Skip to content
BVM-100-1000 High-Power VHF/UHF Military Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Radio Communications › VHF, UHF & General-Purpose Antennas

BVM-100-1000 High-Power VHF/UHF Military Antenna

Updated 2026-11-19 · Markdown version

Model no. BVM-100-1000

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelBVM-100-1000
Frequency (manufacturer model field)100-1000MHz
Bandwidth (manufacturer model field)100-1000MHz
Gain (manufacturer model field)2 dBi.
Frequency Range100 - 1000 MHz.
Gain2 to 0dBi.
BandwidthEntire Band
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
Beamwidth -3dB.76 Degrees (Vertical)
VSWR - Equal To or Better Then1:2.5
RF Power Handling Capacity500 Watts
Input TerminationN-Female
Antenna MaterialsAll Aluminum
Mounting Hardware -MaterialsStainless Steel
Wind Rating180 Km/Hr.
Overall Length1.3 Meters
Shipping Length1.3 Meters
Support Pipe O.D.38 mm
Maximum Mount Pipe Diameter51 mm (2 Inches)
Radome MaterialUV Resistant ABS
Radome Outer Diameter160 mm
Radome Length1200 mm
Gross Weight10 Kgs.
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH
Published detailThe BVM-100-1000 utilizes specialized impedance matching techniques to maintain a smooth VSWR (better than 2.8:1) across its entire range.
Ultra-Wideband DominanceContinuous operation from 100 MHz to 1000 MHz, spanning the entire VHF/UHF tactical spectrum.
High RF Power CapacityEngineered to handle up to 500 Watts, ideal for high-power jamming and mission-critical transmissions.
Ground Independent TechnologyDelivers consistent 2 dBi gain on any platform without the need for a metallic ground plane.
MIL-STD-810G CompliantRigorously tested for shock, vibration, rain, fungus resistance, and salt fog survivability.
Superior Material BuildFeatures an all-aluminum internal structure and marine-grade stainless steel mounting hardware.
NATO Standard IntegrationSupplied with a standard NATO 4-hole pattern for universal vehicular mounting.
Ruggedized ABS RadomeHigh-strength, RF-transparent enclosure designed for low wind loading and high-impact protection.
Weatherproof N-Female TerminationConnector and feed cable are fully enclosed inside the mounting pipe for total shielding.
Wide Vertical Beamwidth78-degree vertical arc ensures reliable connectivity during vehicular movement and banking.
Zero Field MaintenanceArrives factory-calibrated for "plug-and-play" readiness; no field tuning or adjustments required.
The High-Power AdvantageMost vehicular antennas are limited to 50–100W. The BVM-100-1000’s 500W capacity allows you to flood the spectrum with 5x to 10x more energy. This significantly increases the jamming radius, providing a larger "bubble" of protection for convoys moving through high-threat areas.
Thermal StabilityRadiating 500W generates significant internal heat. The BVM-100-1000 uses a high-class aluminum alloy internal structure that acts as a heat sink, ensuring the antenna doesn't "de-tune" or suffer structural failure during long-duration jamming missions.
The 78° Vertical ArcWhile many high-gain antennas "flatten" the signal toward the horizon, the BVM-100-1000 maintains a 78-degree vertical beamwidth. This ensures that your 500W of jamming power is distributed in a wide vertical arc. Whether a trigger man is on a 5th-floor balcony or at street level, they remain within the effective jamming envelope.
The Stability FactorBecause the BVM-100-1000 is ground independent, its 2 dBi gain and VSWR remain stable even if the antenna is mounted on a non-metallic bracket or near the edge of a vehicle. This consistency is vital for "Barrage Jamming," where any dip in antenna performance could create a "frequency leak" that an adversary could exploit.
Published detailThe 100–1000 MHz range covers the most common RCIED triggers, including:
VHF High (136–174 MHz)Handheld "Walkie-Talkies."
UHF (400–470 MHz)Commercial LMR and private mobile radios.
Published detail900 MHz Band: Older GSM cellular phones and industrial remote controls.
The Integrated BenefitBy using one antenna to cover all these threats, you reduce the Mutual Coupling (interference between antennas) that often plagues vehicles with multiple "whip" antennas. This ensures your jammer is operating at peak efficiency across the entire band.
Cable SelectionAt 500W, standard RG-58 cable will melt. You must use high-power, low-loss coaxial cables (such as LMR-400 or LMR-600) to ensure the power reaches the antenna without being lost as heat in the cable.
Connector IntegrityEnsure the N-Female connection at the NATO base is perfectly clean and tight. At high power, even a small amount of resistance or moisture can cause "arcing," which can destroy both the connector and the jammer’s power amplifier.
Personnel Safety500W of RF energy is hazardous to humans at close range. Ensure the antenna is mounted as high as possible and maintain a minimum "Keep Out" distance (typically 2–3 meters) from personnel while the jammer is active.
MIL-STD-810G MaintenanceWhile the UV-resistant ABS radome is extremely tough, check for cracks after heavy combat or off-road use. A cracked radome can allow moisture to enter the high-power elements, leading to internal arcing during transmission.
CategoryVHF, UHF & General-Purpose Antennas

Description

BVM-100-1000 High-Power VHF/UHF Military Antenna is part of our vhf, uhf & general-purpose antennas range (Radio Communications).

Key details

  • Frequency Range: 100 – 1000 MHz.
  • Gain: 2 to 0dBi.
  • Polarization: Vertical
  • Model: BVM-100-1000
  • Frequency (manufacturer model field): 100-1000MHz
  • Bandwidth (manufacturer model field): 100-1000MHz
  • Gain (manufacturer model field): 2 dBi.
  • Bandwidth: Entire Band

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for BVM-100-1000 High-Power VHF/UHF Military Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of BVM-100-1000 High-Power VHF/UHF Military Antenna?

Frequency Range: 100 - 1000 MHz.; Gain: 2 to 0dBi.; Polarization: Vertical; Model: BVM-100-1000; Frequency (manufacturer model field): 100-1000MHz; Bandwidth (manufacturer model field): 100-1000MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other vhf, uhf & general-purpose antennas are available?

The VHF, UHF & General-Purpose Antennas category lists 2,321 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/radio-communications/vhf-uhf-and-general-purpose-antennas/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote