Skip to content
AP-2330-32 2.4-Meter Microwave Grid Parabolic Antenna \| 2305-2360 MHz \| 32 dBi
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Specialty & RF Designs › Horn, Dish, Grid & Log Periodic

AP-2330-32 2.4-Meter Microwave Grid Parabolic Antenna \| 2305-2360 MHz \| 32 dBi

Updated 2026-11-19 · Markdown version

Model no. AP-2330-32

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelAP-2330-32
Frequency (manufacturer model field)2305-2360MHz
Bandwidth (manufacturer model field)55MHz
Gain (manufacturer model field)32 dBi
Frequency Range2305-2360 MHz
Gain32 dBi
Bandwidth55 MHz
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Beamwidth -3dB.3.7 Degrees (E&H)
Front to Back Ratio40 dB.
Cross Polarization36 dB.
VSWR - Equal To or Better Then< 1.3:1
RF Power Handling Capacity150 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Support Pipe O.D.51 mm (2 Inches)
Support Pipe Material6063T6 Aluminum Alloy
Diameter of Parabolic Reflector2.4 Meters
Radiating MaterialHigh Quality Brass
Maximum Mount Pipe Diameter110 mm (4 Inches)
Gross Weight65 Kgs.
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH
Exceptional Link MarginDelivers a mid-band gain of 32 dBi. This high gain allows for the establishment of "backbone" long-distance terrestrial links, effectively bridging gaps between remote sites where standard antennas cannot maintain a reliable connection.
Ultra-Narrow FocusFeatures a razor-sharp 3.7-degree beam-width at half-power points. This clinical precision maximizes link security and provides high immunity to interference from adjacent signal sources.
Advanced Signal Isolation* Front-to-Back Ratio: 40 dB, ensuring the antenna is nearly blind to noise and signals originating from behind the station.Cross-Polarized Discrimination: 36 dB, critical for maintaining the high signal-to-noise ratio (SNR) required for sophisticated digital modulation.
Cross-Polarized Discrimination36 dB, critical for maintaining the high signal-to-noise ratio (SNR) required for sophisticated digital modulation.
High-Efficiency Feed SystemThe antenna dipole feed uses an Air-Cored transmission line with a primary feed horn. Radiating elements are made of high-quality brass to ensure maximum conductivity and negligible internal loss.
Stable ImpedanceMaintains a VSWR of better than 1.3:1 across the entire bandwidth, ensuring optimal power transfer and protecting connected radio equipment.
Lightning ProtectionOperates at direct D.C. ground with a low-resistance discharge path, shielding the system from atmospheric static and lightning-induced transients.
Reflector ArchitectureThe 2.4-meter (8-foot) diameter grid reflector is constructed from 6063T6 architectural-grade anodized aluminum alloy. The open grid design (12.7 mm members) drastically reduces the "sail effect" and torque on the tower compared to solid dishes.
Precision Tracking & AlignmentElevation Tracking: Integrated mechanism allowing for fine +/- 10 degree adjustments. This is essential for "dialing in" peak signal strength on long-distance hops after the antenna is mounted.Versatile Polarization: The mounting arrangement permits a 90-degree rotation to switch between Horizontal and Vertical polarization in the field.
Elevation TrackingIntegrated mechanism allowing for fine +/- 10 degree adjustments. This is essential for "dialing in" peak signal strength on long-distance hops after the antenna is mounted.
Versatile PolarizationThe mounting arrangement permits a 90-degree rotation to switch between Horizontal and Vertical polarization in the field.
Dual Side StrutsSupplied with two support arms to provide extra rigidity to the assembly, ensuring the beam stays on-target during high-wind events.
Marine-Grade HardwareAll screws, nuts, and bolts are manufactured from Type 316 Stainless Steel to prevent galvanic corrosion.
Protected FeedThe sensitive dipole feed is completely sealed inside a high-impact ABS radome for all-weather protection.
Heavy-Duty MountingDesigned for large-diameter vertical masts up to 110 mm (4 inches).
Hurricane ResilienceThe grid design allows for a wind rating of 200 Km/Hr (125 MPH). The open-frame architecture significantly lowers the structural demand on masts.
Extreme Thermal WindowOperational in temperature ranges from -30°C to +70°C and storage-rated from -40°C to +80°C.
Corrosive Theater ProtectionThe combination of anodized aluminum, stainless steel hardware, and an anti-corrosive Army Green powder coating ensures decades of service life in coastal and tropical climates.
High Humidity ToleranceCertified for operation in 0 to 95% RH environments without performance drift or internal oxidation.
Standard100% in compliance with FCC Part 101.115.
Cross-Polarization DiscriminationStrictly adheres to mandated isolation levels (36 dB) to prevent interference between vertical and horizontal channels.
Pattern EnvelopeMeets the required Front-to-Back ratio (40 dB) and beam-width specifications, ensuring spectral efficiency and preventing unwanted signal radiation into adjacent regions.
Elite Link MarginThe primary advantage is its massive 32 dBi gain. This provides the necessary power to establish ultra-long-distance point-to-point hops, effectively bridging gaps between remote tactical sites or regional infrastructure hubs.
Razor-Sharp DirectivityWith a 3.7-degree beam-width, the antenna focuses RF energy with clinical precision. This not only maximizes signal reach but also ensures the link is inherently secure and highly resistant to interception or interference from adjacent signals.
Superior Signal IsolationFeaturing a 40 dB Front-to-Back ratio, the AP-2330-32 is nearly "blind" to noise and signals originating from behind the station. Combined with 36 dB cross-polarized discrimination, it provides the high signal-to-noise ratio (SNR) required for sophisticated digital data streams.
Low Wind LoadingUnlike solid parabolic dishes of this size, the grid architecture allows wind to pass through the reflector. This significantly reduces the "sail effect" and torque on the tower, allowing an 8-foot dish to be safely mounted in environments where a solid dish would be structurally impossible.
Dynamic AlignmentThe integrated elevation tracking mechanism (+/- 10 degrees) allows for extensive fine-tuning after the antenna is mounted. This is critical for optimizing links across uneven terrain or across long distances where atmospheric refraction can impact signal alignment.
Infrastructure OptimizationBy enabling longer-distance hops with higher stability, the AP-2330-32 can reduce the total number of relay towers required for a cross-country link, lowering both capital and maintenance expenditures.
Professional Regulatory ComplianceBeing 100% FCC Part 101.115 compliant, this antenna meets the strict standards required for high-capacity directional communication in the United States and other strictly regulated markets.
Theater-Hardened ResilienceConstructed from anodized 6063T6 aluminum with 316 stainless steel fasteners, the antenna is immune to salt fog and high humidity. The ABS-enclosed feed ensures that sensitive radiating elements never come into contact with corrosive environmental factors.
Structural ReliabilityThe inclusion of dual side struts as standard equipment ensures the antenna maintains its precise alignment and parabolic shape even during high-vibration or severe weather events.
Published detail3. WCS Band Infrastructure: Optimized specifically for Wireless Communications Service (WCS) applications in the 2.3 GHz range, providing the high gain and low noise floor required for professional data delivery.
Frequency stated in title2305-2360 MHz
Gain stated in title32 dBi
CategoryHorn, Dish, Grid & Log Periodic

Technical parameters

FeatureSpecificationTactical Benefit
Gain32 dBiUltimate link margin for extreme-distance hops.
Beam-width3.7 DegreesRazor-sharp precision; maximum interference rejection.
Wind Rating200 Km/HrStays operational in hurricane-force conditions.
Tracking+/- 10° ElevationEnables perfect signal optimization in the field.
StabilityDual Side StrutsPrevents beam-shift during severe weather.

Description

AP-2330-32 2.4-Meter Microwave Grid Parabolic Antenna \| 2305-2360 MHz \| 32 dBi is part of our horn, dish, grid & log periodic range (Specialty & RF Designs).

Key details

  • Frequency Range: 2305-2360 MHz
  • Gain: 32 dBi
  • Polarization: Vertical or Horizontal
  • Model: AP-2330-32
  • Frequency (manufacturer model field): 2305-2360MHz
  • Bandwidth (manufacturer model field): 55MHz
  • Gain (manufacturer model field): 32 dBi
  • Bandwidth: 55 MHz

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for AP-2330-32 2.4-Meter Microwave Grid Parabolic Antenna \| 2305-2360 MHz \| 32 dBi?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of AP-2330-32 2.4-Meter Microwave Grid Parabolic Antenna \| 2305-2360 MHz \| 32 dBi?

Frequency Range: 2305-2360 MHz; Gain: 32 dBi; Polarization: Vertical or Horizontal; Model: AP-2330-32; Frequency (manufacturer model field): 2305-2360MHz; Bandwidth (manufacturer model field): 55MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other horn, dish, grid & log periodic are available?

The Horn, Dish, Grid & Log Periodic category lists 148 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/specialty-and-rf-designs/horn-dish-grid-and-log-periodic/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote