Skip to content
HFCM-4-30 HF Conical Monopole Antenna \| 4-30 MHz Strategic 15m Omni
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Radio Communications › VHF, UHF & General-Purpose Antennas

HFCM-4-30 HF Conical Monopole Antenna \| 4-30 MHz Strategic 15m Omni

Updated 2026-11-19 · Markdown version

Model no. HFCM-4-30

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelHFCM-4-30
Frequency (manufacturer model field)4-30MHz
Bandwidth (manufacturer model field)4-30MHz
Gain (manufacturer model field)5 dBi
Frequency Range4-30 MHz
Gain5 dBi
Bandwidth4-30MHz
Antenna TypeConical
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
VSWR - Equal To or Better Then3:1
RF Power Handling Capacity1 KW with N-F, 10KW with 1-5/8” EIA
Input TerminationN-Female or DIN-Female or 1-5/8” EIA
Antenna MaterialsAluminum & Stainless Steel
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length15 Meters
Shipping Length3.0 Meters
Radiating MaterialUltra Corrosion Resistant Stainless Steel
Gross Weight100 Kgs
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH
Elite 4–30 MHz Broadband PerformanceSeamlessly covers the entire HF spectrum without the need for ATUs or resistors.
Optimized 4 MHz NVIS Reach15m height provides the vertical radiation intensity needed for reliable regional nighttime links.
Massive 10 KW Continuous Power HandlingRobust electrical design supports strategic high-traffic broadcast and data links.
Stainless Steel Radiator CurtainPrecision-welded high-conductivity wire ensures total survivability in salt-fog and industrial zones.
Modular 6063T6 Aluminum MastPowder-coated for weather protection and rated for wind speeds up to 200 Km/Hr.
Type 316 Marine Grade FastenersAll mounting hardware is engineered to prevent PIM and electro-chemical corrosion.
Ceramic Insulator TechnologyProvides superior high-voltage isolation, essential for 10kW operation in humid environments.
Rapid Deployment LogisticsDismantled kit form with 3m sections allows for easy field assembly with simple hand tools.
Published detailThe 4 MHz band is essential for regional communication (0–500 km) during solar minimums or nighttime when the upper ionosphere layers disappear.
The 15-Meter ApertureAt 4 MHz, the wavelength is 75 meters. A 15-meter mast provides a significant percentage of a quarter-wavelength, ensuring that the antenna radiates a high-intensity signal at the steep angles (70°–90°) required for NVIS.
Reliable "Umbrella" CoverageThis high-angle radiation allows the signal to hit the ionosphere and "rain" down over a wide regional area, overcoming terrain obstacles like mountains or dense jungle that would block ground-wave signals.
Published detailA vertical monopole is only as good as its ground plane. At 4 MHz, the "return currents" in the soil travel deep and wide.
VSWR StabilityThis expansive ground screen ensures that the 3:1 VSWR remains stable regardless of whether the site is located on dry desert sand, rocky plateaus, or permafrost. It effectively "divorces" the antenna's performance from the local geology.
Published detailWhile optimized for 4 MHz, the HFCM-4-30 remains an elite performer at the higher end of the HF band (20–30 MHz).
Low-Angle "Take-Off"At higher frequencies, the antenna’s radiation pattern naturally compresses toward the horizon. This low-angle launch is the key to inter-continental "skip," allowing your signal to travel 3,000+ km in a single hop.
ALE & Frequency HoppingBecause the antenna is inherently broadband, it is perfectly suited for Automatic Link Establishment (ALE). It can scan from 4 MHz to 30 MHz in milliseconds, finding the best propagation path without waiting for a slow mechanical tuner to hunt for a match.
No-Tuner ReliabilityBy eliminating the Antenna Tuning Unit (ATU), you remove the most common point of failure in high-power HF systems. Your 10,000-watt signal is fed directly into the stainless steel radiator curtain.
High-Voltage IntegrityThe use of high-strength ceramic and nylon insulators ensures that the massive RF voltages at the base of the 15-meter mast do not "flash over," even in torrential rain or high-humidity tropical environments.
Radial AlignmentFor a perfectly symmetrical 360-degree pattern, all 64 ground radials must be pulled tight and spaced exactly 5.6 degrees apart. In permanent strategic sites, these should be buried to protect them from wildlife and weather.
Foundation IntegrityA 15-meter mast acts as a massive lever in the wind. The foundation and guy-wire anchors must be installed to strict engineering tolerances to survive 200 Km/Hr gusts.
RF Safety PerimeterAt 10kW, the RF field at the base of a 15-meter antenna is significant. A non-metallic safety fence should be installed around the 18-meter radius of the earth mat to prevent personnel from entering the high-intensity radiation zone during transmission.
MaintenancePeriodically inspect the 316 stainless steel fasteners and guy-wire tensions. At this height, mechanical stability is directly tied to electrical performance and safety.
Frequency stated in title4-30 MHz
CategoryVHF, UHF & General-Purpose Antennas

Description

HFCM-4-30 HF Conical Monopole Antenna \| 4-30 MHz Strategic 15m Omni is part of our vhf, uhf & general-purpose antennas range (Radio Communications).

Key details

  • Frequency Range: 4-30 MHz
  • Gain: 5 dBi
  • Polarization: Vertical
  • Model: HFCM-4-30
  • Frequency (manufacturer model field): 4-30MHz
  • Bandwidth (manufacturer model field): 4-30MHz
  • Gain (manufacturer model field): 5 dBi
  • Bandwidth: 4-30MHz

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for HFCM-4-30 HF Conical Monopole Antenna \| 4-30 MHz Strategic 15m Omni?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of HFCM-4-30 HF Conical Monopole Antenna \| 4-30 MHz Strategic 15m Omni?

Frequency Range: 4-30 MHz; Gain: 5 dBi; Polarization: Vertical; Model: HFCM-4-30; Frequency (manufacturer model field): 4-30MHz; Bandwidth (manufacturer model field): 4-30MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other vhf, uhf & general-purpose antennas are available?

The VHF, UHF & General-Purpose Antennas category lists 2,321 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/radio-communications/vhf-uhf-and-general-purpose-antennas/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote