Skip to content
LPDP-30-100 Dual Polarized LPDA \| 30-100 MHz 8 dBi Tactical Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

LPDP-30-100 Dual Polarized LPDA \| 30-100 MHz 8 dBi Tactical Antenna

Updated 2026-11-19 · Markdown version

Model no. LPDP-30-100

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelLPDP-30-100
Frequency (manufacturer model field)30-100MHz
Bandwidth (manufacturer model field)30-100MHz
Gain (manufacturer model field)5 to 8 dBi.
Frequency Range30 - 100 MHz.
Gain5 to 8 dBi.
BandwidthEntire Band
PolarizationVertical & Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points90 +/-10 Degrees Typical
Front to Back Ratio15 +/-2 dB. Typical
VSWR - Equal To or Better ThenBetter Than 2.5:1
RF Power Handling Capacity500 Watts
Input Termination2 x N-Female
Lightning ProtectionDC Ground
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating180 Km/Hr.
Overall Length4.7 Meters
Shipping Length2.65 Meters
Support Boom -Material - O.D.AluminumSquare Tube
Elements - Materials- Cross Section - Outer DiameterAluminumRound Tube
Insulator MaterialTeflon & Nylon
Maximum Mount Pipe Diameter50-102 mm (2-4 Inches)
Gross Weight45 Kgs.
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH
True Polarization DiversityEquipped with 2 x N-Female input ports, the antenna eliminates "polarization fading" by concurrently processing vertical and horizontal signal components. This is vital for intercepting tactical radios in dense foliage or signals reflecting off complex terrain.
Unloaded EfficiencyTo maintain peak radiation efficiency, the LPDP-30-100 uses full-sized radiating elements (up to 2.5 meters). This avoids the heat and power loss common in size-reducing loading techniques, ensuring a consistent 5 to 8 dBi gain across the entire 30-100 MHz band.
Balanced Center MountingGiven its 45 kg weight and 5-meter wingspan, the antenna features a center-of-gravity mounting arrangement for secure installation on heavy-duty masts up to 102mm (4 inches).
Foldable Tactical ElementsDespite its 4.7-meter length, the antenna is designed for manageable logistics. Elements are supplied in two segments and utilize a stainless-steel stud system for rapid assembly. The shipping length is a compact 2.65 meters.
Integrated ProtectionThe entire array operates at D.C. ground, providing a low-resistance path for lightning protection and suppressing atmospheric static for a high-sensitivity "quiet" noise floor.
Marine-Grade DurabilityAll fasteners, screws, and bolts are made of high-quality stainless steel. The support booms are reinforced with extra spacers to withstand wind speeds up to 180 Km/Hr.
Dual-Polarized Cross-Element GeometrySimultaneous capture of E & H polarized signals for zero-loss intercepts.
Massive 30–100 MHz BandwidthCovers Tactical VHF (30–88 MHz) and FM/Public safety bands in one unit.
High-Power 500W RatingEngineered for high-duty cycle electronic countermeasures (ECM).
Strategic 4.7-Meter DesignOptimized for low-frequency efficiency without lossy electrical loading.
Direct D.C. GroundingSuperior lightning protection and suppressed noise for SIGINT applications.
Foldable/Removable ElementsSegmented design for streamlined logistics and rapid field setup.
Marine Grade Stainless HardwareResists coastal, industrial, and tropical corrosion.
High Wind RatingBuilt to withstand 180 Km/Hr gusts in permanent base installations.
Balanced Center MountingSecurely fits 50mm to 102mm (2-4 inch) heavy-duty mounting pipes.
The SolutionBy monitoring both ports simultaneously, the LPDP-30-100 captures the signal on the horizontal plane even when it disappears on the vertical, maintaining a stable link or intercept.
Published detailTo successfully jam frequency-hopping targets in the 30–100 MHz band, you must saturate the victim's receiver regardless of their antenna orientation.
The "Null" ProblemMost tactical manpacks use vertical whip antennas. If that signal reflects off a building or passes through a dense forest canopy, its polarization can rotate by 90 degrees. A standard vertical monitoring antenna would experience a 20–25 dB signal drop, effectively losing the target.
The Diversity SolutionBy monitoring both the Vertical and Horizontal ports of the LPDP-30-100, your SIGINT system can perform Maximum Ratio Combining (MRC). If the signal fades on the vertical plane, it "peaks" on the horizontal, ensuring a 100% intercept rate for critical voice and data bursts.
Published detailTo disrupt a wideband frequency-hopping network in the 30–100 MHz range, you must saturate the victim's "RF environment" completely.
Dual-Plane SaturationMany modern high-end tactical radios use multiple antenna ports or diversity schemes to "dodge" jammers. By feeding 500 Watts into both ports of the LPDP-30-100, you saturate both the E (Electric) and H (Magnetic) planes. This leaves the target radio with no "clean" orientation to receive its intended signal.
Directional Power DensityThe 8 dBi gain concentrates your 500W into a 90-degree floodlight. This dramatically increases the Jamming-to-Signal (J/S) ratio compared to an omnidirectional antenna, allowing you to suppress targets at significantly greater distances.
Vertical DominanceConfirms mobile tactical units, maritime vessels, or standard ground-based infantry whips.
Horizontal DominanceIndicates fixed-site point-to-point relays, TV/Broadcast backup links, or specialized NVIS (Near Vertical Incidence Skywave) VHF links used for regional communication over mountainous terrain.
Rapid Polarization ShiftingA signal that rapidly moves between V and H ports often identifies a moving vehicle or low-flying aircraft as the signal bounces off changing terrain features.
The 15 dB ShieldThe LPDP-30-100 radiates 15 dB less energy out of the back than the front. This allows your EW team to operate their own Command & Control (C2) equipment directly behind the antenna without being "blinded" by their own high-power jamming signal.
Feeder ManagementUse high-quality, phase-matched LMR-600 or 1/2" corrugated cables. While cable loss is lower at VHF than at UHF, 500W of power generates significant heat. Ensure all connectors are torqued and weather-sealed.
Mast StabilityDue to the 5-meter width and 45 kg weight, use a heavy-duty 102mm (4-inch) steel or reinforced aluminum mast. Ensure the center-mount clamp is positioned correctly to balance the 4.7-meter boom.
Grounding for Noise FloorEnsure the mast is grounded to a copper rod. The D.C. Grounded design of the LPDP-30-100 is vital for bleeding off the atmospheric static that can drown out weak SIGINT signals during storms or high-wind events.
Visual SignatureGiven its 5-meter wingspan, the LPDP-30-100 is visually prominent. Utilize the Olive Green finish and consider supplemental camouflage netting if the antenna is deployed in a tactical forward position to break up the recognizable "log-periodic" silhouette.
Frequency stated in title30-100 MHz
Gain stated in title8 dBi
CategoryHorn, Dish, Grid & Log Periodic

Description

LPDP-30-100 Dual Polarized LPDA \| 30-100 MHz 8 dBi Tactical Antenna is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Frequency Range: 30 – 100 MHz.
  • Gain: 5 to 8 dBi.
  • Polarization: Vertical & Horizontal
  • Model: LPDP-30-100
  • Frequency (manufacturer model field): 30-100MHz
  • Bandwidth (manufacturer model field): 30-100MHz
  • Gain (manufacturer model field): 5 to 8 dBi.
  • Bandwidth: Entire Band

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for LPDP-30-100 Dual Polarized LPDA \| 30-100 MHz 8 dBi Tactical Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of LPDP-30-100 Dual Polarized LPDA \| 30-100 MHz 8 dBi Tactical Antenna?

Frequency Range: 30 - 100 MHz.; Gain: 5 to 8 dBi.; Polarization: Vertical & Horizontal; Model: LPDP-30-100; Frequency (manufacturer model field): 30-100MHz; Bandwidth (manufacturer model field): 30-100MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote