| Model | JC7-5159 |
| Frequency (manufacturer model field) | 5100-5900MHz |
| Bandwidth (manufacturer model field) | 5100-5900MHz |
| Gain (manufacturer model field) | 7 dBi |
| Frequency Range | 5100-5900MHz |
| Gain | 7 dBi |
| Bandwidth | 5.1 - 5.7 GHz |
| Polarization | Vertical |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Omni-directional |
| Beamwidth -3dB. | 13 +/-5 Degrees (Vertical) |
| VSWR - Equal To or Better Then | 2.5:1 |
| RF Power Handling Capacity | 250 Watts |
| Input Termination | N-Female |
| Antenna Materials | ABS, Brass, Aluminum |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 150 Km/Hr. |
| Overall Length | 400 mm |
| Shipping Length | 500 mm |
| Radiating Material | High Quality Brass |
| Radome Outer Diameter | 19 mm |
| Gross Weight | 750 Grams |
| Operating Temperature | (-) 30 to +70 Degrees Celsius |
| Storage Temperature | (-) 40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Published detail | The JC7-5159 is optimized for operators who require high-intensity signal saturation across the 5 GHz microwave band. |
| Superior 7 dBi Forward Gain | Unlike standard 2 dBi whips, the JC7-5159 uses in-phase fed brass elements to compress the signal into a tight 18-degree vertical beamwidth. This focuses the jamming energy toward the horizon, creating a dense "denial disc" that effectively neutralizes distant high-frequency triggers. |
| Co-Axial Stub & Spark Gap Tech | These advanced internal engineering techniques ensure a smooth VSWR and consistent performance across the entire 800 MHz bandwidth. This ensures the jammer operates at peak efficiency without the need for manual tuning. |
| NATO Mounting Standard | The integrated base features a standard NATO 4-hole pattern, allowing for immediate integration onto armored vehicle side-mounts or adapter base plates. For high-mobility missions, a spring-loaded version (JCS7-5159) is available to prevent damage from low-hanging obstacles. |
| Radome-Protected Integrity | The 19mm diameter radiating elements are housed in a ruggedized Fiberglass/ABS radome. This high-tech enclosure provides 100% RF transparency while protecting the internal brass elements from ice formation, sand abrasion, and high wind loads (150 Km/Hr). |
| MIL-STD-810G Certified | Rigorously tested for shock, vibration, salt fog, and fungus resistance. It is specifically treated with an epoxy-based Olive Green powder coating to withstand saline coastal air and intense UV radiation. |
| Weather-Protected Feed | The N-Female termination is recessed at the bottom of the NATO mounting flange. This keeps the critical RF connection shielded from moisture ingress and physical damage during rough off-road maneuvers. |
| Comprehensive 5.1–5.9 GHz Coverage | Optimized for C-Band, Wi-Fi, and 5G microwave bands. |
| Massive 200W RF Power Handling | Sustains continuous, high-intensity electronic warfare operations. |
| Elite 7 dBi Omni Gain | Maximizes the effective jamming radius (Bubble) around the vehicle. |
| Narrow 18° Vertical Beamwidth | Concentrates power exactly where ground-based and low-altitude threats are located. |
| Fully Welded Architecture | Prevents RF inter-modulation (PIM) and ensures long-term electrical stability. |
| Standard NATO Interface | Industry-standard mounting for rapid convoy integration. |
| Published detail | In the 5 GHz range, signals travel strictly line-of-sight and are easily absorbed by obstacles. |
| The 7 dBi Advantage | The narrow 18-degree beam ensures your jammer's power isn't wasted on the sky or the ground directly under the vehicle. Instead, it creates a powerful horizontal "disc" of interference. |
| Published detail | At 5 GHz, standard low-gain antennas scatter energy too widely. The JC7-5159 uses vertically stacked brass elements to compress RF energy into a razor-thin 18-degree horizontal disc. |
| The 7 dBi Advantage | By focusing the jammer’s 200W capacity into this narrow window, you exponentially increase the Effective Radiated Power (ERP). This is essential for defeating high-frequency triggers that rely on clear line-of-sight to function. |
| Horizon Focus | This profile ensures that 100% of the jamming energy is directed at ground-level threats and low-flying tactical drones, rather than wasting power on the sky or the area directly beneath the vehicle. |
| Published detail | In the 5 GHz band, even a slight tilt of the antenna can cause the narrow 18-degree beam to "lift" off the target. |
| NATO 4-Hole Standard | The integrated NATO flange provides the mechanical rigidity needed to keep the antenna perfectly vertical at speeds up to 150 Km/Hr. This prevents the "signal skipping" that occurs when lower-quality mounts flex under wind load. |
| Optional Spring Integration | For urban operations with low-hanging infrastructure, the JCS7-5159 (Spring Version) adds 150mm of flexibility. This allows the antenna to deflect during impacts and instantly return to its calibrated vertical position, maintaining the integrity of the jamming bubble. |
| Fully Welded Brass Elements | Every radiating junction in the JC7-5159 is fully welded. This eliminates the "rusty bolt effect" where loose connections generate secondary interference. A clean, PIM-free environment is vital for SIGINT operators attempting to intercept low-power, high-frequency "handshakes" from encrypted Wi-Fi links. |
| Fiberglass/ABS Radome Hybrid | The dual-material radome provides 100% RF transparency. It prevents the internal elements from shifting due to vibration, ensuring the 2.5:1 VSWR remains stable across the entire 800 MHz bandwidth. |
| The Solution | The JC7-5159 is D.C. Grounded. It constantly bleeds off static charges to the vehicle's chassis. This results in an ultra-low noise floor, allowing a connected receiver to detect weak, frequency-hopping signals or low-probability-of-intercept (LPI) bursts that would be buried in the static of an ungrounded antenna. |
| Line-of-Sight Clearance | 5 GHz signals do not penetrate obstacles well. Mount the JC7-5159 at the absolute highest point of the vehicle. If the antenna is "shadowed" by a roof rack or armored turret, you will have a massive dead zone in your protection perimeter. |
| Microwave-Grade Cabling | At 5900 MHz, cable loss is extreme. Do not use standard LMR-240 or RG-58. Use high-grade LMR-400 or LMR-600 for all runs. Every 3 dB of cable loss cuts your 200W jamming power in half. |
| Perfect Verticality | Because the vertical beam is only 18 degrees wide, even a 10-degree mounting error means you are jamming the sky on one side and the asphalt on the other. Use a level during installation to ensure the NATO base is perfectly flat. |
| Weather-Proof Sealing | The N-Female termination is recessed in the flange. Ensure the connection is wrapped in self-vulcanizing tape. At 5.9 GHz, even a microscopic amount of moisture in the connector will cause a massive VSWR spike and potentially damage your power amplifier. |
| Frequency stated in title | 5.1-5.9 GHz |
| Gain stated in title | 7 dBi |
| Category | Wi-Fi, WLAN & Bluetooth |