The AW-PA7090-X2x15B65 is a 698-960 MHz directional panel antenna engineered for 4g / 5g base-station coverage. It delivers 2×15 dBi of gain with dual ±45° slant polarization, making it a dependable choice where consistent 698-960 MHz performance is required.
Radiation Pattern and Gain
The half-power beamwidth is approximately 65 degrees in azimuth by 15 degrees in elevation, concentrating radiated energy toward the intended service area and improving signal-to-noise ratio at the cell edge. The rated gain of 2×15 dBi is referenced to an isotropic radiator.
Mechanical and Electrical Specifications
Mechanically, the AW-PA7090-X2x15B65 measures 1360 x 280 x 80 mm and is housed in a ASA / fiberglass radome. The standard interface is a N-Female connector, with a nominal impedance of 50 ohms and a typical VSWR of 1.5:1 or better. The element withstands up to 100 W of input power.
Installation Guidance
The recommended installation is outdoor, pole-mounted. The enclosure carries an IP65 environmental rating for outdoor exposure. For best results, mount the antenna with clear line of sight to the served area and bond all outdoor hardware to a proper grounding system.
Typical Applications
4G / 5G Base-Station Coverage
Fixed Wireless Broadband
Public Safety / Land Mobile Radio
Request a Quote
Need this antenna with a custom connector, cable length, or radome color? Use the antenna configurator to confirm the specification and submit an inquiry for AW-PA7090-X2x15B65.
Advanced filters (dimension limits)
Frequently Asked Questions
What is a directional panel antenna used for?
Sector / panel antennas delivering focused gain over a defined azimuth, used for base-station sectorization and fixed point-to-multipoint links.
Is AW-PA7090-X2x15B65 suitable for 4g / 5g base-station coverage?
Yes. AW-PA7090-X2x15B65 is well matched to 4g / 5g base-station coverage deployments, where its radiation pattern and gain provide reliable coverage and link margin.
Can the connector on AW-PA7090-X2x15B65 be changed?
Yes. The default RF interface can be supplied as SMA, N-type, TNC, or other connectors on request, and custom cable assemblies are available. Specify your interface in the inquiry form.
What is the standard impedance and VSWR of AW-PA7090-X2x15B65?
The nominal impedance is 50 ohms with a typical VSWR of 1.5:1 or better across the operating band. A 75 ohm option can be quoted for broadcast applications.
How do I request a quote for AW-PA7090-X2x15B65?
Use the antenna configurator on this page to confirm the specification, then submit the inquiry form. An engineer from astronwireless.com will respond within one business day.
Accessories & Components
Complete your installation with matched RF cables, connectors, mounts, adapters and bulk coaxial cable. Custom assemblies, lengths and interfaces are available on request.
