RF Cable Assembly

ACC-CAB-IPEX-SMA-100 — RF Cable Assembly

Name: ACC-CAB-IPEX-SMA-100
Brand: astronwireless.com

RF Cable Assembly — IPEX MHF1 to SMA-Female connector, 50 Ω impedance, RG1.13, 100 mm.

ACC-CAB-IPEX-SMA-100 — RF Cable Assembly, IPEX MHF1 to SMA-Female interface

ACC-CAB-IPEX-SMA-100 specifications
Model	ACC-CAB-IPEX-SMA-100
Type	RF Cable Assembly
Connector Interface	IPEX MHF1 to SMA-Female
Impedance	50 Ω
VSWR (typical)	≤ 1.3:1
Frequency Range	DC – 6 GHz
Max Power Handling	10 W
Cable Grade	RG1.13
Cable Length	100 mm
Dimensions (L × W × H)	100 × 1 × 1 mm
Material	RG1.13 / gold-plated brass

The ACC-CAB-IPEX-SMA-100 is a compact rf cable assembly suited to rf interconnect. Its IPEX MHF1 to SMA-Female termination and 50 ohm impedance ensure clean signal transfer in demanding RF environments.

Specifications

Connector Interface	IPEX MHF1 to SMA-Female
Impedance	50 Ω
VSWR (typical)	1.3:1 or better
Frequency Range	DC – 6 GHz
Max Power	10 W
Cable Grade	RG1.13
Cable Length	100 mm
Material	RG1.13 / gold-plated brass
Dimensions (L × W × H)	100 × 1 × 1 mm

Cable Construction

This assembly uses RG1.13 coaxial cable. The high-density braided shield provides excellent RF isolation, and the pure-copper center conductor ensures low resistive loss over the full cable run. Custom lengths and alternative cable grades are available on request.

Typical Applications

RF Interconnect
Board-Level Integration

Request a Quote

Need a custom length, different connector combination, or bulk quantity pricing for ACC-CAB-IPEX-SMA-100? Contact us via the inquiry form below.

Frequency Band Required Gain (dBi) Polarization Installation Environment Antenna Type Connector (optional)

Advanced filters (dimension limits)

Max Length (mm) Max Width (mm) Max Height (mm)

Submit Your Inquiry

Technical Parameters

Target Frequency (MHz) Desired Gain (dBi) Polarization Connector Max VSWR Power Handling (W)

Business Information

Company / Name * Contact Name * Email * Phone (with country code) Country / Region Estimated Quantity Required Delivery

Application / Notes

Frequently Asked Questions

What is a rf cable assembly used for?

Coaxial RF cable assemblies with various connector combinations (SMA, N, IPEX, BNC, TNC, MMCX) in standard or custom lengths.

Is ACC-CAB-IPEX-SMA-100 suitable for rf interconnect?

Yes. ACC-CAB-IPEX-SMA-100 is well matched to rf interconnect deployments, where its radiation pattern and gain provide reliable coverage and link margin.

Can the connector on ACC-CAB-IPEX-SMA-100 be changed?

Yes. The default RF interface can be supplied as SMA, N-type, TNC, or other connectors on request, and custom cable assemblies are available. Specify your interface in the inquiry form.

What is the standard impedance and VSWR of ACC-CAB-IPEX-SMA-100?

The nominal impedance is 50 ohms with a typical VSWR of 1.5:1 or better across the operating band. A 75 ohm option can be quoted for broadcast applications.

How do I request a quote for ACC-CAB-IPEX-SMA-100?

Use the antenna configurator on this page to confirm the specification, then submit the inquiry form. An engineer from astronwireless.com will respond within one business day.