Log-Periodic Antenna

AW-LP0858-2×11 0.8-5.8 GHz Log-Periodic Antenna (2×11 dBi)

Name: AW-LP0858-2x11
Brand: astronwireless.com

0.8-5.8 GHz log-periodic antenna — 2x11 dBi gain, dual ±45° slant polarization, N-Female connector.

AW-LP0858-2x11 — 0.8-5.8 GHz, log-periodic antenna

AW-LP0858-2x11 specifications
Model	AW-LP0858-2x11
Frequency Range	800–5800 MHz
Gain	2x11 dBi
Polarization	Dual ±45° slant
Half-Power Beamwidth	52° (H) × 44° (V)
Dimensions	700 × 340 × 90 mm
Connector	N-Female
Impedance	50 Ω
VSWR	≤ 2.0:1
Power Handling	50 W
Ports	2
Ingress Protection	IP65
Material / Radome	Anodized aluminum elements / ABS boom

Designed for 5g nr sub-6 ghz, the AW-LP0858-2×11 is a 0.8-5.8 GHz log-periodic antenna rated at 2×11 dBi. Its dual ±45° slant polarization and tuned matching network keep return loss low across the full operating band.

Radiation Pattern and Gain

The half-power beamwidth is approximately 52 degrees in azimuth by 44 degrees in elevation, concentrating radiated energy toward the intended service area and improving signal-to-noise ratio at the cell edge. The rated gain of 2×11 dBi is referenced to an isotropic radiator.

Mechanical and Electrical Specifications

Mechanically, the AW-LP0858-2×11 measures 700 x 340 x 90 mm and is housed in a Anodized aluminum elements / ABS boom. The standard interface is a N-Female connector, with a nominal impedance of 50 ohms and a typical VSWR of 2.0:1 or better. The element withstands up to 50 W of input power.

Multi-Port Configuration

This model is supplied as a 2-port assembly, enabling spatial diversity or MIMO operation. Each port presents an independent 50 ohm feed.

Installation Guidance

The recommended installation is rooftop mast / balcony. The enclosure carries an IP65 environmental rating for outdoor exposure. For best results, mount the antenna with clear line of sight to the served area and bond all outdoor hardware to a proper grounding system.

Typical Applications

5G NR Sub-6 GHz
CPE / Subscriber Units
Fixed Wireless Broadband

Request a Quote

Need this antenna with a custom connector, cable length, or radome color? Use the antenna configurator to confirm the specification and submit an inquiry for AW-LP0858-2×11.

Frequency Band Required Gain (dBi) Polarization Installation Environment Antenna Type Connector (optional)

Advanced filters (dimension limits)

Max Length (mm) Max Width (mm) Max Height (mm)

Submit Your Inquiry

Technical Parameters

Target Frequency (MHz) Desired Gain (dBi) Polarization Connector Max VSWR Power Handling (W)

Business Information

Company / Name * Contact Name * Email * Phone (with country code) Country / Region Estimated Quantity Required Delivery

Application / Notes

Frequently Asked Questions

What is a log-periodic antenna used for?

Frequency-independent directional arrays whose element lengths scale geometrically, giving usable gain and front-to-back ratio across a decade of bandwidth in one aperture.

Is AW-LP0858-2x11 suitable for 5g nr sub-6 ghz?

Yes. AW-LP0858-2x11 is well matched to 5g nr sub-6 ghz deployments, where its radiation pattern and gain provide reliable coverage and link margin.

Can the connector on AW-LP0858-2x11 be changed?

Yes. The default RF interface can be supplied as SMA, N-type, TNC, or other connectors on request, and custom cable assemblies are available. Specify your interface in the inquiry form.

What is the standard impedance and VSWR of AW-LP0858-2x11?

The nominal impedance is 50 ohms with a typical VSWR of 1.5:1 or better across the operating band. A 75 ohm option can be quoted for broadcast applications.

How do I request a quote for AW-LP0858-2x11?

Use the antenna configurator on this page to confirm the specification, then submit the inquiry form. An engineer from astronwireless.com will respond within one business day.

Accessories & Components

Complete your installation with matched RF cables, connectors, mounts, adapters and bulk coaxial cable. Custom assemblies, lengths and interfaces are available on request.