| Model | LPDP-20-3000L |
| Frequency (manufacturer model field) | 20-3000MHz |
| Bandwidth (manufacturer model field) | 20-3000 MHz |
| Gain (manufacturer model field) | 6 dBi. |
| Frequency Range | 20 - 3000 MHz |
| Gain | 6 dBi. |
| Bandwidth | 20-3000 MHz |
| Polarization | Dual - Vertical & Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 110 Degrees Typical |
| Vertical Beamwidth -Half Power Points | 60 Degrees Typical |
| Front to Back Ratio | 14+/-2 dB. |
| VSWR - Equal To or Better Then | 3:1 |
| RF Power Handling Capacity | 1000 Watts @1GHz; 250W@3GHz |
| Input Termination | 2 x DIN Female or N-Female |
| Lightning Protection | Direct Ground |
| Mounting Pipe | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 170 Km/Hr. |
| Overall Length | 3 Meters |
| Shipping Length | 1.8 Meters (6 feet) |
| Support Boom -Material - O.D. | AluminumSquare Tube |
| Elements - Materials- Cross Section - Outer Diameter | AluminumRound Tube |
| Mounting Clamps Position | At the center of support boom |
| Maximum Mount Pipe Diameter | 50-77mm (2-3 Inches) |
| Gross Weight | 44 Kgs. |
| Operating Temperature | (-)30 to + 70 Degrees Celsius |
| Storage Temperature | (-)40 to + 80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Size-Reduced Loading | Advanced internal loading allows this 3-meter array to maintain high efficiency at 20 MHz while continuing to perform seamlessly up to 3000 MHz. This eliminates the need for antenna swaps during mission-critical frequency shifts. |
| True Polarization Diversity | With 2 x N-Female ports, the antenna captures E & H polarized signals simultaneously. This is essential for defeating "polarization rotation" caused by signals bouncing off urban structures or rotating through the ionosphere. |
| Maintenance-Free Passive Design | The antenna is fully passive, containing no active tuning circuits. This ensures a high MTBF (Mean Time Between Failure) and a completely linear response across the entire 2.98 GHz bandwidth. |
| MIL-STD-810G Survival | The structure is finished in Olive Green RAL 6003 epoxy powder coating. All hardware is made from Type 316 marine-grade stainless steel, ensuring zero corrosion during salt fog, rain, or high-humidity operations. |
| D.C. Grounded Safety | Provides a low-resistance path for lightning protection and suppresses atmospheric static, resulting in an ultra-quiet noise floor for sensitive surveillance receivers. |
| Ultra-Wideband 20–3000 MHz Coverage | Replaces multiple antennas with a single tactical unit. |
| Dual-Polarized Cross Architecture | Simultaneous vertical and horizontal signal processing. |
| High-Power Handling | Rated for 300W @ 1GHz and 150W @ 3GHz for continuous-duty jamming. |
| Compact 3-Meter Footprint | Loaded elements provide HF/VHF capability in a UHF-sized frame. |
| Rapid Tactical Deployment | Self-locking, foldable design for <10 minute setup times. |
| Strategic Center-Mount Design | Optimized for stability and balanced load on tactical masts. |
| Marine Grade 316 Stainless | Total corrosion resistance for the most severe environments. |
| Direct Ground Protection | Integrated lightning protection and enhanced noise immunity. |
| Published detail | Because the LPDP-20-3000L is a center-mount antenna, the presence of a metallic mast directly through the center of the elements would degrade the radiation pattern and VSWR. |
| Recommendation | Use a heavy-duty fiberglass mast (at least 6 feet/1.8 meters) to elevate the antenna above the metallic portion of the tower. This ensures the 110-degree beamwidth remains undistorted across all bands. |
| Published detail | In the 20-3000 MHz range, signals behave differently. Lower frequencies wrap around buildings, while higher frequencies (S-Band) reflect like light. |
| The Solution | By monitoring both ports, the LPDP-20-3000L ensures that no matter how the signal rotates, it is captured by either the vertical or horizontal elements, preventing "signal dropouts." |
| The "Null" Problem | A standard vertical monitoring antenna will experience a signal "null" or dropout of up to 20–30 dB if a target's signal rotates horizontally after hitting a building or traveling through the ionosphere. |
| The Tactical Solution | By utilizing both the Vertical and Horizontal ports of the LPDP-20-3000L, your receiver captures both components of the wave simultaneously. This ensures you never lose a critical voice transmission or high-speed data burst, regardless of how the signal has bounced. |
| Detection vs. Reception | It identifies the presence of tactical low-band nets (like SINCGARS) and high-band data links (S-Band) simultaneously. |
| Maintenance-Free Passive Design | Unlike active antennas that can saturate or fail in high-RF environments, the LPDP-20-3000L is fully passive. It can monitor weak signals while nearby high-power transmitters are active without "blinding" the internal circuitry. |
| Vertical Dominance | Confirms standard mobile tactical units, handheld "walkie-talkies," or maritime VHF. |
| Horizontal/Mixed Dominance | Often identifies fixed-site point-to-point relays, TV/broadcast backup links, or signals arriving via Ionospheric Refraction (Skip). |
| Published detail | Despite its compact size, the antenna handles 300 Watts @ 1GHz. |
| Operator Safety | The 14 dB Front-to-Back ratio is critical. It ensures the majority of the energy is projected toward the target, protecting the SIGINT team and their sensitive receivers located behind the antenna mast. |
| Non-Metallic Mast (Critical) | Since this is a center-mount antenna, you must use at least 6 feet (1.8m) of heavy-duty fiberglass mast. A metal mast passing through the elements will cause massive VSWR spikes and destroy the radiation pattern. |
| Phase-Matched Feeders | Use identical lengths of LMR-600 for both ports. Even a small difference in cable length at 3 GHz causes phase shifts that degrade your ability to combine the V and H signals. |
| Grounding & Noise Floor | Connect the direct ground terminal to a copper ground stake. This bleeds off "P-static" (precipitation static) that builds up during wind or rain, which can otherwise drown out weak signals at the 2–3 GHz range. |
| Connector Sealing | At 3 GHz, moisture is the enemy. Use professional-grade butyl rubber tape and UV-rated electrical tape to seal the N-Female connectors. A single drop of water will ruin the VSWR. |
| Frequency stated in title | 20-3000 MHz |
| Gain stated in title | 6 dBi |
| Category | Horn, Dish, Grid & Log Periodic |