RF Cable Assembly — IPEX MHF1 to SMA-Female connector, 50 Ω impedance, RG1.13, 150 mm.
ACC-CAB-IPEX-SMA-150 specifications
Model
ACC-CAB-IPEX-SMA-150
Type
RF Cable Assembly
Connector Interface
IPEX MHF1 to SMA-Female
Impedance
50 Ω
VSWR (typical)
≤ 1.3:1
Frequency Range
DC –
6 GHz
Max Power Handling
10 W
Cable Grade
RG1.13
Cable Length
150 mm
Dimensions (L × W × H)
150 × 1 × 1 mm
Material
RG1.13 / gold-plated brass
Engineered for rf interconnect, the ACC-CAB-IPEX-SMA-150 rf cable assembly delivers robust IPEX MHF1 to SMA-Female connectivity. The 50 ohm design minimizes mismatch loss and maintains signal integrity.
Specifications
Connector Interface
IPEX MHF1 to SMA-Female
Impedance
50 Ω
VSWR (typical)
1.3:1 or better
Frequency Range
DC – 6 GHz
Max Power
10 W
Cable Grade
RG1.13
Cable Length
150 mm
Material
RG1.13 / gold-plated brass
Dimensions (L × W × H)
150 × 1 × 1 mm
Cable Construction
This assembly uses RG1.13 coaxial cable. The high-density braided shield provides excellent RF isolation, and the pure-copper center conductor ensures low resistive loss over the full cable run. Custom lengths and alternative cable grades are available on request.
Typical Applications
RF Interconnect
Board-Level Integration
Request a Quote
Need a custom length, different connector combination, or bulk quantity pricing for ACC-CAB-IPEX-SMA-150? Contact us via the inquiry form below.
Advanced filters (dimension limits)
Frequently Asked Questions
What is a rf cable assembly used for?
Coaxial RF cable assemblies with various connector combinations (SMA, N, IPEX, BNC, TNC, MMCX) in standard or custom lengths.
Is ACC-CAB-IPEX-SMA-150 suitable for rf interconnect?
Yes. ACC-CAB-IPEX-SMA-150 is well matched to rf interconnect deployments, where its radiation pattern and gain provide reliable coverage and link margin.
Can the connector on ACC-CAB-IPEX-SMA-150 be changed?
Yes. The default RF interface can be supplied as SMA, N-type, TNC, or other connectors on request, and custom cable assemblies are available. Specify your interface in the inquiry form.
What is the standard impedance and VSWR of ACC-CAB-IPEX-SMA-150?
The nominal impedance is 50 ohms with a typical VSWR of 1.5:1 or better across the operating band. A 75 ohm option can be quoted for broadcast applications.
How do I request a quote for ACC-CAB-IPEX-SMA-150?
Use the antenna configurator on this page to confirm the specification, then submit the inquiry form. An engineer from astronwireless.com will respond within one business day.
