| Model | AP-45020 |
| Frequency (manufacturer model field) | 406-512MHz. |
| Bandwidth (manufacturer model field) | 40 MHz |
| Gain (manufacturer model field) | 20 dBi. |
| Frequency Range | 406 - 512 MHz. |
| Gain | 20 dBi. |
| Bandwidth | 40 MHz. |
| Polarization | Vertical or Horizontal |
| Input Impedance | 50 Ohms. |
| Radiation Pattern | Directional |
| Beamwidth -3dB. | 15 Degrees |
| Front to Back Ratio | 40 dB. |
| Cross Polarization | 36 dB. |
| VSWR - Equal To or Better Then | 1:1.5 |
| RF Power Handling Capacity | 250 Watts. |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 195 Km/Hr. |
| Support Pipe O.D. | 76 mm (3 Inches) |
| Support Pipe Material | 6063T6 Aluminum Alloy |
| Diameter of Parabolic Reflector | 3.0 Meters |
| Radiating Material | High Quality Brass |
| Grid Members Material | Aluminum Tube - 5/8 Inch |
| Maximum Mount Pipe Diameter | 115 mm (4.5 Inches) |
| Gross Weight | 115 Kgs. |
| Operating Temperature | (-)30 to +70 Degrees Celcius |
| Storage Temperature | (-)40 to +80 Degrees Celcius |
| Humidity | 0 to 95% RH |
| Strategic Gain | Delivers a mid-band gain of 20 dBi. This provides the necessary link margin to maintain stable digital or analogue communication over vast geographical distances. |
| Precision Directivity | Features a 15-degree half-power beam-width. This narrow focus concentrates RF energy toward the target receiver, maximizing signal density and providing inherent security against interception. |
| Signal Isolation | Front-to-Back Ratio: 38 dB, effectively eliminating noise and unwanted signals originating from the rear of the antenna.Cross-Polarization Discrimination: 34 dB, maintaining high signal purity for complex digital modulation schemes. |
| Front-to-Back Ratio | 38 dB, effectively eliminating noise and unwanted signals originating from the rear of the antenna. |
| Cross-Polarization Discrimination | 34 dB, maintaining high signal purity for complex digital modulation schemes. |
| Advanced Feed System | Utilizes a primary feed horn with an Air-Cored transmission line. The radiating elements and dipole feed are manufactured from high-quality brass for maximum electrical conductivity and minimal internal loss. |
| D.C. Grounding | The antenna operates at direct D.C. ground with a low-resistance discharge path. This provides essential protection against lightning-induced transients and atmospheric static noise. |
| Reflector Architecture | The massive 3.0-meter (10-foot) diameter grid is constructed from 6063T6 architectural-grade anodized aluminum alloy. The grid design (using 16mm grid members) is specifically chosen to minimize wind load and structural torque on the tower. |
| Enhanced Rigidity | Dual Side Struts: Supplied with two side struts to provide extra support and prevent mechanical deflection of the parabolic surface under high wind or vibration.Support Pipe: Features a robust 76 mm (3-inch) outer diameter aluminum support pipe for internal framework stability. |
| Dual Side Struts | Supplied with two side struts to provide extra support and prevent mechanical deflection of the parabolic surface under high wind or vibration. |
| Support Pipe | Features a robust 76 mm (3-inch) outer diameter aluminum support pipe for internal framework stability. |
| Alignment & Tracking | Elevation Mechanism: Includes an integrated tracking mechanism allowing for fine-tuned adjustments of +/- 5 degrees.Polarization Versatility: Rear mounting hardware permits the operator to change polarization from Horizontal to Vertical (and vice-versa) in the field. |
| Elevation Mechanism | Includes an integrated tracking mechanism allowing for fine-tuned adjustments of +/- 5 degrees. |
| Polarization Versatility | Rear mounting hardware permits the operator to change polarization from Horizontal to Vertical (and vice-versa) in the field. |
| Heavy-Duty Mounting | Designed for installation on vertical erected masts with a maximum diameter of 115 mm (4.5 inches). |
| Fasteners | Every screw, nut, and bolt is manufactured from Type 316 Marine Grade Stainless Steel to prevent oxidation and ensure a long maintenance-free service life. |
| Hurricane-Grade Resilience | The open-grid design allows wind to pass through the reflector, achieving a high wind rating of 190 Km/Hr (118 MPH). |
| Theater-Hardened Finish | The aluminum alloy is anodized and then finished with an epoxy-based anti-corrosive powder coating in military Olive Green, protecting the structure from salt fog, UV degradation, and industrial pollutants. |
| Extreme Thermal Window | Operating Temperature: -30°C to +70°C.Storage Temperature: -40°C to +80°C. |
| Operating Temperature | -30°C to +70°C. |
| Storage Temperature | -40°C to +80°C. |
| Humidity Tolerance | Fully certified for operation in 0 to 95% RH environments, preventing performance drift in tropical or high-humidity climates. |
| Exceptional Link Margin | The primary advantage is its strategic 20 dBi gain. This provides the necessary power to establish high-capacity, long-distance point-to-point hops, effectively bridging gaps between remote tactical sites or regional infrastructure hubs where path loss is severe. |
| Focused Directivity | With a 15-degree beam-width, the antenna focuses RF energy with precision. This not only maximizes signal reach but also ensures the link is inherently secure and highly resistant to interception or co-site interference. |
| Superior Signal Isolation | Featuring a 38 dB Front-to-Back ratio, the AP-45020 is effectively "blind" to noise and signals originating from behind the station. Combined with 34 dB cross-polarization discrimination, it provides the high signal-to-noise ratio (SNR) required for advanced digital data backhaul. |
| Low Drag Grid Design | Unlike solid parabolic dishes of this size, the grid architecture allows wind to pass through the reflector. This significantly reduces the structural torque on the tower, allowing a 10-foot dish to be safely mounted in environments where a solid dish would be structurally impossible. |
| Dynamic Alignment & Stability | The integrated elevation tracking mechanism (+/- 5 degrees) and dual side struts allow for extensive fine-tuning and mechanical stability. This is critical for optimizing links across uneven terrain where mechanical deflection must be minimized to keep the 15-degree beam on target. |
| Spectrum Versatility | Specifically engineered to provide peak performance across the 406-512 MHz range, ensuring compliance and efficiency for a wide variety of public safety, utility, and military radio bands. |
| Infrastructure Consolidation | By enabling longer-distance hops with high stability, the AP-45020 can reduce the total number of relay towers required for a cross-country link, lowering overall capital and maintenance expenditures. |
| Theater-Hardened Resilience | Constructed from anodized 6063T6 aluminum with 316 stainless steel fasteners, the antenna is immune to salt fog and high humidity. The epoxy-based powder coating ensures the structure survives decades in harsh coastal or industrial climates. |
| Electrical Equipment Shielding | The direct D.C. ground operation provides an immutable discharge path for lightning, protecting expensive and sensitive ground-station radio equipment from damage. |
| Frequency stated in title | 406-512 MHz |
| Gain stated in title | 20 dBi |
| Category | Horn, Dish, Grid & Log Periodic |