| Model | LP-170-860 |
| Frequency (manufacturer model field) | 170-860MHz |
| Bandwidth (manufacturer model field) | 170-860MHz |
| Gain (manufacturer model field) | 9 dBi |
| Frequency Range | 170-860 MHz |
| Gain | 9 dBi |
| Bandwidth | 170-860MHz |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 60 Degrees |
| Front to Back Ratio | 18 dB. |
| VSWR - Equal To or Better Then | 1:2.5 |
| RF Power Handling Capacity | 500 Watts |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 200 Km//Hr. |
| Overall Length | 1.50 Meters |
| Shipping Length | 1.55 Meters |
| Support Boom -Material - O.D. | AluminumSquare Tube |
| Elements - Materials- Cross Section - Outer Diameter | AluminumRound Tube |
| Maximum Mount Pipe Diameter | 52mm (2 Inches) |
| Gross Weight | 5 Kgs. |
| Operating Temperature | (-)30 to + 70 Degrees Celsius |
| Storage Temperature | (-)40 to + 80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Elite 9 dBi Gain | By utilizing full-sized, non-loaded radiating elements, the antenna achieves exceptional gain and a focused 70-degree horizontal beamwidth. This allows for extreme precision in signal targeting and significantly increased range compared to standard broadband antennas. |
| Rapid Single-Technician Assembly | Featuring foldable/removable elements and a stainless steel stud system, the antenna can be fully assembled by one person in less than 5 minutes. |
| Rear-End Mounting Mastery | Supplied with a rear-end mounting bracket as standard, ensuring the support mast does not interfere with the antenna's radiation pattern. A "Center of Gravity" mounting option is available for specialized weight-balanced deployments. |
| MIL-STD-810G Certified | Rigorously tested for extreme temperature, shock, vibration, rain, and salt fog. It is specifically engineered to thrive in coastal, monsoon, or desert environments. |
| Marine-Grade Durability | All hardware is made of Type 316 marine-grade stainless steel. The entire array is protected by an epoxy-based Olive Green powder coating for total corrosion resistance and tactical low visibility. |
| Integrated Safety | Operates at D.C. ground, providing a low-resistance discharge path for lightning and suppressing atmospheric static to ensure an ultra-quiet noise floor for sensitive surveillance. |
| Precision 170–860 MHz Coverage | Replaces multiple antennas for High-VHF and UHF applications. |
| High-Efficiency 9 dBi Gain | Focused directional precision for long-range intercepts. |
| Polarization Agility | Permits quick changes between Vertical and Horizontal orientation. |
| Mechanical Resilience | Extra spacers between support booms and square-tube architecture for high-wind stability (200 Km/Hr). |
| Cross Polarization Discrimination | Superior 22 dB discrimination ensures high signal isolation and clarity. |
| Published detail | In the signal-dense 170-860 MHz band, isolating specific tactical links requires a surgical directional focus. |
| The Precision Advantage | The focused 70-degree beamwidth acts as a directional "spotlight." This allows an operator to isolate a specific target while physically "nulling out" interference from the sides and rear. |
| Published detail | Signals in the 170–860 MHz range are small enough to be blocked by buildings and hills but large enough to "creep" around edges. |
| The Precision Advantage | The focused 70-degree horizontal beamwidth of the LP-170-860 acts as an RF "spotlight." This allows an operator to isolate a specific tactical repeater or an aircraft's transmission while physically "nulling out" interference from nearby urban noise. |
| Range Extension | Every 6 dB of gain effectively doubles your reception range. The 9 dBi gain allows you to pull in weak signals from distances where standard omnidirectional antennas would only see static. |
| The "Null" Problem | Most tactical handhelds are vertically polarized. If a signal reflects off a slanted roof, it may arrive at your site with a significant horizontal shift. A standard vertical antenna would experience a signal dropout of up to 20 dB. |
| The Tactical Solution | The LP-170-860 features a flexible mounting arrangement that allows operators to switch between Horizontal and Vertical polarization in seconds. This ensures you can match the orientation of the incoming reflected wave to maintain a stable, high-fidelity intercept. |
| Published detail | To successfully disrupt a target link (e.g., a 400 MHz emergency services net or an 800 MHz data link), you must achieve a superior Jamming-to-Signal (J/S) ratio at the victim’s receiver. |
| Published detail | 250W Continuous Power: The LP-170-860 acts as a powerful directional "floodlight." Its 9 dBi gain acts as an RF magnifying glass, concentrating 250 Watts of energy into a focused cone. |
| ERP Advantage | This concentration exponentially increases your Effective Radiated Power (ERP). You can successfully "drown out" a legitimate signal from several kilometers away, even when the adversary is using high-power mobile transmitters. |
| The Solution | The LP-170-860 is D.C. Grounded. It constantly bleeds off this static charge to the mast and earth. This ensures the lowest possible noise floor, allowing you to detect low-power "hidden" transmissions or frequency-hopping signals that would be buried in the static of an ungrounded system. |
| Rear-End Mounting Advantage | By mounting at the rear of the boom, you can use a standard metal mast without worrying about it distorting your signal. Ensure the mast is at least 51mm (2 inches) in diameter for stability. |
| Cable Integrity | In the 800 MHz range, cable loss becomes significant. Avoid standard RG-58. Use LMR-400 or LMR-600. Every 3 dB of cable loss effectively cuts your jamming power or reception sensitivity in half. |
| Rapid 5-Minute Setup | Take full advantage of the foldable/removable elements. In modern EW, speed is survival. The LP-170-860's speed of assembly (under 5 minutes) is a key survivability feature for "jump" missions. |
| Boresight Alignment | Because the beamwidth is 70 degrees, a 35-degree error in alignment will drop your gain significantly. Use a compass to ensure the antenna is pointed exactly at the target sector for maximum intercept probability. |
| Frequency stated in title | 170-860 MHz |
| Gain stated in title | 9 dBi |
| Category | Horn, Dish, Grid & Log Periodic |