Skip to content
LP-20-100 Tactical LPDA \| 20-100 MHz 7 dBi Military VHF Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

LP-20-100 Tactical LPDA \| 20-100 MHz 7 dBi Military VHF Antenna

Updated 2026-11-19 · Markdown version

Model no. LP-20-100

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelLP-20-100
Frequency (manufacturer model field)20-100MHz
Bandwidth (manufacturer model field)20-100MHz
Gain (manufacturer model field)9 dBi.
Frequency Range20-100 MHz
Gain9 dBi.
BandwidthEntire Band
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points100 +/-5 Degrees
Front to Back Ratio15 +/-1 dB.
VSWR - Equal To or Better Then1:3
RF Power Handling Capacity1000 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground
Antenna Materials6062T6 Powder Coated Aluminum
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating180 Km/Hr.
Overall Length6 Meters
Shipping Length3.5 Meters
Support Boom- Materials- Cross Section- Outer Diameter.AluminumSquare Tube38mm
Elements- Materials- Cross Section- Outer Diameter.AluminumRound Tube25-19mm
Insulator MaterialTeflon & Delrin
Maximum Mount Pipe Diameter76mm (3 Inches)
Gross Weight40 Kgs.
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH
Full-Sized Aperture EfficiencyBy utilizing full-sized radiating elements across its 7.5-meter width, the LP-20-100 maintains superior efficiency and a focused 90-degree horizontal beamwidth. This design ensures that every watt of the 1000W power capacity is projected toward the target.
Fast Deployment SystemDespite its massive physical footprint (5.35m x 7.50m), the antenna features removable, segmented elements and a stainless steel stud system. Two technicians can fully assemble the array in less than 10 minutes, facilitating rapid tactical "jumps."
Mobile PortabilityWith a shipping length of only 2.74 meters, this strategic array is easily transportable in standard tactical containers, bridging the gap between fixed-site performance and mobile flexibility.
Marine-Grade DurabilityAll hardware, including screws and bolts, is made of Type 316 marine-grade stainless steel. The entire unit is finished with a protective powder coating, providing elite resistance against salt fog and humidity in coastal environments.
Integrated SafetyOperates at D.C. ground, providing a low-resistance discharge path for lightning and suppressing atmospheric static for a high-sensitivity "quiet" noise floor during SIGINT operations.
Mechanical StabilityExtra spacers between support booms and a square-tube aluminum boom design ensure the antenna maintains structural integrity in winds up to 180 Km/Hr.
Strategic 20–100 MHz BandwidthIdeal for legacy and modern tactical VHF networks.
High-Efficiency 7 dBi GainConsistent directional precision across the entire band.
Fast 10-Minute AssemblySegmented elements for streamlined tactical logistics.
Center-Boom MountingSecurely fits 50mm to 77mm (2-3 inch) heavy-duty masts.
Polarization AgilityPermits both Vertical and Horizontal orientation.
Direct Ground ProtectionIntegrated lightning protection and enhanced noise immunity.
Published detailAt 20–100 MHz, signals have long wavelengths that can "diffract" or wrap over hills and around obstacles.
Tactical DiversityWhile ground whips are vertical, terrain causes signal rotation. The LP-20-100’s ability to switch to horizontal polarization allows you to "find" a cleaner signal path in mountainous or heavily forested regions.
Published detailSignals in the 20–100 MHz range have long wavelengths (3 to 15 meters). These waves have the unique ability to "diffract"—literally bending over the horizon or around large obstacles like mountains and dense forests.
The Polarization AdvantageWhile most tactical vehicle whips are vertically polarized, terrain and foliage cause significant signal rotation.
Tactical DiversityThe LP-20-100 allows operators to quickly switch to Horizontal polarization. In heavily wooded or mountainous terrain, this can often "find" a cleaner, stronger signal path that a standard vertical whip would miss entirely.
Published detail1000W Strategic Power: The LP-20-100 acts as a massive directional "floodlight." Its 7 dBi gain acts as an RF magnifying glass, concentrating 1 Kilowatt of energy into a focused 90-degree cone.
Denial of ServiceBy concentrating power, you saturate the victim's receiver front-end. This makes it impossible for their radio to maintain "sync" with a hopping sequence, effectively blacking out their command and control.
Published detailThe LP-20-100’s 7 dBi gain allows for the intercept of weak tactical signals from far beyond the range of standard monitoring stations.
Distance InterceptEvery 6 dB of gain effectively doubles your reception range. The 7 dBi gain allows you to "hear" tactical nets and identify troop movements long before they enter your immediate operational area.
Directional TriangulationThe 90-degree horizontal beamwidth acts as a powerful directional sensor. By rotating the antenna, teams can identify the exact bearing of incoming or outgoing transmissions, providing vital early warning and location data.
The SolutionThe LP-20-100 is D.C. Grounded. It constantly bleeds off this static charge to the mast and earth. This ensures the lowest possible noise floor, allowing you to detect low-power "hidden" transmissions or weak signals that would be buried in the static of an ungrounded system.
Rapid 10-Minute SetupTake full advantage of the fast-deployment stud system. In modern EW, speed is survival. The LP-20-100's speed of assembly/disassembly is a key survivability feature.
Cable IntegrityWhen running at 1000W, use LMR-600 or corrugated copper feeders. Standard cables will suffer dielectric breakdown or overheat at high power, leading to catastrophic VSWR failure.
Mast Stability & Wind LoadAt 38 Kgs and 7.5 meters wide, this antenna exerts significant wind load. Ensure your mast (up to 3 inches) is properly guyed. A swaying mast will cause signal "scintillation," making it harder to maintain a lock on a distant target.
Boresight AlignmentBecause the beamwidth is 90 degrees, a 45-degree alignment error will drop your gain significantly. Use a compass to ensure the antenna is pointed exactly at the target sector for maximum intercept probability.
Frequency stated in title20-100 MHz
Gain stated in title7 dBi
CategoryHorn, Dish, Grid & Log Periodic

Description

LP-20-100 Tactical LPDA \| 20-100 MHz 7 dBi Military VHF Antenna is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Frequency Range: 20-100 MHz
  • Gain: 9 dBi.
  • Polarization: Vertical or Horizontal
  • Model: LP-20-100
  • Frequency (manufacturer model field): 20-100MHz
  • Bandwidth (manufacturer model field): 20-100MHz
  • Gain (manufacturer model field): 9 dBi.
  • Bandwidth: Entire Band

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for LP-20-100 Tactical LPDA \| 20-100 MHz 7 dBi Military VHF Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of LP-20-100 Tactical LPDA \| 20-100 MHz 7 dBi Military VHF Antenna?

Frequency Range: 20-100 MHz; Gain: 9 dBi.; Polarization: Vertical or Horizontal; Model: LP-20-100; Frequency (manufacturer model field): 20-100MHz; Bandwidth (manufacturer model field): 20-100MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote