| Model | AP-85028 |
| Frequency (manufacturer model field) | 700–990MHz |
| Bandwidth (manufacturer model field) | 80MHz |
| Gain (manufacturer model field) | 28 dBi. |
| Frequency Range | 700 - 990 MHz. |
| Gain | 28 dBi. |
| Bandwidth | 80 MHz. |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Directional |
| Beamwidth -3dB. | 6 Degrees |
| Front to Back Ratio | 38 dB. |
| VSWR - Equal To or Better Then | 1:1.5 |
| RF Power Handling Capacity | 250 Watts. |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 190 Km/Hr. |
| Support Pipe O.D. | 76 mm (3 Inches) |
| Support Pipe Material | 6063T6 Aluminum Alloy |
| Diameter of Parabolic Reflector | 4 Meters |
| Radiating Material | High Quality Brass |
| Grid Members Material | Aluninum Tube 16 mm (5/8 Inch) |
| Maximum Mount Pipe Diameter | 115 mm (4.5 Inches) |
| Gross Weight | 200 Kgs. |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Ultra-High Gain Performance | Delivers a typical mid-band gain of 28 dBi. The massive aperture size allows for "over-the-horizon" or extremely long-distance point-to-point terrestrial links where lower-gain antennas would fail to maintain a signal. |
| Precision Targeting | Features a razor-sharp 6-degree beam-width at half-power points. This highly focused beam ensures that RF energy is concentrated precisely on the target receiver, minimizing side-lobe interference and maximizing link security. |
| Advanced Signal Isolation | Front-to-Back Ratio: Better than 42 dB, ensuring the antenna effectively ignores noise and signals originating from behind the station.Cross-Polarized Discrimination: Better than 36 dB, critical for maintaining high-capacity digital links and reducing interference from adjacent channels. |
| Front-to-Back Ratio | Better than 42 dB, ensuring the antenna effectively ignores noise and signals originating from behind the station. |
| Cross-Polarized Discrimination | Better than 36 dB, critical for maintaining high-capacity digital links and reducing interference from adjacent channels. |
| High-Efficiency Feed System | The antenna dipole feed utilizes an Air-Cored transmission line with a primary feed horn. Radiating elements are manufactured from high-quality brass to ensure maximum conductivity and minimum insertion loss. |
| FCC Part 101.115 Compliance | This antenna is 100% compliant with FCC standards for directional antennas, ensuring it meets strict regulatory requirements for beam-width and cross-polarization discrimination. |
| Lightning Protection | Operates at direct D.C. ground with a low-resistance discharge path, shielding connected radio hardware from atmospheric static and lightning transients. |
| Reflector Engineering | The 4-meter (13.4 feet) diameter grid reflector is constructed from 6063T6 architectural-grade anodized aluminum alloy. The grid design utilizes 12 mm grid members to significantly reduce wind loading compared to solid dishes while maintaining parabolic precision. |
| Strategic Hardening | Marine-Grade Hardware: All screws, nuts, and bolts are made of Type 316 Stainless Steel to prevent galvanic corrosion.Anti-Corrosive Finish: The complete assembly is treated with an anti-corrosive powder coating in an Olive Green military finish. |
| Marine-Grade Hardware | All screws, nuts, and bolts are made of Type 316 Stainless Steel to prevent galvanic corrosion. |
| Anti-Corrosive Finish | The complete assembly is treated with an anti-corrosive powder coating in an Olive Green military finish. |
| Precision Alignment Tracking | Equipped with an elevation tracking mechanism allowing for fine adjustments of +/- 5 degrees. This is essential for optimizing signal strength over long-range links where even a fraction of a degree matters. |
| Structural Stability | Includes two side struts (support arms) to provide extra rigidity to the 200 Kg assembly, ensuring the dish remains stable and aligned during high-wind events. |
| Protected Feed | The dipole feed is completely sealed inside a high-impact ABS radome, protecting the sensitive internal brass components from moisture, dust, and ice. |
| Mounting Interface | Designed to secure onto large-diameter support pipes up to 110 mm (4.3 inches). |
| Wind Resilience | The grid architecture allows for a wind rating of 190 Km/Hr. The open grid structure lets air pass through, drastically reducing the "sail effect" and torque on the tower compared to solid parabolic dishes. |
| Extreme Thermal Window | Operational in temperature ranges from -30°C to +70°C and storage-rated from -40°C to +80°C. |
| High Humidity Tolerance | Certified for operation in 0 to 95% RH environments, making it suitable for tropical, coastal, and monsoon-prone zones. |
| Corrosive Resistance | Specifically engineered for coastal theaters; the combination of anodized aluminum, stainless steel hardware, and powder coating prevents oxidation from salt fog and acid rain. |
| Tactical Resilience | The high-strength 63 mm aluminum tube support rim and 12 mm grid members are built to withstand the mechanical stresses of long-term deployment in remote, unmonitored locations. |
| Ultimate Link Margin | The primary advantage is its massive 28 dBi gain. This allows for "over-the-horizon" or extremely long-distance point-to-point links, effectively bridging gaps between remote sites that would otherwise require multiple relay stations. |
| Razor-Sharp Directivity | With a 6-degree beam-width, the antenna focuses RF energy with extreme precision. This not only maximizes signal reach but also ensures that the link is inherently secure and highly resistant to interception or interference from adjacent signals. |
| Superior Interference Rejection | Featuring a 42 dB Front-to-Back ratio, the AP-85028 is nearly "blind" to noise and signals originating from behind the station. Combined with 36 dB cross-polarized discrimination, it provides the high signal-to-noise ratio (SNR) required for high-capacity digital data streams. |
| Low Wind Loading | Unlike solid parabolic dishes of this size, the grid architecture allows wind to pass through the reflector. This significantly reduces the "sail effect" and torque on the tower, allowing a 4-meter dish to be safely mounted in environments where a solid dish would be structurally impossible. |
| Precision Alignment | The integrated elevation tracking mechanism (+/- 5 degrees) allows for fine-tuning after the antenna is mounted. This is critical for optimizing long-distance links where even a 1-degree misalignment can lead to significant signal loss. |
| Infrastructure Cost Reduction | By enabling longer-distance hops, the AP-85028 can reduce the total number of relay towers required for a cross-country link, significantly lowering capital and maintenance expenditures. |
| Professional & Regulatory Compliance | Being 100% FCC Part 101.115 compliant, this antenna meets the strict standards required for high-capacity directional communication in the United States and other regulated markets. |
| Maritime & Coastal Resilience | Constructed from anodized 6063T6 aluminum with 316 stainless steel fasteners, the antenna is essentially immune to salt fog and high humidity. The ABS-enclosed feed ensures that the sensitive radiating elements never come into contact with corrosive elements. |
| Equipment Safety | The D.C. grounded design provides a safe discharge path for atmospheric static and lightning-induced surges, protecting expensive radio transceivers and sensitive digital backhaul equipment. |
| Published detail | 4. Over-the-Horizon (OTH) Communication: Specialized for links that must travel beyond the visual horizon by utilizing the extreme 28 dBi gain to capture weak signals across vast distances. |
| Frequency stated in title | 700-1000 MHz |
| Gain stated in title | 28 dBi |
| Category | Horn, Dish, Grid & Log Periodic |