radiating elements from physical impact, sand abrasion, and corrosive environments. Its tapered profile is specifically engineered to shed water and prevent ice accumulation, which can detune standard unprotected antennas. |
| High Power Density | Capable of handling 650 Watts standard (and 1 kW optional), this antenna is designed for high-duty cycle operations. It provides the necessary "punch" for long-range directional jamming and high-capacity data backhauls across the entire 500–2500 MHz window. |
| Superior Mechanical Stability | The use of 6063T6 architectural aluminum combined with internal extra spacers between support booms ensures the antenna maintains its electrical boresight. It is rated for extreme wind speeds of 200 Km/Hr, making it suitable for permanent installation on high-altitude towers or coastal masts. |
| Direct Ground Safety Suite | The antenna operates at D.C. ground, providing a permanent low-resistance path to the earth. This design choice effectively drains static build-up and protects sensitive transmitter final stages from lightning-induced surges. |
| Unified Wideband Solution | A single LPHP-500-2500 replaces the need for carrying multiple narrowband antennas for UHF, GSM, LTE, and Wi-Fi. This dramatically simplifies logistics, reduces tower wind loading, and lowers overall system costs. |
| Zero Performance Degradation | Because the internal array is protected within a high-tech radome, the antenna's VSWR and gain remain stable regardless of environmental moisture, salt fog, or dust, ensuring consistent link reliability. |
| Low Observability | The compact radome profile and Military Olive Green finish allow for discreet integration into tactical vehicles and camouflaged ground stations. |
| Electronic Warfare (EW) & Signal Denial | Optimized as a high-power directional source for jamming RCIED triggers, cellular communications (GSM/LTE), and Wi-Fi-based drone control links. |
| Signals Intelligence (SIGINT) & Monitoring | The clean noise floor and directional 9 dBi gain allow SIGINT operators to intercept, identify, and triangulate weak, long-range emitters across a massive 2 GHz span. |
| Tactical Communications & LTE Backhaul | Establishing secure, high-capacity directional data links for field headquarters, supporting high-speed video and voice traffic in the 500–2500 MHz range. |
| UAV Ground Control Stations (GCS) | Provides a high-reliability directional command and control link for tactical drones, ensuring high-bitrate telemetry feeds even at maximum operational ranges. |
| Coastal & Border Surveillance | Specifically designed for long-term deployment in saline or desert environments to monitor offshore and cross-border communication bands. |
| Mobile Command Posts | Mounted on vehicles or tactical masts to provide a rapidly deployable, high-power directional link for mobile headquarters and remote surveillance units. |
| High-Power Jamming Capability | With a standard capacity of 650 Watts (and 1 kW optional), this antenna is a potent source for high-duty cycle jamming. It can surgically saturate enemy frequencies to deny communications, navigation, and data links. |
| RCIED Defeat | Optimized for the directional suppression of Radio Controlled Improvised Explosive Devices (RCIEDs) by jamming common trigger frequencies found in the 500–2500 MHz window, including cellular and Wi-Fi bands. |
| Counter-UAV Operations | Acts as a high-intensity directional source for jamming rogue drone control links (C2) and video downlinks. Its high gain ensures that jamming energy remains effective at significant standoff distances. |
| Inter-Modulation (IM) Suppression | The fully welded element construction is critical for EW. It prevents the generation of unwanted harmonic interference that can "clutter" a friendly jammer's own signal or compromise the location of the jamming unit. |
| Precision Emitter Triangulation | The directional 9 dBi gain and narrow beamwidth allow SIGINT operators to perform high-accuracy Direction Finding (DF). By rotating the antenna, operators can pinpoint the exact azimuth of rogue or enemy emitters. |
| Weak Signal Recovery | The antenna’s clean noise floor and high sensitivity enable the interception of weak, long-range signals that are otherwise lost to background noise on omnidirectional or lower-gain antennas. |
| Wideband Spectrum Coverage | Covers the entire spectrum from 500 MHz to 2500 MHz simultaneously. This allows a monitoring system to scan from traditional UHF tactical bands up through GSM, LTE, and 2.4 GHz Wi-Fi frequencies without switching hardware. |
| Tactical "Electronic Tripwire" | When integrated into a persistent surveillance system, the LPHP-500-2500 serves as a directional watchdog, monitoring critical corridors, border zones, or coastal waters for unauthorized RF activity. |
| Multipath Immunity in Tunnels | The log periodic design is highly effective at maintaining signal integrity in high-reflection environments. It is ideal for monitoring wireless activity in military tunnels, bunkers, and metallic industrial complexes where multi-path interference typically degrades signal quality. |
| Discreet Integration | The compact, radome-protected profile and Military Olive Green finish allow for low-visibility installation on mobile surveillance vehicles (van-top or mast-mounted) and camouflaged ground stations. |
| UAV / Drone Links | 900 MHz, 1.2 GHz, and 2.4 GHz. |
| Cellular Networks | GSM 900, DCS 1800, PCS 1900, 3G/UMTS, and 4G LTE. |
| Tactical Data | UHF military communication bands. |
| Wireless Data | Wi-Fi (800/900/2400 MHz) and Bluetooth. |
| Frequency stated in title | 500-2500 MHz |
| Gain stated in title | 9 dBi |
| Category | Horn, Dish, Grid & Log Periodic |