| Model | JCM7-850 |
| Frequency (manufacturer model field) | 850-894MHz |
| Bandwidth (manufacturer model field) | 850-894 MHz |
| Gain (manufacturer model field) | 7 dBi. |
| Frequency Range | 850-894MHz |
| Gain | 7 dBi. |
| Bandwidth | 850 - 894 MHz |
| Polarization | Vertical |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Omni-directional |
| Beamwidth -3dB. | 36 Degrees (Vertical) |
| VSWR - Equal To or Better Then | 1.5:1 |
| RF Power Handling Capacity | 50 Watts |
| Input Termination | N-Male |
| Antenna Materials | ABS, Brass, Aluminum |
| Wind Rating | 80 Km/Hr. |
| Mounting Type | Directly on Equipment |
| Overall Length | 800 mm |
| Shipping Length | 850 mm |
| Support Pipe Material | 6063T6 Aluminum Alloy |
| Radiating Material | High Quality Brass |
| Radome Material | High Strength ABS |
| Radome Outer Diameter | 25 mm |
| Gross Weight | 350 Grams |
| Operating Temperature | (-) 30 to +70 Degrees Celsius |
| Storage Temperature | (-) 40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Superior 7 dBi Gain | While most portable whips offer only unity gain, the JCM7-850 uses a precision-phased brass array to achieve 7 dBi. This significantly extends the jamming "bubble," allowing the operator to neutralize threats at a much safer perimeter. |
| Focused 36° Vertical Beamwidth | The antenna compresses its radiation into a sharp 36-degree vertical beam. This ensures that the 50W of transmitter power is directed entirely toward the horizon where threats are located, rather than wasting energy toward the sky. |
| Direct N-Male Integration | The antenna features an N-Male termination for direct mounting onto portable transmitters. For high-mobility missions, the JCM7-850-S version (with integrated spring) is available to absorb mechanical shock and protect the radio's RF port. |
| Ultra-Lightweight Architecture | Weighing just 350 grams, the antenna minimizes the physical burden on the dismounted operator, making it ideal for long-duration patrols in diverse terrain. |
| All-Weather ABS Radome | Radiating elements are protected by a 25mm diameter ABS radome. This enclosure is UV-resistant and provides 100% RF transparency while shielding internal brass components from ice, sand, and moisture. |
| MIL-Grade Finish | Finished in tactical Olive Green, the antenna maintains a low visual profile and integrates seamlessly with standard military kit. |
| Targeted 850–894 MHz Coverage | Optimized for CDMA band denial and spectrum monitoring. |
| High-Efficiency 7 dBi Gain | Provides a massive range advantage over standard portable whips. |
| Superior VSWR (1.5 | 1): Ensures maximum power transfer and protects sensitive portable electronics. |
| Direct N-Male Mounting | Eliminates the need for lossy cables or fragile adapters. |
| Tactical Resilience | Operational in extreme temperatures from -30°C to +70°C. |
| Standard Mount | Best for static monitoring or overwatch where the antenna remains vertical to keep the 36-degree beam aligned with the horizon. |
| Spring Base (JCM7-850-S) | Essential for high-mobility patrols. The spring allows the 800mm radome to deflect up to 90 degrees when striking an obstacle and snap back to vertical, preventing the antenna from acting as a lever that could snap the radio's RF connector. |
| The 7 dBi Advantage | The JCM7-850 compresses the signal into a focused 36-degree horizontal "disc." By narrowing the vertical aperture, every watt of battery power is concentrated toward the horizon. |
| Dominant J/S Ratio | This gain profile ensures a superior Jamming-to-Signal (J/S) ratio, effectively drowning out adversary triggers at a significantly greater standoff distance than a standard whip. |
| Direct N-Male Mounting | The standard JCM7-850 provides a rigid, low-profile connection. This is ideal for static monitoring or overwatch positions where the antenna must remain perfectly vertical to maintain the 36-degree beam's alignment with the horizon. |
| Spring Base Resilience (JCM7-850-S) | For high-mobility patrols, the spring-loaded version is essential. It allows the 800mm radome to deflect up to 90 degrees when striking an obstacle (like a doorway or low branch) and snap back to vertical. This prevents the antenna from acting as a lever that could snap the N-connector on your expensive manpack transmitter. |
| High-Fidelity Brass Elements | By utilizing rigid, high-quality brass radiating elements rather than flexible wire, the JCM7-850 eliminates the "flicker" and impedance shifts caused by wind and movement. |
| SIGINT Precision | This internal stability is vital for SIGINT operators. It ensures a clean RF environment, allowing the operator to detect weak, low-power CDMA "handshakes" or distant control signals that would otherwise be buried in self-generated noise. |
| Olive Green Finish | The military-grade finish ensures the antenna integrates with the operator's tactical kit, minimizing visual signature during daylight operations. |
| D.C. Grounding | The JCM7-850 is D.C. Grounded to bleed off the static electricity (P-Static) generated by wind friction and movement. This protects the sensitive receiver front-end of the manpack system from electrostatic discharge (ESD) and ensures a quiet noise floor for signal interception. |
| Antenna Elevation | When mounted on a backpack jammer, ensure the top of the 800mm radome extends above the operator's head. If the antenna is "shadowed" by the operator's helmet or body, the 7 dBi gain will be blocked in that direction, creating a vulnerability. |
| Connector Integrity | Check the N-Male connection periodically during patrols. Vibration can cause the antenna to loosen, which significantly degrades the 1.5:1 VSWR and reduces jamming efficiency. |
| Body Bonding | For maximum performance, ensure the manpack chassis has a clear electrical path to the operator's frame. This allows the system to use the operator's bulk as a secondary ground plane, stabilizing the 850 MHz radiation pattern. |
| Obstacle Awareness | At 800mm (31.5 inches), always be mindful of low-clearance urban infrastructure. While the ABS radome is rugged, repeated high-velocity impacts can eventually fatigue the mounting interface. |
| Frequency stated in title | 850-894 MHz |
| Gain stated in title | 7 dBi |
| Category | VHF, UHF & General-Purpose Antennas |