AW-MG2400-3 2.4-2.5 GHz Magnetic-Base Mobile Antenna (3 dBi)
2.4-2.5 GHz magnetic-base mobile antenna — 3 dBi gain, vertical polarization, SMA-Male connector.
AW-MG2400-3 specifications
Model
AW-MG2400-3
Frequency Range
2400–2500 MHz
Gain
3 dBi
Polarization
Vertical
Half-Power Beamwidth
360° (H) × 55° (V)
Dimensions
160 × 30 × 30 mm
Connector
SMA-Male
Impedance
50 Ω
VSWR
≤ 1.5:1
Power Handling
25 W
Ingress Protection
IP65
Material / Radome
Magnetic base / TPE whip
Operating across 2.4-2.5 GHz, the AW-MG2400-3 magnetic-base mobile antenna provides 3 dBi gain and vertical polarization. The design targets telematics / v2x deployments that demand reliable coverage and stable impedance matching.
Radiation Pattern and Gain
As an omnidirectional radiator, it provides a full 360 degree azimuth pattern with an approximate 55 degree elevation beamwidth, distributing energy evenly around the mast. The rated gain of 3 dBi is referenced to an isotropic radiator.
Mechanical and Electrical Specifications
Mechanically, the AW-MG2400-3 measures 160 x 30 x 30 mm and is housed in a Magnetic base / TPE whip. The standard interface is a SMA-Male connector, with a nominal impedance of 50 ohms and a typical VSWR of 1.5:1 or better. The element withstands up to 25 W of input power.
Installation Guidance
The recommended installation is vehicle, magnetic. The enclosure carries an IP65 environmental rating for outdoor exposure. For best results, mount the antenna with clear line of sight to the served area and bond all outdoor hardware to a proper grounding system.
Typical Applications
Telematics / V2X
Vehicle-Mounted
IoT / M2M
Request a Quote
Need this antenna with a custom connector, cable length, or radome color? Use the antenna configurator to confirm the specification and submit an inquiry for AW-MG2400-3.
Advanced filters (dimension limits)
Frequently Asked Questions
What is a magnetic-base mobile antenna used for?
Magnetic-mount vehicular antennas for telematics and mobile connectivity.
Is AW-MG2400-3 suitable for telematics / v2x?
Yes. AW-MG2400-3 is well matched to telematics / v2x deployments, where its radiation pattern and gain provide reliable coverage and link margin.
Can the connector on AW-MG2400-3 be changed?
Yes. The default RF interface can be supplied as SMA, N-type, TNC, or other connectors on request, and custom cable assemblies are available. Specify your interface in the inquiry form.
What is the standard impedance and VSWR of AW-MG2400-3?
The nominal impedance is 50 ohms with a typical VSWR of 1.5:1 or better across the operating band. A 75 ohm option can be quoted for broadcast applications.
How do I request a quote for AW-MG2400-3?
Use the antenna configurator on this page to confirm the specification, then submit the inquiry form. An engineer from astronwireless.com will respond within one business day.
Accessories & Components
Complete your installation with matched RF cables, connectors, mounts, adapters and bulk coaxial cable. Custom assemblies, lengths and interfaces are available on request.
