Skip to content
LP-130-190 VHF High Band LPDA \| 130-190 MHz 9 dBi Tactical Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

LP-130-190 VHF High Band LPDA \| 130-190 MHz 9 dBi Tactical Antenna

Updated 2026-11-19 · Markdown version

Model no. LP-130-190

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelLP-130-190
Frequency (manufacturer model field)130-190MHz
Bandwidth (manufacturer model field)130-190MHz
Gain (manufacturer model field)9 dBi
Frequency Range130 - 190 MHz
Gain9 dBi
Bandwidth130-190MHz
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points60 Degrees
Front to Back Ratio16 dB
VSWR - Equal To or Better Then2:1
RF Power Handling Capacity2.5 KW CW
Input TerminationN-Female
Lightning ProtectionDirect Ground
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsStainless Steel
Wind Rating200 Km/Hr.
Overall Length1500 mm
Shipping Length1600 mm
Support Boom -Material - O.D.Aluminum-Square Tube25.4mm (1 Inch)
Elements - Materials- Cross Section - Outer DiameterAluminum-Round Tube12.7mm (1/2 Inch)
Insulator MaterialTeflon & Delrin
Maximum Mount Pipe Diameter52 mm (2 Inches)
Gross Weight8 Kgs.
Operating Temperature(-) 30 to +60 Degrees Celsius
Storage Temperature(-) 40 to +70 Degrees Celsius
Humidity0 to 95% RH
Massive 2.5KW Power CapacityEngineered to handle continuous-wave (CW) power up to 2500 Watts. This makes the LP-130-190 a formidable tool for high-intensity Electronic Countermeasures (ECM) and strategic long-range broadcasting.
Focused 9 dBi GainBy utilizing full-sized radiating elements, the antenna achieves exceptional gain and a tight 60-degree horizontal beamwidth. This allows for surgical precision in signal targeting and significantly increased reception range compared to standard antennas.
Rear-End Mounting MasteryThe mounting bracket is permanently welded at the rear of the boom. This ensures the 52mm (2-inch) support mast remains completely outside the radiation pattern, preventing gain degradation and pattern distortion.
MIL-STD-810G CertifiedRigorously tested for extreme temperature, shock, vibration, and salt fog. It is specifically engineered to survive monsoon, desert, or coastal deployments where saline air is a constant threat.
Marine-Grade DurabilityAll fasteners (screws, nuts, and bolts) are made of Type 316 marine-grade stainless steel. The entire unit is protected by an electrostatic Olive Green epoxy powder coating for total corrosion resistance.
Integrated SafetyOperates at D.C. ground, providing a low-resistance discharge path for lightning and suppressing atmospheric static for a high-sensitivity "quiet" noise floor during SIGINT operations.
The Precision AdvantageThe focused 60-degree beamwidth of the LP-130-190 acts as a directional "spotlight." This allows an operator to isolate a specific target while physically "nulling out" interference from the sides and rear.
The 9 dBi AdvantageThe focused 60-degree horizontal beamwidth of the LP-130-190 acts as an RF "spotlight." This allows an operator to isolate a specific aircraft's transmission or a distant ground station while physically "nulling out" interference from the sides and rear.
Range ExtensionEvery 6 dB of gain effectively doubles your reception range. With 9 dBi, this antenna can pull in weak tactical signals from distances where standard dipole antennas would only see static.
Published detailSignals at 130–190 MHz can reflect sharply off large metal structures, ships, or urban buildings. Each reflection can cause the signal's polarization to shift—a phenomenon known as Polarization Rotation.
The "Null" ProblemMost tactical handhelds and maritime whips are vertically polarized. If a signal reflects off a slanted surface, it may arrive at your site with a significant horizontal shift. A standard vertical antenna would experience a signal dropout of up to 20 dB.
The Tactical SolutionThe LP-130-190 features a flexible mounting arrangement that allows operators to switch between Horizontal and Vertical polarization in seconds. This ensures you can match the orientation of the incoming reflected wave to maintain a stable, high-fidelity intercept.
Published detailTo successfully disrupt a target link (e.g., a 150 MHz maritime coordination net or an aviation command link), you must achieve a superior Jamming-to-Signal (J/S) ratio at the victim’s receiver.
Published detail2.5KW Strategic Power: The LP-130-190 acts as a massive directional "floodlight." Its 9 dBi gain acts as an RF magnifying glass, concentrating 2,500 Watts of energy into a focused 60-degree cone.
ERP AdvantageThis concentration exponentially increases your Effective Radiated Power (ERP). You can successfully "drown out" a legitimate signal from far beyond the horizon, even when the adversary is using high-power fixed-site transmitters.
The SolutionThe LP-130-190 is D.C. Grounded. It constantly bleeds off this static charge to the mast and earth. This ensures the lowest possible noise floor, allowing you to detect low-power "hidden" transmissions or frequency-hopping signals that would be buried in the static of an ungrounded antenna.
Rear-Mount AdvantageSince the mount is at the rear of the 1.5-meter boom, you can use a standard metal mast without worrying about it distorting your signal. Ensure the mast is at least 52mm (2 inches) in diameter for stability.
High-Power Cable IntegrityWhen running at 2.5KW, standard cables are a fire hazard. Use LMR-600 or corrugated copper feeders. Every 3 dB of cable loss effectively cuts your jamming power or reception sensitivity in half.
Rapid 5-Minute SetupTake full advantage of the removable, segmented elements. In modern EW, speed is survival. The LP-130-190's speed of assembly/disassembly is a key survivability feature for "jump" missions.
Boresight AlignmentBecause the beamwidth is 60 degrees, a 30-degree error in alignment will drop your gain significantly. Use a compass to ensure the antenna is pointed exactly at the target sector for maximum intercept probability.
Frequency stated in title130-190 MHz
Gain stated in title9 dBi
CategoryHorn, Dish, Grid & Log Periodic

Description

LP-130-190 VHF High Band LPDA \| 130-190 MHz 9 dBi Tactical Antenna is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Frequency Range: 130 – 190 MHz
  • Gain: 9 dBi
  • Polarization: Vertical or Horizontal
  • Model: LP-130-190
  • Frequency (manufacturer model field): 130-190MHz
  • Bandwidth (manufacturer model field): 130-190MHz
  • Gain (manufacturer model field): 9 dBi
  • Bandwidth: 130-190MHz

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for LP-130-190 VHF High Band LPDA \| 130-190 MHz 9 dBi Tactical Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of LP-130-190 VHF High Band LPDA \| 130-190 MHz 9 dBi Tactical Antenna?

Frequency Range: 130 - 190 MHz; Gain: 9 dBi; Polarization: Vertical or Horizontal; Model: LP-130-190; Frequency (manufacturer model field): 130-190MHz; Bandwidth (manufacturer model field): 130-190MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote