| Model | CWD-20-500 |
| Frequency (manufacturer model field) | 20-500 MHz |
| Bandwidth (manufacturer model field) | 20-500MHz |
| Gain (manufacturer model field) | 2.15 dBi |
| Frequency Range | 20-500 MHz |
| Gain | 2.15 dBi |
| Bandwidth | 20-500MHz |
| Polarization | Vertical |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Omni-directional |
| Beamwidth -3dB. | 78 Degrees (Elevation) |
| Horizontal Beamwidth -Half Power Points | 360 Degrees |
| VSWR - Equal To or Better Then | See Graph (on request) |
| RF Power Handling Capacity | See Graph (on request) |
| Input Termination | N-Female |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 180 KMPH |
| Mounting Type | 2.1 Meters |
| Shipping Length | 2.3 Meters |
| Maximum Mount Pipe Diameter | 52mm (2 Inches) |
| Gross Weight | 18 Kgs. |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Ultra-Wideband Spectrum Dominance | Engineered for continuous, high-efficiency operation from 20 MHz to 500 MHz. This massive bandwidth allows a single antenna to cover the entire low-band VHF, high-band VHF, and UHF spectrums simultaneously. |
| High-Intensity Power Handling | Designed for mission-critical transmission, supporting up to 700 Watts of RF power in the 40–500 MHz range. This makes it an elite choice for high-power jamming and wide-area tactical broadcasting. |
| Passive Loading Innovation | Incorporates a specialized passive loading technique at the lower frequency edge. This allows for a significantly more compact physical profile than traditional discones without sacrificing radiation efficiency (maintaining >96% efficiency across the band). |
| True Omni-Directional Pattern | Delivers a perfectly symmetrical 360-degree horizontal radiation pattern, ensuring uniform signal distribution and reception in all directions. |
| Ground-to-Air Aperture | Features an exceptionally wide 78-degree vertical beamwidth. This high-angle coverage is critical for maintaining clear communication with aircraft and providing superior link stability in mountainous or urban "canyon" environments. |
| Protected Feed Architecture | The N-Female termination and feeder cable are fully enclosed within the stainless steel mounting pipe. This "internalized feed" design provides 100% protection from moisture, ice, and mechanical damage. |
| Optimized VSWR Performance | Engineered for low VSWR (typically better than 2.5:1) across 95% of the operating band, ensuring maximum power transfer and protection for sensitive transmitter hardware. |
| Architectural Material Integrity | Constructed from 6063T6 aluminum alloy radiating elements and high-strength Teflon/Nylon insulators for superior electrical isolation and mechanical strength. |
| Aerodynamic Wind Rating | Specifically designed with a low-profile radome-free architecture to withstand constant wind speeds up to 180 Km/Hr (112 MPH). |
| Thermal Extreme Resilience | Certified for flawless operation in high/low temperature extremes ranging from -40°C to +80°C (Method 500.5/502.5). |
| Corrosion-Proof Suite | All metal surfaces are finished with a high-durability Epoxy Powder Coating, providing immunity to salt spray, ultraviolet radiation, and acid rain (Method 509.5). |
| Desert & Sandstorm Defense | The ruggedized finish and sealed mounting points ensure the antenna remains operational in abrasive, high-dust desert theaters. |
| Mechanical Survivability | Fully tested for High-Impact Shock (Procedure IV) and Tactical Vibration (Procedure I), ensuring the elements remain intact during heavy-duty installations on tactical masts or high-vibration towers. |
| Moisture & Biological Protection | Certified for 0 to 95% Relative Humidity and high-velocity horizontal rain (Method 507.5/506.5). It is also treated for Fungus Resistance (Method 508.6) to prevent degradation in tropical climates. |
| Marine-Grade Hardware | Every screw, nut, bolt, and bracket is fabricated from Type 316 Stainless Steel, preventing the galvanic corrosion common in offshore or coastal deployments. |
| Elite Size-to-Performance Ratio | By utilizing advanced passive loading technology, the CWD-20-500 achieves a significantly smaller physical footprint than standard 20 MHz discone antennas. This compact design allows for installation on smaller tactical masts and roof-mounts without sacrificing the massive 480 MHz operational bandwidth. |
| Massive 700-Watt Transmit Capacity | Unlike most wideband monitoring antennas that are receive-only, the CWD-20-500 is built for high-power electronic attack. It can handle sustained 700 Watts of RF power (40–500 MHz), making it a dominant source for wideband jamming and long-range tactical broadcasting. |
| Total Feed-Line Protection | The N-Female termination is housed internally within the stainless steel mounting pipe. This critical design feature ensures that the most vulnerable part of the antenna system—the cable connection—is 100% shielded from moisture ingress, salt-fog corrosion, and mechanical strain. |
| Maximum Radiation Efficiency | The antenna maintains an efficiency of over 96% across the entire band. By avoiding lossy active components or heavy loading coils, it ensures that almost every watt of energy from the transmitter is converted into radiated signal. |
| Boresight Stability in High Winds | Constructed from high-strength 6063T6 architectural aluminum and supported by a stainless steel mast, the antenna is rated for 180 Km/Hr winds, ensuring the omni-directional pattern remains stable even in severe storm conditions. |
| Logistics & Inventory Consolidation | A single CWD-20-500 replaces the need for a warehouse of narrowband antennas (Low-band VHF, High-band VHF, and UHF). This reduces the logistics tail for tactical units and significantly lowers the wind-loading profile on communications towers. |
| Ground-to-Air Connectivity | The exceptionally wide 78-degree vertical beamwidth ensures a reliable link with aircraft and UAVs at varying altitudes. This eliminates the "cone of silence" often encountered with high-gain antennas when aerial assets are directly overhead or at high look-angles. |
| Zero-Maintenance Operation | The combination of Type 316 stainless steel hardware and an epoxy powder-coated finish means the antenna can be installed in coastal or desert theaters and left for years without degradation or the need for field tuning. |
| Optimized Signal-to-Noise Ratio (SNR) | The vertical polarization and true omni-directional pattern provide a clean, consistent reference for spectrum monitoring and SIGINT collection across a massive frequency range. |
| Spectrum Monitoring & SIGINT | Serving as a high-sensitivity "master probe" for the interception and analysis of tactical radio traffic, cellular signals, and emergency service communications from 20 to 500 MHz. |
| High-Power Electronic Warfare (EW) | Acting as a wideband jamming source to deny RCIED triggers and disrupt tactical VHF/UHF voice and data networks in a localized area. |
| Multi-Agency Base Stations | Providing a unified antenna solution for police, fire, medical, and military headquarters that need to monitor or communicate across diverse frequency bands simultaneously. |
| Maritime & Coastal Surveillance | Ideal for ship-to-shore and ship-to-air communications in high-salinity environments, where standard aluminum antennas would typically fail due to corrosion. |
| Ground-to-Air Defense Links | Establishing reliable directional and omni-directional links for Air Traffic Control (ATC) and tactical air-defense coordination. |
| Tactical Mobile Command | Rapidly deployable on pneumatic masts to provide an immediate wideband communications "bubble" for field headquarters and disaster recovery centers. |
| Frequency stated in title | 20-500 MHz |
| Category | Scanner & Wideband Receive |