0.7-2.7 GHz embedded fpc / pcb antenna — 2 dBi gain, linear polarization, Solder pad connector.
AW-PCB0827-2 specifications
Model
AW-PCB0827-2
Frequency Range
698–2700 MHz
Gain
2 dBi
Polarization
Linear
Half-Power Beamwidth
360° (H) × 90° (V)
Dimensions
55 × 20 × 1 mm
Connector
Solder pad
Impedance
50 Ω
VSWR
≤ 1.5:1
Power Handling
5 W
Material / Radome
Flexible PCB / FR4
Operating across 0.7-2.7 GHz, the AW-PCB0827-2 embedded fpc / pcb antenna provides 2 dBi gain and linear polarization. The design targets iot / m2m deployments that demand reliable coverage and stable impedance matching.
Radiation Pattern and Gain
As an omnidirectional radiator, it provides a full 360 degree azimuth pattern with an approximate 90 degree elevation beamwidth, distributing energy evenly around the mast. The rated gain of 2 dBi is referenced to an isotropic radiator.
Mechanical and Electrical Specifications
Mechanically, the AW-PCB0827-2 measures 55 x 20 x 1 mm and is housed in a Flexible PCB / FR4. The standard interface is a Solder pad connector, with a nominal impedance of 50 ohms and a typical VSWR of 1.5:1 or better. The element withstands up to 5 W of input power.
Installation Guidance
The recommended installation is embedded / internal. For best results, mount the antenna with clear line of sight to the served area and bond all outdoor hardware to a proper grounding system.
Typical Applications
IoT / M2M
Embedded Module
Asset Tracking
Request a Quote
Need this antenna with a custom connector, cable length, or radome color? Use the antenna configurator to confirm the specification and submit an inquiry for AW-PCB0827-2.
Advanced filters (dimension limits)
Frequently Asked Questions
What is a embedded fpc / pcb antenna used for?
Internal flexible-PCB and PCB-trace antennas for embedded modules and tracking devices.
Is AW-PCB0827-2 suitable for iot / m2m?
Yes. AW-PCB0827-2 is well matched to iot / m2m deployments, where its radiation pattern and gain provide reliable coverage and link margin.
Can the connector on AW-PCB0827-2 be changed?
Yes. The default RF interface can be supplied as SMA, N-type, TNC, or other connectors on request, and custom cable assemblies are available. Specify your interface in the inquiry form.
What is the standard impedance and VSWR of AW-PCB0827-2?
The nominal impedance is 50 ohms with a typical VSWR of 1.5:1 or better across the operating band. A 75 ohm option can be quoted for broadcast applications.
How do I request a quote for AW-PCB0827-2?
Use the antenna configurator on this page to confirm the specification, then submit the inquiry form. An engineer from astronwireless.com will respond within one business day.
Accessories & Components
Complete your installation with matched RF cables, connectors, mounts, adapters and bulk coaxial cable. Custom assemblies, lengths and interfaces are available on request.
