| Model | LPDS-225-400 |
| Frequency (manufacturer model field) | 225-400MHz |
| Bandwidth (manufacturer model field) | 225-400MHz |
| Gain (manufacturer model field) | 14 dBi |
| Frequency Range | 225-400 MHz |
| Gain | 13 dBi |
| Bandwidth | 225-400 MHz |
| Antenna Type | LPDA |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 60 Degrees (if stacked vertically) |
| Front to Back Ratio | 18 dB. |
| VSWR - Equal To or Better Then | 2:1 |
| RF Power Handling Capacity | 800 Watts |
| Input Termination | N-Female or DIN-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 200 Km/Hr. |
| Overall Length | 1100 mm |
| Shipping Length | 1200 mm |
| Support Boom -Material - O.D. | Aluminum-Square Tube25.4mm (1 Inch) |
| Elements - Materials- Cross Section - Outer Diameter | Aluminum-Round Tube12.7mm (1/2 Inch) |
| Maximum Mount Pipe Diameter | 52 mm (2 Inches) |
| Gross Weight | 12 Kgs. |
| Operating Temperature | (-) 30 to +70 Degrees Celsius |
| Storage Temperature | (-) 40 to +80 Degrees Celcius |
| Humidity | 0 to 95% RH |
| Strategic Dual-Stacked Gain | Delivers a continuous typical gain of 13 dBi across the entire bandwidth, providing a significant link-margin boost for deep-range aircraft communication. |
| Frequency-Independent Performance | As a true log periodic system, it maintains stable electrical characteristics from 225 MHz to 400 MHz without lossy loading techniques. |
| Focused Radiation Control | The system allows for precise beam-shaping through stacking:Vertical Polarized Horizontal Stacking (VPHS): Narrows the horizontal beam to 30° while maintaining a wide vertical reach.Horizontal Polarized Vertical Stacking (HPVS): Narrows the vertical beam to 30° to concentrate power toward the horizon. |
| Vertical Polarized Horizontal Stacking (VPHS) | Narrows the horizontal beam to 30° while maintaining a wide vertical reach. |
| Horizontal Polarized Vertical Stacking (HPVS) | Narrows the vertical beam to 30° to concentrate power toward the horizon. |
| High-Power Capacity | Engineered to handle 800 Watts of RF power, supporting high-intensity transmitters and jamming exciters. |
| Low VSWR Architecture | Maintains a VSWR of better than 2:1 over the entire 175 MHz band, protecting high-value radio power amplifiers. |
| D.C. Grounded Safety | Features a direct-ground design to bleed off static noise and provide a low-resistance path for lightning protection. |
| Dual Array Composition | Consists of two identical LPDAs, a 2-way power combiner/splitter, and a specialized phasing harness. |
| Premium Alloy Construction | Fabricated from 6063T6 architectural-grade anodized aluminum, ensuring high strength with a manageable total system weight of 12 Kgs. |
| Reinforced Dual-Boom Design | Support booms use 25.4mm square tubing with extra spacers to eliminate element drooping and mechanical fatigue. |
| Tactical Portability | Elements are segmented and removable; the longest element is only 0.33m, allowing the entire system to be transported in cases under 4 feet. |
| Elite Hardware | Every screw and bolt is made of Type 316 Marine Grade Stainless Steel. |
| Wind Resilience | Aerodynamically optimized to survive extreme wind loads of up to 200 Km/Hr (125 mph). |
| MIL-STD-810G Compliance | Fully ruggedized for the world's most severe operational environments. |
| Extreme Thermal Range | Operational from -30°C to +70°C and storage rated up to +80°C. |
| Anti-Corrosive Shielding | Protected by an olive green epoxy powder coating that resists salt fog (Method 509.5), acid rain, and UV radiation. |
| Global Theaters | Tested for Fungus Resistance (Method 508.6) and humidity, making it suitable for tropical jungle deployment. |
| Maximum Link Margin | The 13 dBi gain effectively doubles the ERP (Effective Radiated Power) compared to single-unit models, extending the operational range for ATC hubs. |
| Configurable Beam-width | Operators can choose between VPHS or HPVS stacking to customize the "signal footprint" to match specific terrain or sectoral monitoring needs. |
| Consolidated Logistics | Replaces multiple narrow-band directional antennas, reducing tower clutter and spare-part inventories. |
| Increased Oceanic Reach | Essential for ATC centers managing deep oceanic corridors where standard signal strength is insufficient. |
| Rapid Deployment | Despite the dual-array complexity, each antenna can be assembled in under 5 minutes, facilitating quick setup for mobile command units. |
| Interference Rejection | The system's high directivity and 18 dB Front-to-Back ratio ensure high-quality links even in congested electromagnetic environments. |
| Strategic Military ATC | Providing long-distance ground-to-air links at major military airfields and coastal hubs. |
| Tactical Jamming & EW | Concentrating directional energy to disrupt enemy aeronautical communication and navigation links. |
| Long-Range UHF Monitoring | High-gain directional capture for SIGINT and ELINT missions across the aviation spectrum. |
| Remote Ground-to-Air Relay | Establishing a high-power wireless "bridge" to airborne assets in difficult-to-reach terrain. |
| Frequency stated in title | 225-400 MHz |
| Gain stated in title | 13 dBi |
| Category | Horn, Dish, Grid & Log Periodic |