Skip to content
LPDP-1330 Dual Polarized LPDA \| 1300-3000 MHz 7 dBi S-Band Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

LPDP-1330 Dual Polarized LPDA \| 1300-3000 MHz 7 dBi S-Band Antenna

Updated 2026-11-19 · Markdown version

Model no. LPDP-1330

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelLPDP-1330
Frequency (manufacturer model field)1300-3000MHz
Bandwidth (manufacturer model field)1200-3000MHz
Gain (manufacturer model field)7 dBi.
Gain7 dBi.
BandwidthEntire Band
PolarizationDual (Vertical & Horizontal)
Input Impedance50 Ohms
Radiation PatternDirectional
Beamwidth -3dB.75 +/-10 Degrees (Horizontal)
Front to Back Ratio14 +/-2 dB.
VSWR - Equal To or Better Then1:3
RF Power Handling Capacity250 Watts
Input Termination2 x N-Female
Lightning ProtectionDC Ground
Antenna MaterialsAluminum and Brass
Mounting Hardware -MaterialsStainless Steel
Wind Rating200 Km/Hr.
Overall Length0.2 Meter
Shipping Length0.25 Meter
Support Boom -Material - O.D.AluminumSquare Tube
Elements - Materials- Cross Section - Outer DiameterBrassRound Rod
Insulator MaterialTeflon & Nylon
Radiating Elements - Material52mm (2 Inches)
Gross Weight3 Kgs.
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH
Dual-Port Polarization MasteryFeaturing 2 x N-Female input terminations, the antenna captures E & H polarized signals simultaneously. This is critical for preventing "signal fading" caused by the rapid movement of mobile targets or reflections in high-multipath urban environments.
Unloaded Frequency IntegrityBy avoiding electrical loading to reduce its size, the LPDP-1330 maintains a highly efficient radiation pattern and a consistent 7 dBi gain across the entire 1700 MHz bandwidth.
Ultra-Compact FootprintAt only 0.2 meters (8 inches) long, this antenna is ideal for space-constrained installations, including small vehicle mounts, portable tripod setups, or concealed monitoring points.
Fully Assembled LogisticsThe antenna is supplied in a complete, assembled condition, allowing for immediate "plug-and-play" installation. The mounting hardware is positioned at the rear of the support boom to eliminate radiation pattern distortion from the mounting mast.
Integrated D.C. GroundingThe system operates at D.C. ground, providing a low-resistance path for lightning protection and significantly reducing atmospheric noise for sensitive spectrum monitoring applications.
Stainless Steel FastenersAll screws, nuts, and bolts are crafted from high-quality stainless steel, ensuring the antenna remains corrosion-free even in high-humidity or coastal zones.
Simultaneous Dual PolarizationCaptures both Vertical and Horizontal signals without mechanical rotation.
Published detail1300–3000 MHz Bandwidth: Covers S-Band radar, GSM, 4G/5G, and Wi-Fi bands in one unit.
High-Power 250W RatingEngineered for high-duty cycle electronic warfare (EW).
Compact 200mm ProfileMinimal visual and physical footprint for tactical applications.
Rear-End Mounting ClampSecurely fits up to 52mm (2-inch) masts without interfering with the array.
Rugged All-Aluminum BuildLightweight (3 Kgs) yet capable of withstanding 200 Km/Hr winds.
D.C. Grounded SafetyIntegrated lightning protection and enhanced noise immunity.
Wide Operating RangeReliable performance from -30°C up to +70°C.
Published detailIn urban settings, microwave signals (1.3–3 GHz) reflect off buildings like mirrors. These reflections cause the signal to arrive at the antenna with rotated polarization.
The SolutionBy using both ports of the LPDP-1330, your receiver captures the signal on both the vertical and horizontal planes, ensuring a 100% intercept rate even during complex signal rotations.
Published detailAt frequencies up to 3000 MHz, cable loss is the primary enemy of signal strength.
RecommendationUse high-quality, low-loss cables like LMR-400 or LMR-600 for runs exceeding 5 meters. Keep all connections weather-sealed with butyl tape to prevent moisture from causing a VSWR spike.
Frequency stated in title1300-3000 MHz
Gain stated in title7 dBi
CategoryHorn, Dish, Grid & Log Periodic

Description

LPDP-1330 Dual Polarized LPDA \| 1300-3000 MHz 7 dBi S-Band Antenna is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Gain: 7 dBi.
  • Polarization: Dual (Vertical & Horizontal)
  • Model: LPDP-1330
  • Frequency (manufacturer model field): 1300-3000MHz
  • Bandwidth (manufacturer model field): 1200-3000MHz
  • Gain (manufacturer model field): 7 dBi.
  • Bandwidth: Entire Band
  • Input Impedance: 50 Ohms

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for LPDP-1330 Dual Polarized LPDA \| 1300-3000 MHz 7 dBi S-Band Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of LPDP-1330 Dual Polarized LPDA \| 1300-3000 MHz 7 dBi S-Band Antenna?

Gain: 7 dBi.; Polarization: Dual (Vertical & Horizontal); Model: LPDP-1330; Frequency (manufacturer model field): 1300-3000MHz; Bandwidth (manufacturer model field): 1200-3000MHz; Gain (manufacturer model field): 7 dBi.. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote