Skip to content
WDHP-800-2000 High Power Discone \| 800-2000 MHz 500W Omni Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Radio Communications › Scanner & Wideband Receive

WDHP-800-2000 High Power Discone \| 800-2000 MHz 500W Omni Antenna

Updated 2026-11-19 · Markdown version

Model no. WDHP-800-2000

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelWDHP-800-2000
Frequency (manufacturer model field)800-2000MHz
Bandwidth (manufacturer model field)800-2000MHz
Gain (manufacturer model field)2 dBi.
Frequency Range800-2000 MHz
Gain2 dBi.
Bandwidth800-2000 MHz
Antenna TypeOmni
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
Beamwidth -3dB.78 Degrees (Vertical)
VSWR - Equal To or Better Then2:1
RF Power Handling Capacity500 Watts CW
Input TerminationN or DIN Female
Antenna MaterialsAluminum, ABS & SS
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length200 mm
Shipping Length250 mm
Radiating Material6063T6 Aluminium Alloy
Insulator MaterialTEFLON
Maximum Mount Pipe Diameter52 mm (2 Inches)
Radome MaterialHigh Strength ABS
Gross Weight< 1.5 Kgs.
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH
Continuous 500W Power HandlingMost wideband omni antennas fail under the thermal stress of high-power jamming. The fully welded junctions and high-grade materials of the WDHP-800-2000 allow it to sustain 500 Watts of continuous RF energy across the entire band.
Massive Vertical BeamwidthWith a 78-degree vertical beamwidth, this antenna provides exceptional hemispherical coverage. This makes it ideal for ground-to-air communication and monitoring where the target may be at a high elevation angle relative to the base station.
Zero Field TuningThe discone architecture provides an inherently low VSWR (Better than 2:1) across the full 1200 MHz bandwidth. This "plug-and-play" capability is vital for rapid-deployment tactical sites.
Fully Welded 6063T6 AluminumEvery element junction is welded to prevent RF inter-modulation (PIM) and mechanical loosening caused by vibration. This is critical for Oceanic and Arctic applications where wind and ice loading are constant threats.
ABS Radome & Epoxy CoatingAll internal junctions are protected by a high-impact ABS radome, while external metal surfaces receive an epoxy powder coating. This provides a total shield against salt spray, acid rain, sandstorms, and UV radiation.
Internal TerminationThe N-Female termination is housed inside the mounting pipe, ensuring the cable connection is never exposed to the elements, preventing moisture ingress and signal degradation.
Unified 800–2000 MHz CoverageReplaces multiple antennas for GSM, LTE, and S-band monitoring.
Extreme 500W RF CapacityOptimized for high-intensity Electronic Warfare (EW) and jamming.
Rugged ABS EnclosureProtects radiating elements from ice formation and physical impact.
Omnidirectional 2.15 dBi GainProvides a consistent 360° "safety bubble" for convoy or base protection.
MIL-STD-810G CertifiedTested for extreme shock, vibration, and salt fog survivability.
Marine-Grade HardwareAll fasteners are Type 316 stainless steel for zero-corrosion longevity.
The Discone AdvantageThe 78-degree vertical beamwidth ensures that whether the signal source is on the horizon or high in the sky, the WDHP-800-2000 maintains a stable link.
The Discone AdvantageMost omni antennas have a narrow vertical beam (often <10 degrees), meaning they "lose" signals as an aircraft flies overhead. The WDHP-800-2000’s 78-degree vertical beamwidth ensures a constant link from the horizon up to near-zenith angles.
Published detail360° Monitoring: Whether a target is a GSM-900 handset on the street or an L-Band telemetry link 30,000 feet in the air, this antenna maintains a stable 2.15 dBi gain across the entire 360-degree azimuth.
Bubble ProtectionThis high power handling allows for the creation of a massive "denial bubble," effectively drowning out adversary signals across the entire 800–2000 MHz range, protecting fixed sites or mobile command centers from remote triggers.
Ice-Loading ProtectionThe Cylindrical ABS Radome provides a smooth, tapered surface that prevents ice from anchoring to the radiating elements. This ensures that even in sub-zero "icing" conditions, the antenna's weight remains manageable and its VSWR (2:1) stays stable.
PIM SuppressionBy welding all internal junctions, the antenna eliminates Passive Inter-Modulation (PIM). This is critical for SIGINT, as it prevents the antenna itself from generating "phantom signals" that can interfere with sensitive receiver equipment in high-vibration environments.
Published detailFor sensitive SIGINT operations, the "Noise Floor" is the ultimate enemy. High-speed wind moving across 800-2000 MHz elements creates Precipitation Static (P-Static).
The SolutionThe WDHP-800-2000 is D.C. Grounded. It constantly bleeds off static charge to the mast and earth. This ensures an ultra-low noise floor, allowing a connected receiver to detect low-power "hidden" transmissions or weak frequency-hopping signals that would be buried in the static of an ungrounded antenna.
Height vs. ObstructionBecause the discone has a very wide vertical beam, it is sensitive to objects nearby. Mount the antenna at the absolute top of the mast to prevent the mast itself or nearby structures from reflecting the 78-degree signal.
Cable Integrity at L-BandAt 2000 MHz (2 GHz), cable loss is severe. Do not use standard RG-58. Use LMR-400 or LMR-600. Every 3 dB of cable loss effectively cuts your 500W jamming power or reception sensitivity in half.
Weather-Proof TerminationThe N-Female connection is housed inside the mounting pipe. Ensure the cable is securely tightened and the pipe is sealed to prevent moisture from traveling up the cable jacket, which can detune the 2:1 VSWR.
Multi-Antenna SpacingIf deploying near other antennas, maintain at least 2 meters of vertical separation. The wide vertical beam of the WDHP-800-2000 can easily "talk" to other antennas on the same mast, potentially desensitizing other receivers.
Frequency stated in title800-2000 MHz
CategoryScanner & Wideband Receive

Description

WDHP-800-2000 High Power Discone \| 800-2000 MHz 500W Omni Antenna is part of our scanner & wideband receive range (Radio Communications).

Key details

  • Frequency Range: 800-2000 MHz
  • Gain: 2 dBi.
  • Polarization: Vertical
  • Model: WDHP-800-2000
  • Frequency (manufacturer model field): 800-2000MHz
  • Bandwidth (manufacturer model field): 800-2000MHz
  • Gain (manufacturer model field): 2 dBi.
  • Bandwidth: 800-2000 MHz

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for WDHP-800-2000 High Power Discone \| 800-2000 MHz 500W Omni Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of WDHP-800-2000 High Power Discone \| 800-2000 MHz 500W Omni Antenna?

Frequency Range: 800-2000 MHz; Gain: 2 dBi.; Polarization: Vertical; Model: WDHP-800-2000; Frequency (manufacturer model field): 800-2000MHz; Bandwidth (manufacturer model field): 800-2000MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other scanner & wideband receive are available?

The Scanner & Wideband Receive category lists 89 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/radio-communications/scanner-and-wideband-receive/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote