5.2-5.9 GHz ceramic patch antenna — 6 dBi gain, linear polarization, IPEX MHF (U.FL) connector.
AW-CP5800-6 — 5.2-5.9 GHz, ceramic patch antenna
AW-CP5800-6 specifications
Model
AW-CP5800-6
Frequency Range
5150–5850 MHz
Gain
6 dBi
Polarization
Linear
Half-Power Beamwidth
75° (H) × 75° (V)
Dimensions
30 × 30 × 4 mm
Connector
IPEX MHF (U.FL)
Impedance
50 Ω
VSWR
≤ 2.0:1
Power Handling
2 W
Material / Radome
Ceramic dielectric on FR4 ground
Operating across 5.2-5.9 GHz, the AW-CP5800-6 ceramic patch antenna provides 6 dBi gain and linear polarization. The design targets wi-fi 5 / wi-fi 6 deployments that demand reliable coverage and stable impedance matching.
Radiation Pattern and Gain
The half-power beamwidth is approximately 75 degrees in azimuth by 75 degrees in elevation, concentrating radiated energy toward the intended service area and improving signal-to-noise ratio at the cell edge. The rated gain of 6 dBi is referenced to an isotropic radiator.
Mechanical and Electrical Specifications
Mechanically, the AW-CP5800-6 measures 30 x 30 x 4 mm and is housed in a Ceramic dielectric on FR4 ground. The standard interface is a IPEX MHF (U.FL) connector, with a nominal impedance of 50 ohms and a typical VSWR of 2.0:1 or better. The element withstands up to 2 W of input power.
Installation Guidance
The recommended installation is embedded / internal. For best results, mount the antenna with clear line of sight to the served area and bond all outdoor hardware to a proper grounding system.
Typical Applications
Wi-Fi 5 / Wi-Fi 6
Drone / UAV Datalink
Embedded Module
Request a Quote
Need this antenna with a custom connector, cable length, or radome color? Use the antenna configurator to confirm the specification and submit an inquiry for AW-CP5800-6.
Advanced filters (dimension limits)
Frequently Asked Questions
What is a ceramic patch antenna used for?
High-dielectric ceramic patch elements for GNSS and short-range links, reflow-mountable or supplied with an LNA and coaxial pigtail.
Is AW-CP5800-6 suitable for wi-fi 5 / wi-fi 6?
Yes. AW-CP5800-6 is well matched to wi-fi 5 / wi-fi 6 deployments, where its radiation pattern and gain provide reliable coverage and link margin.
Can the connector on AW-CP5800-6 be changed?
Yes. The default RF interface can be supplied as SMA, N-type, TNC, or other connectors on request, and custom cable assemblies are available. Specify your interface in the inquiry form.
What is the standard impedance and VSWR of AW-CP5800-6?
The nominal impedance is 50 ohms with a typical VSWR of 1.5:1 or better across the operating band. A 75 ohm option can be quoted for broadcast applications.
How do I request a quote for AW-CP5800-6?
Use the antenna configurator on this page to confirm the specification, then submit the inquiry form. An engineer from astronwireless.com will respond within one business day.
Accessories & Components
Complete your installation with matched RF cables, connectors, mounts, adapters and bulk coaxial cable. Custom assemblies, lengths and interfaces are available on request.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
