Designed for wi-fi coverage, the AW-MM2425-4×15 is a 2.4-2.5 GHz mimo antenna rated at 4×15 dBi. Its dual ±45° slant / mimo polarization and tuned matching network keep return loss low across the full operating band.
Radiation Pattern and Gain
The half-power beamwidth is approximately 60 degrees in azimuth by 14 degrees in elevation, concentrating radiated energy toward the intended service area and improving signal-to-noise ratio at the cell edge. The rated gain of 4×15 dBi is referenced to an isotropic radiator.
Mechanical and Electrical Specifications
Mechanically, the AW-MM2425-4×15 measures 405 x 140 x 28 mm and is housed in a ASA / fiberglass radome. The standard interface is a N-Female connector, with a nominal impedance of 50 ohms and a typical VSWR of 1.5:1 or better. The element withstands up to 100 W of input power.
Multi-Port Configuration
This model is supplied as a 4-port assembly, enabling spatial diversity or MIMO operation. Each port presents an independent 50 ohm feed.
Installation Guidance
The recommended installation is outdoor, pole-mounted. The enclosure carries an IP65 environmental rating for outdoor exposure. For best results, mount the antenna with clear line of sight to the served area and bond all outdoor hardware to a proper grounding system.
Typical Applications
- Wi-Fi Coverage
- CPE / Subscriber Units
- IoT / M2M
Request a Quote
Need this antenna with a custom connector, cable length, or radome color? Use the antenna configurator to confirm the specification and submit an inquiry for AW-MM2425-4×15.