| Model | SD9-150 |
| Frequency (manufacturer model field) | 135-175 MHz |
| Bandwidth (manufacturer model field) | 15 MHz. |
| Gain (manufacturer model field) | 9 dBd |
| Frequency Range | 135-175 MHz |
| Gain | 9 dBd |
| Bandwidth | 15 MHz. |
| Polarization | Vertical |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Omni-directional |
| Beamwidth -3dB. | 9 Degrees (Vertical) |
| VSWR - Equal To or Better Then | 1:1.5 |
| RF Power Handling Capacity | 500 Watts |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Antenna Materials | 6063T6 Aluminum |
| Mounting Hardware -Materials | Stainless Steel |
| Wind Rating | 180 Kh/Hr. |
| Overall Length | 12 Meters |
| Shipping Length | 3 Meters |
| Support Boom -Material - O.D. | Aluminum51 mm |
| Elements - Materials- Cross Section - Outer Diameter | Aluminum12.7 mm |
| Maximum Mount Pipe Diameter | 51mm (2 Inches) |
| Gross Weight | 45 Kgs. |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Elite Gain Performance | Delivers a consistent 9 dBd (11.1 dBi) gain in an omni-directional configuration. This allows for massive signal penetration over vast geographical areas, overcoming path loss in rural or mountainous terrain. |
| Vertical Beam Precision | Features a razor-sharp 9-degree vertical beam-width. By concentrating RF energy toward the horizon and away from the sky or the ground immediately beneath the tower, the antenna maximizes "long-haul" reach. |
| Field-Adjustable Pattern | Omni-Directional: Arranging dipoles around the mast provides $360^{\circ}$ coverage.Offset Directional: Aligning dipoles collinearly provides 12 dBd (14.1 dBi) gain, focusing energy toward a specific sector. |
| Omni-Directional | Arranging dipoles around the mast provides $360^{\circ}$ coverage. |
| Offset Directional | Aligning dipoles collinearly provides 12 dBd (14.1 dBi) gain, focusing energy toward a specific sector. |
| Phasing Integrity | Utilizes a specialized center-fed phasing harness. This ensures that all eight dipoles receive an equal and in-phase signal, preventing pattern distortion and maintaining peak gain across its 10 MHz bandwidth. |
| Null-Fill Engineering | Designed to provide consistent coverage even in the "null" zones that typically occur close to the base of high-gain antennas, ensuring near-field users are not "overshot" by the signal. |
| Massive Structural Aperture | The 12-meter (39.3-foot) overall length provides a large capture area for receiving weak signals while offering a high-profile transmission platform. |
| Logistical Sectional Design | The central mast is manufactured in four interlocking 3-meter sections. This allows a nearly 40-foot antenna to be shipped via standard freight and transported to remote mountain-top sites where a single-piece mast would be impossible to deliver. |
| Industrial-Grade Materials | Radiators: Folded dipoles are constructed from 12.7 mm high-strength aluminum tubing.Support Mast: Features a heavy-duty 51 mm outer diameter 6063T6 aluminum framework. |
| Radiators | Folded dipoles are constructed from 12.7 mm high-strength aluminum tubing. |
| Support Mast | Features a heavy-duty 51 mm outer diameter 6063T6 aluminum framework. |
| Weather Sealing | The dipole ends and cable connections are sealed in high-impact epoxy, providing structural rigidity and preventing internal oxidation. |
| Elite Hardware | All mounting fasteners and brackets are made of Marine Grade Stainless Steel, ensuring the array can be serviced or adjusted even after years of exposure to the elements. |
| Hurricane Resilience | Despite its extreme height, the narrow profile of the dipoles and the strength of the 6063T6 aluminum mast provide a wind rating of 180 Km/Hr (112 MPH). |
| Integrated Lightning Protection | The entire antenna structure operates at direct D.C. ground. The aluminum tubular boom provides a low-resistance path to discharge lightning strikes directly to the tower ground, shielding the connected radio equipment. |
| Waterproofing | The RF input (N-Female termination) is protected by flame-retardant heat-shrinking tubing, creating a hermetic seal against driving rain and ice. |
| Extreme Thermal Window | Operational: -30°C to +70°C.Humidity: Rated for 0 to 95% RH, making it suitable for both arid desert and humid tropical environments. |
| Operational | -30°C to +70°C. |
| Humidity | Rated for 0 to 95% RH, making it suitable for both arid desert and humid tropical environments. |
| Strategic Pattern Versatility | The primary advantage is the ability to shift between a 9 dBd omni-directional pattern for $360^{\circ}$ regional coverage and a 12 dBd offset pattern for targeted sector coverage. This allows the antenna to adapt to changing network requirements without a complete hardware replacement. |
| Elite Vertical Directivity | With a razor-sharp 9-degree vertical beam-width, the antenna focuses RF energy toward the horizon. This minimizes "sky-waste" and ground-reflection interference, ensuring the maximum possible link distance for a terrestrial VHF system. |
| Null-Fill Coverage | Unlike many high-gain antennas that suffer from signal "dead zones" directly beneath the tower, the SD9-150 is engineered with null-fill characteristics to ensure consistent signal strength for users located in the near-field. |
| Low-Noise Performance | Designed for highly populated radio sites, the array maintains a stable VSWR (1.5:1) and low-noise profile, which is critical when multiple transmitters and receivers are co-located on the same tower. |
| High Power Reserve | Rated for 500 Watts, this antenna can easily handle high-power paging transmitters or multiple combined repeater channels simultaneously. |
| Reduced Infrastructure Density | By providing 9–12 dBd of gain, the SD9-150 allows for longer-distance hops. This can reduce the total number of repeater sites required to cover a specific geographic region, lowering both CAPEX and ongoing land-lease costs. |
| Logistical Efficiency | Despite its 12-meter height, the four-section mast design allows for significantly lower shipping costs and the ability to transport the antenna to remote mountain-top sites using standard vehicles or small trailers. |
| Theater-Hardened Resilience | Constructed from anodized 6063T6 aluminum with 316 stainless steel fasteners, the antenna is immune to salt fog and high humidity. The epoxy-sealed connections ensure the structure survives decades in harsh coastal or industrial climates. |
| Equipment Protection | The direct D.C. ground operation acts as a built-in lightning rod, providing a dedicated discharge path that safeguards expensive base station electronics from catastrophic electrical surges. |
| Frequency stated in title | 136-174 MHz |
| Gain stated in title | 9dBd, 12dBd |
| Category | VHF, UHF & General-Purpose Antennas |