AW-TV-UHF-17 470-862 MHz TV / Broadcast Antenna (17 dBi)
470-862 MHz tv / broadcast antenna — 17 dBi gain, horizontal polarization, F-Female connector.
AW-TV-UHF-17 — 470-862 MHz, tv / broadcast antenna
AW-TV-UHF-17 specifications
Model
AW-TV-UHF-17
Frequency Range
470–862 MHz
Gain
17 dBi
Polarization
Horizontal
Half-Power Beamwidth
32° (H) × 28° (V)
Dimensions
1250 × 420 × 150 mm
Connector
F-Female
Impedance
75 Ω
VSWR
≤ 2.5:1
Power Handling
5 W
Ingress Protection
IP54
Material / Radome
Aluminum elements / ABS boom
Designed for terrestrial broadcast reception, the AW-TV-UHF-17 is a 470-862 MHz tv / broadcast antenna rated at 17 dBi. Its horizontal polarization and tuned matching network keep return loss low across the full operating band.
Radiation Pattern and Gain
The half-power beamwidth is approximately 32 degrees in azimuth by 28 degrees in elevation, concentrating radiated energy toward the intended service area and improving signal-to-noise ratio at the cell edge. The rated gain of 17 dBi is referenced to an isotropic radiator.
Mechanical and Electrical Specifications
Mechanically, the AW-TV-UHF-17 measures 1250 x 420 x 150 mm and is housed in a Aluminum elements / ABS boom. The standard interface is a F-Female connector, with a nominal impedance of 75 ohms and a typical VSWR of 2.5:1 or better. The element withstands up to 5 W of input power.
Installation Guidance
The recommended installation is rooftop mast / balcony. The enclosure carries an IP54 environmental rating for outdoor exposure. For best results, mount the antenna with clear line of sight to the served area and bond all outdoor hardware to a proper grounding system.
Typical Applications
Terrestrial Broadcast Reception
Request a Quote
Need this antenna with a custom connector, cable length, or radome color? Use the antenna configurator to confirm the specification and submit an inquiry for AW-TV-UHF-17.
Advanced filters (dimension limits)
Frequently Asked Questions
What is a tv / broadcast antenna used for?
VHF and UHF terrestrial television receive antennas for DVB-T, DVB-T2, ATSC and ISDB-T reception.
Is AW-TV-UHF-17 suitable for terrestrial broadcast reception?
Yes. AW-TV-UHF-17 is well matched to terrestrial broadcast reception deployments, where its radiation pattern and gain provide reliable coverage and link margin.
Can the connector on AW-TV-UHF-17 be changed?
Yes. The default RF interface can be supplied as SMA, N-type, TNC, or other connectors on request, and custom cable assemblies are available. Specify your interface in the inquiry form.
What is the standard impedance and VSWR of AW-TV-UHF-17?
The nominal impedance is 50 ohms with a typical VSWR of 1.5:1 or better across the operating band. A 75 ohm option can be quoted for broadcast applications.
How do I request a quote for AW-TV-UHF-17?
Use the antenna configurator on this page to confirm the specification, then submit the inquiry form. An engineer from astronwireless.com will respond within one business day.
Accessories & Components
Complete your installation with matched RF cables, connectors, mounts, adapters and bulk coaxial cable. Custom assemblies, lengths and interfaces are available on request.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
