Skip to content
LP-1000-6000 High Performance LPDA \| 1-6 GHz 9 dBi Radome Antenna
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Accessories › Radomes, Enclosures & Replacement Parts

LP-1000-6000 High Performance LPDA \| 1-6 GHz 9 dBi Radome Antenna

Updated 2026-11-19 · Markdown version

Model no. LP-1000-6000

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelLP-1000-6000
Frequency (manufacturer model field)1000-6000MHz
Bandwidth (manufacturer model field)1.0-6.0GHz
Gain (manufacturer model field)9 dBi
Frequency Range1000-6000MHz
Gain9 dBi
Bandwidth1000-6000 MHz
PolarizationHorizontal or Vertical
Input Impedance50 Ohms
Beamwidth -3dB.60+/-5 Degrees Typical
Front to Back Ratio17+/-2 dB. Typical
VSWR - Equal To or Better ThenLess Than 2.5:1
RF Power Handling Capacity100 Watts @ 6GHz
Lightning ProtectionDirect Ground
Antenna MaterialsAluminum, Fiberglass, SS
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Overall Length450 mm
Shipping Length550 mm
Support Boom -Material - O.D.6063T6 AluminumSquare Tube
Elements - Materials- Cross Section - Outer Diameter6063T6 AluminumRound Rod
Maximum Mount Pipe Diameter51mm (2 Inches)
Radome MaterialHigh Strength Fiberglass
Gross Weight2.5 Kgs. Approx
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH
Unified 1–6 GHz CoverageReplaces multiple dedicated antennas for GPS, Cellular, Wi-Fi, and Satellite telemetry with a single high-gain aperture.
Non-Loaded EfficiencyBy avoiding lossy loading techniques, the antenna maintains a stable 9 dBi gain and superior radiation efficiency across its entire 5000 MHz bandwidth.
Welded Element IntegrityAll radiating elements are fully welded to the support boom. This critical design feature prevents RF inter-modulation (PIM) and ensures the antenna maintains its electrical fingerprint under high-power transmission or intense mechanical vibration.
Strategic Radome AdvantageThe ruggedized ABS enclosure provides 100% RF transparency while physically shielding the elements from ice formation, sand erosion, and salt fog. The tapered design ensures a low wind profile (200 KMPH) and prevents performance degradation caused by extreme weather.
MIL-STD-810G CertifiedRigorously tested for shock, vibration, humidity, and fungus resistance. It is the premier choice for permanent naval installations, coastal monitoring, or mobile vehicle-mounted EW suites.
Integrated SafetyOperates at D.C. ground, providing a direct discharge path for lightning and suppressing atmospheric static for an ultra-quiet noise floor during sensitive SIGINT operations.
Elite 1–6 GHz Wideband PerformanceGapless coverage for modern digital signals.
Rugged ABS RadomeEnsures survivability and electrical stability in all weather.
High-Efficiency 9 dBi GainFocused 60-degree horizontal beamwidth for long-range intercepts.
High Power CapacityHandles 250W at 1 GHz and 100W at 6 GHz for continuous-duty jamming.
Compact & LightweightAt only 2.0 Kgs, it is ideal for rapid-deployment masts and UAV tracking systems.
Rear-End Mounting MasteryMounting at the back end ensures the support mast remains outside the radiation pattern to prevent beam distortion.
Corrosion Resistance6063T6 aluminum with olive green powder coating for tactical low visibility.
Published detailIn the signal-dense 1–6 GHz environment (crowded with Wi-Fi and Cellular signals), isolating a target requires a surgical directional focus.
The 9 dBi AdvantageThe focused 60-degree beamwidth acts as an RF "spotlight," allowing an operator to isolate a specific 5G cell or drone data link while physically "nulling out" interference from the sides and rear.
Published detailAcross the 1–6 GHz range, radio waves behave with "optical" precision. They do not bend over hills; they travel in strict line-of-sight and reflect sharply off almost any solid surface.
The Precision AdvantageThe focused 60-degree horizontal beamwidth of the LP-1000-6000 acts as an RF "spotlight." This allows an operator to isolate a specific 5G cell sector or a 5.8 GHz drone command link while physically "nulling out" interference from neighboring urban noise.
Range ExtensionAt microwave frequencies, path loss is severe. Every 6 dB of gain effectively doubles your reception range. The 9 dBi gain allows you to pull in weak data bursts from distances where standard omnidirectional antennas would see nothing but background static.
The "Null" ProblemMost mobile devices and drones are vertically polarized. If a signal reflects off a slanted roof or metal structure, it may arrive at your site with a significant horizontal shift. A standard vertical antenna would experience a signal dropout of up to 20 dB.
The Tactical SolutionThe LP-1000-6000 features a mounting arrangement that allows operators to switch between Horizontal and Vertical polarization in seconds. This ensures you can match the orientation of the incoming reflected wave to maintain a high-speed data intercept or clear monitoring.
Published detailTo successfully disrupt a target link (e.g., a 2.4 GHz Wi-Fi control link or a 5 GHz video downlink), you must achieve a superior Jamming-to-Signal (J/S) ratio at the victim’s receiver.
Strategic Power ConcentrationAt 6 GHz, path loss is high, meaning your jammer must be efficient. The LP-1000-6000 focuses 100 Watts of energy (up to 250W at 1 GHz) into a tight 60-degree cone.
ERP AdvantageThis concentration exponentially increases your Effective Radiated Power (ERP). This allows an operator to successfully "drown out" a legitimate control signal from several kilometers away, even when the adversary is using sophisticated frequency-hopping hardware.
The SolutionThe LP-1000-6000 is D.C. Grounded. It constantly bleeds off static charge to the mast and earth. This ensures the lowest possible noise floor, allowing you to detect weak, "hidden" transmissions or low-probability-of-intercept (LPI) signals that would be buried in the static of an ungrounded antenna.
Cable Integrity at 6 GHzAt 6000 MHz (6 GHz), cable loss is catastrophic. Do not use standard RG-58 or even LMR-400 for long runs. Use high-grade LMR-600 or corrugated copper feeders. Every 3 dB of cable loss effectively cuts your jamming power or reception sensitivity in half.
Radome MaintenanceWhile the ABS radome is rugged, ensure the surface is kept clean of heavy mud, ice, or metallic debris. At microwave frequencies, surface contaminants can refract the signal and distort the 60-degree beam.
Rear-Mount AdvantageSince the mount is at the rear of the 450mm boom, the 2-inch metal mast remains completely behind the antenna. This prevents "Mast Shadowing," which would otherwise cause dangerous reflections and distort the high-frequency beam.
Boresight AlignmentBecause the beamwidth is only 60 degrees, a 30-degree error in alignment will drop your gain significantly. At 6 GHz, precision is everything. Use a high-quality compass or GPS-aligned mount to ensure the antenna is pointed exactly at the target sector.
Frequency stated in title1-6 GHz
Gain stated in title9 dBi
CategoryRadomes, Enclosures & Replacement Parts

Description

LP-1000-6000 High Performance LPDA \| 1-6 GHz 9 dBi Radome Antenna is part of our radomes, enclosures & replacement parts range (Accessories).

Key details

  • Frequency Range: 1000-6000MHz
  • Gain: 9 dBi
  • Polarization: Horizontal or Vertical
  • Model: LP-1000-6000
  • Frequency (manufacturer model field): 1000-6000MHz
  • Bandwidth (manufacturer model field): 1.0-6.0GHz
  • Gain (manufacturer model field): 9 dBi
  • Bandwidth: 1000-6000 MHz

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for LP-1000-6000 High Performance LPDA \| 1-6 GHz 9 dBi Radome Antenna?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of LP-1000-6000 High Performance LPDA \| 1-6 GHz 9 dBi Radome Antenna?

Frequency Range: 1000-6000MHz; Gain: 9 dBi; Polarization: Horizontal or Vertical; Model: LP-1000-6000; Frequency (manufacturer model field): 1000-6000MHz; Bandwidth (manufacturer model field): 1.0-6.0GHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other radomes, enclosures & replacement parts are available?

The Radomes, Enclosures & Replacement Parts category lists 158 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/accessories/radomes-enclosures-and-replacement-parts/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote