| Model | LPDP-20-500L |
| Frequency (manufacturer model field) | 20-500MHz |
| Bandwidth (manufacturer model field) | 20-500MHz |
| Gain (manufacturer model field) | 6 dBi |
| Frequency Range | 20 - 500 MHz |
| Gain | 6 dBi |
| Bandwidth | 20-500 MHz |
| Polarization | Dual - Vertical and Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Horizontal Beamwidth -Half Power Points | 110 Degrees Typical |
| Front to Back Ratio | 14 +/-2 dB. |
| VSWR - Equal To or Better Then | 3:1 |
| RF Power Handling Capacity | 1500 Watts |
| Input Termination | 2 x DIN Female or N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 180 Km/Hr. |
| Overall Length | 3 Meters |
| Shipping Length | 1.8 Meters (6 feet) |
| Support Boom -Material - O.D. | AluminumSquare Tube |
| Elements - Materials- Cross Section - Outer Diameter | AluminumRound Tube |
| Insulator Material | Nylon & Teflon |
| Mounting Clamps Position | At the center of the support boom |
| Maximum Mount Pipe Diameter | 50-76mm (2-3 Inches) |
| Gross Weight | 46 Kgs. |
| Operating Temperature | (-)30 to + 70 Degrees Celsius |
| Storage Temperature | (-)40 to + 80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Size-Reduced Loading | Advanced internal loading allows this antenna to operate down to 20 MHz while maintaining a length of only 3 meters. This compact profile is ideal for roof-mounting on tactical vehicles or quick-setup tripod systems. |
| True Polarization Control | With 2 x N-Female (or optional DIN-Female) terminations, the antenna provides simultaneous vertical and horizontal feeds. This eliminates signal loss due to polarization rotation—a common issue when tracking mobile targets in urban or forested terrain. |
| Extreme Power Handling | While standard at 500 Watts, this model can be customized for 1.5KW continuous duty, making it an exceptionally powerful tool for wideband electronic countermeasures (ECM). |
| Military-Grade Durability | The entire structure is finished in an Olive Green epoxy powder coating. All fasteners and mounting hardware are made from Type 316 marine-grade stainless steel, ensuring zero corrosion in salt-fog or high-humidity environments. |
| D.C. Grounded Safety | Operates at direct ground to provide a low-resistance path for lightning and to bleed off atmospheric static, ensuring the lowest possible noise floor for sensitive monitoring equipment. |
| Cross-Element Architecture | Simultaneous vertical and horizontal signal processing. |
| Compact 3-Meter Footprint | Loaded elements reduce size by half compared to standard 20-500 MHz arrays. |
| Elite 20–500 MHz Bandwidth | Covers HF, VHF, and lower UHF in a single directional unit. |
| Fast Deployment Self-Locking | Foldable/segmented design for rapid tactical response. |
| MIL-SPEC Environmental Rating | Operates from -30°C to +70°C; handles 180 Km/Hr winds. |
| Marine Grade 316 Stainless | Total corrosion resistance for the most severe environments. |
| Balanced Center Mounting | Securely fits 50mm to 77mm (2-3 inch) heavy-duty masts. |
| The Solution | By monitoring both ports simultaneously, the LPDP-20-500L ensures that if a signal fades on the vertical plane, it is captured on the horizontal, preventing "dropouts" during critical surveillance. |
| Published detail | In cities, low-frequency signals (20–100 MHz) wrap around buildings, while higher-frequency signals (300–500 MHz) reflect off them like light off a mirror. These interactions cause Polarization Rotation. |
| The Problem | A standard vertical monitoring antenna will experience a signal "null" or dropout of up to 20 dB if a target's signal rotates horizontally after hitting a building. |
| The Tactical Solution | By utilizing both the Vertical and Horizontal ports of the LPDP-20-500L, your receiver captures both components of the wave. If the signal fades on the vertical plane, it "peaks" on the horizontal, ensuring you never lose a critical voice transmission or data burst. |
| Published detail | Because the LPDP-20-500L uses loading to reduce its size, its gain at the lower end (20–100 MHz) is lower than a full-sized 6-meter array. |
| Detection vs. Reception | Even with lower gain, the antenna is highly sensitive for Signal Detection. It acts as a "tripwire," identifying the presence of tactical low-band nets (like SINCGARS) before they move into higher-gain frequency ranges. |
| Compact Manoeuvrability | The 3-meter length allows a vehicle to stay mobile while monitoring—something nearly impossible with a standard 6-meter HF/VHF log periodic. |
| Vertical Dominance | Confirms standard mobile tactical units, handheld "walkie-talkies," or maritime VHF. |
| Horizontal/Mixed Dominance | Often identifies fixed-site point-to-point relays, TV/broadcast backup links, or signals arriving via Ionospheric Refraction (Skip), which naturally rotates polarization over long distances. |
| Published detail | Despite its small size, the antenna handles 500 Watts (with a 1.5KW option). |
| Operator Safety | The 14 dB Front-to-Back ratio is critical when transmitting at high power. It ensures the majority of the energy is projected toward the target, protecting the SIGINT team and their sensitive receivers located behind the antenna mast. |
| Phase-Matched Feeders | Use identical lengths of LMR-400 (for 500W) or LMR-600 (for 1.5KW) for both ports. Even a small difference in cable length can cause phase shifts that degrade your ability to combine the V and H signals effectively. |
| Rapid Self-Locking Setup | Practice the 10-minute assembly. Ensure the self-locking devices are fully engaged; in high-vibration mobile environments (like a moving truck), element security is vital for maintaining a stable VSWR. |
| Grounding & Noise Floor | Connect the direct ground terminal to the vehicle chassis or a ground stake. This is essential to bleed off the "P-static" (precipitation static) that builds up during movement or rain, which can otherwise drown out weak signals in the 400–500 MHz range. |
| Mast Verticality | Ensure your mast is level. A 10-degree tilt can reduce your Cross-Polarization Discrimination from 25 dB down to 15 dB, making it harder to isolate specific signals in a crowded RF environment. |
| Frequency stated in title | 20-500 MHz |
| Category | Horn, Dish, Grid & Log Periodic |