Skip to content
LPDP-30-1000 Dual Polarized LPDA \| 30-1000 MHz 8 dBi Tactical Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

LPDP-30-1000 Dual Polarized LPDA \| 30-1000 MHz 8 dBi Tactical Antenna

Updated 2026-11-19 · Markdown version

Model no. LPDP-30-1000

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelLPDP-30-1000
Frequency (manufacturer model field)30-1000MHz
Bandwidth (manufacturer model field)30-1000MHz
Gain (manufacturer model field)5 to 8 dBi.
Frequency Range30 - 1000 MHz.
Gain5 to 8 dBi.
BandwidthEntire Band
PolarizationVertical & Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Beamwidth -3dB.90 +/- 10 Degrees (Horizontal)
Front to Back Ratio14 +/- 2 dB.
VSWR - Equal To or Better Then1:2.5
RF Power Handling Capacity500 Watts
Input Termination2 x N-Female
Lightning ProtectionDC Ground
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating180 Km/Hr.
Overall Length5.1 Meters
Shipping Length2.7 Meters
Support Boom -Material - O.D.AluminumSquare Tube
Elements - Materials- Cross Section - Outer DiameterAluminumRound Tube
Insulator MaterialTeflon & Nylon
Maximum Mount Pipe Diameter50-77 mm (2-3 Inches)
Gross Weight45 Kgs.
Operating Temperature(-) 30 to +75 Degrees Celcius
Storage Temperature(-) 40 to +85 Degrees Celcius
Humidity0 to 95% RH
True Polarization DiversityEquipped with 2 x N-Female input ports, the antenna eliminates "polarization fading" by concurrently processing vertical and horizontal signal components. This is critical for intercepting tactical radios that may be tilted or signals reflecting off complex terrain.
Unloaded EfficiencyTo maintain peak performance, the LPDP-30-1000 uses full-sized radiating elements (up to 2.5 meters) rather than electrical loading techniques. This ensures a consistent 5 to 8 dBi gain and high radiation efficiency across the entire 30-1000 MHz band.
Center-Mount BalanceGiven its significant 45 kg weight and 5-meter wingspan, the antenna features a specialized center-of-gravity mounting arrangement for secure installation on heavy-duty masts (up to 3 inches).
Foldable Tactical ElementsDespite its size, the antenna is designed for manageable logistics. Elements are supplied in two segments and utilize a stainless-steel stud system for rapid assembly. The shipping length is reduced to a compact 2.7 meters.
Integrated ProtectionThe entire array operates at D.C. ground, providing a low-resistance path for lightning protection and suppressing atmospheric static, ensuring a clean noise floor for high-sensitivity surveillance.
Marine-Grade DurabilityAll fasteners, screws, and bolts are made of high-quality stainless steel. The booms are reinforced with extra spacers to withstand wind speeds up to 180 Km/Hr.
Dual-Polarized Cross-Element GeometrySimultaneous capture of E & H polarized signals for zero-loss intercepts.
Massive 30–1000 MHz BandwidthCovers Low-Band VHF, Aviation, UHF, and GSM in one directional unit.
High-Power 500W RatingEngineered for high-duty cycle electronic countermeasures (ECM).
Strategic 5.1-Meter DesignOptimized for low-frequency efficiency without lossy electrical loading.
Direct D.C. GroundingSuperior lightning protection and suppressed noise for SIGINT applications.
Foldable/Removable ElementsSegmented design for streamlined logistics and field setup.
Marine Grade Stainless HardwareResists coastal, industrial, and tropical corrosion.
High Wind RatingBuilt to withstand 180 Km/Hr gusts in permanent base installations.
Balanced Center MountingSecurely fits 50mm to 77mm (2-3 inch) heavy-duty mounting pipes.
Published detailIn the lower frequencies (30–88 MHz), tactical communications rely heavily on vertical whips. However, as these signals travel through dense forests or urban "canyons," they bounce and rotate.
The ProblemA standard vertical antenna can experience a signal drop of up to 20–30 dB if the incoming wave rotates horizontally. In a jamming scenario, this means your interference might not even reach the target's receiver.
The LPDP-30-1000 SolutionBy using both the Vertical and Horizontal ports, you create a "circular-like" reception/transmission field. If the signal fades on the vertical plane, the horizontal elements pick up the slack, ensuring a 100% intercept rate.
Dual-Plane SaturationMany modern high-end radios use diversity antennas to "dodge" jammers. By feeding 500 Watts into both ports of the LPDP-30-1000, you saturate both the E (Electric) and H (Magnetic) planes. This leaves the target radio with no "clean" orientation to receive data.
Directional Power DensityThe 8 dBi gain concentrates that 500W into a 85-degree floodlight. This dramatically increases the Jamming-to-Signal (J/S) ratio compared to an omnidirectional antenna, allowing you to jam targets at significantly greater distances.
Vertical DominanceConfirms mobile tactical units, maritime vessels, or standard ground-based infantry whips.
Horizontal DominanceIndicates fixed-site point-to-point relays, TV/Broadcast backup links, or specialized NVIS-style VHF links.
Rapid Polarization ShiftingA signal that rapidly moves between V and H ports often identifies a moving vehicle or aircraft as the signal bounces off changing terrain.
The 14 dB ShieldThe LPDP-30-1000 radiates 14 dB less energy out of the back than the front. This allows your EW team to operate their own Command & Control (C2) equipment directly behind the antenna without being blinded by their own jammer.
Feeder ManagementUse high-quality, phase-matched LMR-600 or 1/2" corrugated cables. At 1000 MHz, cable loss is your biggest enemy; keep runs as short as possible to ensure all 500W reaches the elements.
Mast StabilityDue to the 5-meter width and 45 kg weight, use a heavy-duty 77mm (3-inch) steel or reinforced aluminum mast. Ensure the center-mount clamp is torqued correctly to prevent "spinning" in high winds.
Grounding for Noise FloorEnsure the mast is grounded. The D.C. Grounded design of the LPDP-30-1000 is only effective if it has a low-resistance path to earth to bleed off the atmospheric static that can drown out weak SIGINT signals.
Visual StealthThe Olive Green finish provides low visual contrast. When deploying in the field, ensure the 5.1-meter profile is broken up by natural vegetation or camouflage netting, as a log-periodic of this size is a high-value target for visual reconnaissance.
Frequency stated in title30-1000 MHz
Gain stated in title8 dBi
CategoryHorn, Dish, Grid & Log Periodic

Description

LPDP-30-1000 Dual Polarized LPDA \| 30-1000 MHz 8 dBi Tactical Antenna is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Frequency Range: 30 – 1000 MHz.
  • Gain: 5 to 8 dBi.
  • Polarization: Vertical & Horizontal
  • Model: LPDP-30-1000
  • Frequency (manufacturer model field): 30-1000MHz
  • Bandwidth (manufacturer model field): 30-1000MHz
  • Gain (manufacturer model field): 5 to 8 dBi.
  • Bandwidth: Entire Band

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for LPDP-30-1000 Dual Polarized LPDA \| 30-1000 MHz 8 dBi Tactical Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of LPDP-30-1000 Dual Polarized LPDA \| 30-1000 MHz 8 dBi Tactical Antenna?

Frequency Range: 30 - 1000 MHz.; Gain: 5 to 8 dBi.; Polarization: Vertical & Horizontal; Model: LPDP-30-1000; Frequency (manufacturer model field): 30-1000MHz; Bandwidth (manufacturer model field): 30-1000MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote