Skip to content
SD3-400 Stacked Dipole Array \| 380-420 MHz TETRA Base Station Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Radio Communications › VHF, UHF & General-Purpose Antennas

SD3-400 Stacked Dipole Array \| 380-420 MHz TETRA Base Station Antenna

Updated 2026-11-19 · Markdown version

Model no. SD3-400

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelSD3-400
Frequency (manufacturer model field)380-420MHz
Bandwidth (manufacturer model field)380-420MHz
Gain (manufacturer model field)3 dBd.
Frequency Range380-420 MHz
Gain3 dBd.
Bandwidth40 MHz.
Antenna TypeDipoles
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
VSWR - Equal To or Better Then1:1.5
RF Power Handling Capacity500 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground
Antenna Materials6063T6 Aluminum
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length1.6 Meters
Shipping Length1.6 Meters
Support Pipe O.D.51 mm
Support Pipe MaterialAluminum Tube
Maximum Mount Pipe Diameter51 mm ( 2 Inches)
Gross Weight5 kgs
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH
Dual-Pattern FlexibilityConfigurable for 3 dBd Omni-directional or 6 dBd Offset radiation patterns to suit specific site geographic needs.
Optimized 380–420 MHz BandwidthMaintains consistent gain and low VSWR across the entire 40 MHz TETRA spectrum.
Extreme 500W Power CapacityEngineered for high-duty cycle transmissions in base station, repeater, and paging roles.
Molded Phasing HarnessIntegrated molded splitters minimize signal loss and provide superior waterproofing over traditional connectors.
Architectural Aluminum Alloy6063T6 anodized aluminum construction offers ultra-corrosion resistance and long-term structural rigidity.
Integrated Lightning ProtectionD.C. ground design shunts atmospheric discharges safely through the high-strength aluminum boom.
Marine Grade 316 Stainless SteelAll hardware is corrosion-resistant, making it perfect for coastal and high-humidity deployments.
Compact 1.6-Meter ProfileEasy to ship and install in either assembled or dismantled conditions based on logistical requirements.
Low Noise PerformancePrecision-fed design ensures high-fidelity signal distribution for multi-channel communication systems.
Best ForCentrally located base stations in urban areas or industrial campuses where users are scattered in all directions (360-degree coverage).
The 3 dBd AdvantageBy spreading the energy evenly, you ensure no "blind spots" exist within the local network. The vertical stacking of two elements provides a generous 36-degree vertical beamwidth, making it very forgiving for communicating with handhelds in hilly terrain or multi-story buildings.
Best ForCorridor coverage (highways or railways), coastal sites looking inland, or "edge-of-network" base stations that need to push signals deep into a specific sector.
The 6 dBd AdvantageThis configuration yields an additional 3 dB of gain over the omni pattern—effectively doubling the perceived signal strength in the favored direction. It creates a broad forward lobe that covers roughly 180 degrees horizontally while significantly suppressing radiation to the rear.
In-Phase DistributionThe SD3-400 harness ensures that the RF signal reaches both dipoles at the exact same microsecond. This forces the two individual waves to merge into a single, stable wave front that stays parallel to the ground.
Molded ReliabilityBecause the power splitters are molded and sealed, there are no internal connectors to vibrate loose or allow moisture ingress. This is critical for preventing "static crashes" and signal degradation in harsh weather.
Lightning PathEvery dipole is directly clamped to the high-strength 6063T6 aluminum mast. In the event of a strike, the mast acts as a lightning rod, shunting the current directly to the tower ground and bypassing the delicate phasing harness and base station electronics.
Wind SheddingThe "open" design of a dipole array allows wind to pass through the structure with much less resistance than a solid fiberglass radome. This reduces the mechanical stress on the tower, which is critical for high-altitude or exposed coastal sites.
Mast VerticalityWhile a 36-degree beamwidth is relatively wide, keeping the mast vertical is still essential for uniform coverage. Use a spirit level during installation to ensure the 0-degree horizon is maintained.
Side-Mount OffsetIf mounting to the side of a large tower, ensure sufficient clearance. Mounting the dipoles too close to a wide steel tower will cause the metal to act as an unintended reflector, distorting your omni-directional pattern.
Torque & SealingWhile the phasing harness is molded, the primary N-Female input must be hand-tightened and then sealed with a professional weatherproofing kit (butyl and vinyl tape) to prevent moisture wicking.
Field ReconfigurationIf the site's requirements change (e.g., a new station opens nearby and you no longer need 360-degree coverage), you can simply loosen the U-bolts and re-align the dipoles into the 6 dBd Offset position without removing the mast from the tower.
Frequency stated in title380-420 MHz
CategoryVHF, UHF & General-Purpose Antennas

Description

SD3-400 Stacked Dipole Array \| 380-420 MHz TETRA Base Station Antenna is part of our vhf, uhf & general-purpose antennas range (Radio Communications).

Key details

  • Frequency Range: 380-420 MHz
  • Gain: 3 dBd.
  • Polarization: Vertical
  • Model: SD3-400
  • Frequency (manufacturer model field): 380-420MHz
  • Bandwidth (manufacturer model field): 380-420MHz
  • Gain (manufacturer model field): 3 dBd.
  • Bandwidth: 40 MHz.

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for SD3-400 Stacked Dipole Array \| 380-420 MHz TETRA Base Station Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of SD3-400 Stacked Dipole Array \| 380-420 MHz TETRA Base Station Antenna?

Frequency Range: 380-420 MHz; Gain: 3 dBd.; Polarization: Vertical; Model: SD3-400; Frequency (manufacturer model field): 380-420MHz; Bandwidth (manufacturer model field): 380-420MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other vhf, uhf & general-purpose antennas are available?

The VHF, UHF & General-Purpose Antennas category lists 2,321 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/radio-communications/vhf-uhf-and-general-purpose-antennas/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote