| Model | JCM6-2530 |
| Frequency (manufacturer model field) | 2500-3000MHz |
| Bandwidth (manufacturer model field) | 2500-3000MHz |
| Gain (manufacturer model field) | 6 dBi. |
| Frequency Range | 2500-3000MHz |
| Gain | 6 dBi. |
| Polarization | Vertical |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Omni-directional |
| Beamwidth -3dB. | 36 Degrees (Vertical) |
| VSWR - Equal To or Better Then | 2.5:1 |
| RF Power Handling Capacity | 50 Watts |
| Input Termination | N-Male |
| Antenna Materials | ABS, Brass, Aluminum |
| Wind Rating | 80 Km/Hr. |
| Mounting Type | Directly on Equipment |
| Overall Length | 350 mm |
| Shipping Length | 450 mm |
| Support Pipe Material | 6063T6 Aluminum Alloy |
| Radiating Material | High Quality Brass |
| Radome Material | High Strength ABS |
| Radome Outer Diameter | 25 mm |
| Gross Weight | 350 Grams |
| Operating Temperature | (-) 30 to +70 Degrees Celsius |
| Storage Temperature | (-) 40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Broadband 2500–3000 MHz Coverage | This antenna provides a unified solution for the entire 500 MHz wide band. It ensures consistent protection against various 2.6 GHz LTE bands and early 3 GHz tactical communications. |
| Optimized 6 dBi Omni Gain | Achieving 6 dBi in a 350mm configuration focuses RF energy horizontally to establish a dominant Jamming-to-Signal (J/S) ratio, significantly increasing the standoff range against adversary devices. |
| Balanced 36° Vertical Beamwidth | The antenna compresses the signal into a 36-degree vertical beam. This focuses the 50W of transmitter power toward the horizon, while remaining wide enough to be effective on uneven terrain where the operator's pack may shift. |
| Direct N-Male Integration | Featuring an N-Male termination, the antenna mounts directly onto the portable transmitter. For high-mobility missions, the JCM6-2530-S version includes an integrated spring base to absorb mechanical shocks. |
| Ultra-Lightweight Profile | At only 350 grams and 350mm long, it minimizes physical fatigue and snagging risks during long-duration foot patrols. |
| Published detail | 6063T6 Aluminum Radiators: Use of aerospace-grade aluminum ensures superior conductivity and thermal stability, maintaining a stable 2.5:1 VSWR across the entire wideband spectrum. |
| ABS Radome Resilience | The 28mm diameter ABS radome is UV-stabilized and RF-transparent, shielding internal components from ice, sand, and moisture without signal degradation. |
| Military Finish | The support pipe and mounting interface feature a powder-coated Military Green finish for maximum environmental protection and visual stealth. |
| Unified 2.5–3.0 GHz Coverage | Ideal for countering high-band cellular triggers and tactical mesh networks. |
| High-Efficiency 6 dBi Gain | Provides a significant range advantage over standard portable whips. |
| Upper-Radome Radiator Position | Ensures radiating elements are at the highest possible point to clear the operator's gear. |
| Direct N-Male Mounting | Eliminates the need for lossy cables or fragile adapters. |
| Operational Endurance | Reliable in extreme temperatures from -30°C to +70°C. |
| The 36-Degree Advantage | While higher gain antennas exist, their beams are often too thin (18°) for mobile patrols. The JCM6-2530’s 36-degree beam provides a forgiving "window." This ensures that if the operator is crouching or moving through urban debris, the jamming signal stays locked on the horizon. |
| Radiator Placement | The internal elements are positioned in the upper portion of the radome. This design choice ensures that the "denial disc" is projected above the operator's head and backpack, minimizing signal blockage by the operator’s own equipment. |
| Spring Base Resilience | The JCM6-2530-S version is highly recommended for urban "rat runs" and bushy terrain. It prevents the antenna from acting as a lever that could snap the radio's RF connector upon impact. |
| The 6 dBi Advantage | The JCM6-2530 compresses the signal into a focused 36-degree horizontal "disc." This increases the power density toward the horizon, establishing a dominant Jamming-to-Signal (J/S) ratio against localized cellular nodes or drone control links. |
| Operational Flexibility | While 9 dBi antennas offer more range, their 18-degree beams are often too thin for mobile foot patrols. The JCM6-2530’s 36-degree aperture ensures your protection remains active even if you are crouching, running, or moving over uneven terrain. |
| Upper-Radome Placement | The radiating elements in the JCM6-2530 are specifically positioned in the upper portion of the radome. This design choice ensures that the "denial disc" is projected above the operator's head. This minimizes signal absorption by the operator’s gear and provides a clear, 360-degree line-of-sight to potential threats. |
| Spring-Base "Mechanical Fuse" | For missions involving urban "rat runs" or dense brush, the JCM6-2530-S is essential. The spring base allows the antenna to deflect 90 degrees upon impact and snap back, preventing the antenna from acting as a lever that could snap the N-connector on your transmitter. |
| Published detail | In the 2.5–3.0 GHz spectrum, the antenna hardware itself can become a source of "phantom" interference if internal junctions are not perfectly bonded. |
| SIGINT Precision | The fully welded internal architecture eliminates PIM. This ensures an ultra-low noise floor, allowing a connected SIGINT receiver to detect weak, distant data link "handshakes" or low-power control signals that would otherwise be buried in self-generated noise. |
| Military Green Powder Coating | Unlike standard paint, the powder-coated finish on the support pipe is designed to withstand salt spray and extreme abrasion while providing a low visual signature. |
| D.C. Grounding | The JCM6-2530 is D.C. Grounded to bleed off the static electricity (P-Static) generated by wind friction and operator movement. This protects the sensitive high-frequency receiver front-end from electrostatic discharge (ESD) and ensures maximum intercept sensitivity. |
| Line-of-Sight Mastery | At 3.0 GHz, signals are "optical" in nature. Ensure the top of the antenna is the highest point on your kit. Even a wet backpack cover can reduce your jamming range by 50% at these frequencies. |
| Connector Integrity | High-frequency N-Type connectors are sensitive to dust and moisture. Ensure the termination is hand-tightened and check it periodically during long patrols. |
| Body Bonding | For maximum efficiency, ensure the manpack radio has a clean electrical connection to the operator's frame. This allows the system to use the operator's bulk as a secondary ground plane, stabilizing the 2.5-3.0 GHz radiation pattern. |
| VSWR Monitoring | Because this is a broadband antenna (2500–3000 MHz), ensure your transmitter is tuned to stay within the 2.5:1 VSWR limit to prevent thermal throttling of your jamming power. |
| Frequency stated in title | 2500-3000 MHz |
| Gain stated in title | 6 dBi |
| Category | VHF, UHF & General-Purpose Antennas |