Skip to content
HF-LP-10-30 Tactical HF LPDA \| 10-30 MHz 7 dBi Log Periodic Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

HF-LP-10-30 Tactical HF LPDA \| 10-30 MHz 7 dBi Log Periodic Antenna

Updated 2026-11-19 · Markdown version

Model no. HF-LP-10-30

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelHF-LP-10-30
Frequency (manufacturer model field)10-30MHz
Bandwidth (manufacturer model field)10-30MHz
Gain (manufacturer model field)7 dBi
Frequency Range10-30 MHz
Gain7 dBi
BandwidthEntire Band
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points145 +/- 20 Degrees
Front to Back Ratio12 +/- 2 dB.
VSWR - Equal To or Better Then1:3.0
RF Power Handling Capacity1000 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground
Antenna Materials6063T6 Aluminum
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating160 Km/Hr.
Overall Length10 Meters
Shipping Length3.3 Meters
Support Boom -Material - O.D.AluminumSquare Tube
Elements - Materials- Cross Section - Outer DiameterAluminumRound Tube
Maximum Mount Pipe Diameter76-115mm (3-4.5 Inches)
Gross Weight110 Kgs.
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH
Published detailThe HF-LP-10-30 is engineered for operators who require "total spectrum visibility" at the lower end of the radio spectrum (10-30 MHz) where signals travel over the horizon.
Non-Loaded EfficiencyUnlike smaller antennas that use lossy electrical loading to reduce size, the HF-LP-10-30 uses full-sized radiating elements across its 15-meter width. This ensures maximum radiation efficiency and a stable 7 dBi gain across 90% of the band.
Rapid Strategic DeploymentDespite its massive physical footprint (10m x 15m), the antenna features foldable elements and a segmented boom. Two technicians can fully assemble the array in less than 15 minutes using simple hand tools, making it ideal for mobile command posts.
Logistical IntelligenceThe 10-meter boom and radiating elements are supplied in segments (the longest being 3.3 meters), ensuring the entire system can be transported via standard tactical vehicles.
Marine-Grade DurabilityAll fasteners (screws, nuts, and bolts) are made of Type 316 marine-grade stainless steel. The entire unit is finished with a protective Olive Green epoxy powder coating for total corrosion resistance in coastal or high-humidity environments.
Integrated SafetyOperates at D.C. ground, providing a low-resistance discharge path for lightning and suppressing atmospheric static for an ultra-quiet noise floor during sensitive SIGINT operations.
Mechanical ResilienceExtra spacers between support booms and a square-tube aluminum boom design ensure the antenna maintains structural integrity in wind loads up to 160 km/Hr.
Comprehensive 10–30 MHz CoverageOne antenna for global HF skywave and tactical ground-wave.
High-Efficiency 7 dBi GainFocused directional precision for long-range intercepts.
Fast 15-Minute AssemblyModular, segmented components for streamlined tactical logistics.
Center-Boom MountingSecurely fits 76mm to 115mm (3-4.5 inch) heavy-duty masts.
Polarization AgilityPermits both Vertical and Horizontal orientation.
Direct Ground ProtectionIntegrated lightning protection and enhanced noise immunity.
Published detailAt 10–30 MHz, radio waves reflect off the ionosphere, allowing for communication thousands of kilometers away.
Strategic ReachThe HF-LP-10-30's directional gain allows you to "target" specific geographic regions for long-range monitoring or jamming that standard vertical whips cannot reach.
Published detailIn the 10–30 MHz band, signals do not just travel in a straight line; they "bounce" off the upper atmosphere.
The Strategic AdvantageThe HF-LP-10-30 allows you to target specific geographic regions far beyond the physical horizon. By adjusting the antenna's heading, you can "look" into distant theaters of operation to monitor high-frequency diplomatic, maritime, and military command nets.
NVIS CapabilitiesAt the lower end of the band (10 MHz), this antenna can be used for Near Vertical Incidence Skywave (NVIS) operations, providing reliable communication and monitoring in "skip zones" where ground waves fail due to mountainous terrain.
Published detail1000W Continuous Power: The HF-LP-10-30 acts as a massive directional "floodlight." Its 7 dBi gain acts as an RF magnifying glass, concentrating 1 Kilowatt of energy into a wide 145-degree horizontal beam.
Wide-Sector SuppressionThe broad horizontal beamwidth is a tactical advantage in HF jamming; it allows you to suppress multiple enemy stations across a wide geographic arc simultaneously, rather than focusing on a single point.
Directional TriangulationBy rotating the 15-meter wide array, teams can identify the specific bearing of an incoming transmission. When used with a second HF-LP site, you can achieve highly accurate long-range triangulation of mobile assets.
The SolutionThe HF-LP-10-30’s mounting arrangement permits both Vertical and Horizontal polarization. If a distant signal is fading due to polarization shifts, switching the antenna's orientation can instantly restore the link or intercept quality, providing a 12 dB Front-to-Back ratio to isolate the target from local interference.
Rapid 15-Minute SetupUtilize the foldable elements and segmented boom. In strategic EW, the ability to pack up and move (Shoot-and-Scoot) is vital to avoid detection by enemy direction-finding units.
Heavy-Duty Mast RequirementsAt 110 Kgs and 15 meters wide, this antenna exerts massive mechanical stress. Ensure your mast (3 to 4.5 inches) is properly guyed and rated for a 160 km/Hr wind load.
High-Power FeedersWhen running at 1000W in the HF band, use high-quality N-Female terminations and low-loss coaxial cable to prevent heat buildup and dielectric breakdown.
Grounding for SafetyGiven the massive size of the elements, ensure the Direct Ground lightning protection is bonded to a dedicated earth stake to protect both personnel and sensitive receiver equipment from atmospheric discharge.
Frequency stated in title10-30 MHz
Gain stated in title7 dBi
CategoryHorn, Dish, Grid & Log Periodic

Description

HF-LP-10-30 Tactical HF LPDA \| 10-30 MHz 7 dBi Log Periodic Antenna is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Frequency Range: 10-30 MHz
  • Gain: 7 dBi
  • Polarization: Vertical or Horizontal
  • Model: HF-LP-10-30
  • Frequency (manufacturer model field): 10-30MHz
  • Bandwidth (manufacturer model field): 10-30MHz
  • Gain (manufacturer model field): 7 dBi
  • Bandwidth: Entire Band

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for HF-LP-10-30 Tactical HF LPDA \| 10-30 MHz 7 dBi Log Periodic Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of HF-LP-10-30 Tactical HF LPDA \| 10-30 MHz 7 dBi Log Periodic Antenna?

Frequency Range: 10-30 MHz; Gain: 7 dBi; Polarization: Vertical or Horizontal; Model: HF-LP-10-30; Frequency (manufacturer model field): 10-30MHz; Bandwidth (manufacturer model field): 10-30MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote