| Model | HFCM-6-30 |
| Frequency (manufacturer model field) | 6-30MHz |
| Bandwidth (manufacturer model field) | 6-30MHz |
| Gain (manufacturer model field) | 5 dBi. |
| Frequency Range | 6-30 MHz |
| Gain | 5 dBi. |
| Bandwidth | 6-30MHz |
| Antenna Type | Conical |
| Polarization | Vertical |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Omnidirectional |
| VSWR - Equal To or Better Then | 3:1 |
| RF Power Handling Capacity | 1 KW with N-F, 10KW with 1-5/8” EIA |
| Input Termination | N-Female or DIN-Female or 1-5/8” EIA |
| Antenna Materials | Aluminum & Stainless Steel |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 200 Km/Hr. |
| Overall Length | 10 Meters |
| Shipping Length | 3.0 Meters |
| Radiating Material | Ultra Corrosion Resistant Stainless Steel |
| Gross Weight | 75 Kgs |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Full 6–30 MHz Broadband Coverage | Eliminates the need for ATUs, resistors, or multiple antennas for multiband operation. |
| Multi-Mode Propagation | Simultaneously supports NVIS, ground-wave, and long-range skywave communication. |
| Massive 10 KW Power Capacity | Robust electrical design supports high-power backbone links and global HF broadcast. |
| Stainless Steel Radiator Curtain | High-conductivity wire ensures maximum radiation efficiency and total weather resistance. |
| Center-Fed Stability | Large diameter-to-height ratio provides a constant 5 dBi gain and excellent impedance matching. |
| Modular 10m Aluminum Mast | Designed for easy shipping (3m sections) and rapid assembly without heavy machinery. |
| Integrated 64-Element Earth Mat | 10-meter radius stainless steel ground screen maximizes surface wave and skywave efficiency. |
| Marine Grade 316 Fasteners | Designed for a 20+ year service life in salt-heavy coastal or corrosive industrial environments. |
| No Field Tuning Required | Factory-tuned geometry ensures immediate, high-performance deployment. |
| Published detail | Regional communication (0–500 km) often relies on the 6 MHz band to penetrate the ionosphere during the night or during periods of low solar activity. |
| The 10-Meter Advantage | By increasing the mast height to 10 meters, the HFCM-6-30 provides a larger radiating aperture at 6 MHz. This results in a higher-intensity vertical radiation component, ensuring that your signal hits the ionosphere at the steep angles required for NVIS "umbrella" coverage. |
| Overcoming Terrain Obstacles | Because NVIS signals bounce nearly straight up and down, the HFCM-6-30 can maintain 100% reliable links out of deep valleys or behind mountain ranges where ground-wave signals would be completely absorbed. |
| Published detail | As you move up the frequency band toward 30 MHz, the antenna's electrical length increases relative to the wavelength. |
| Radiation Pattern Compression | At higher frequencies, the HFCM-6-30 naturally "squashes" its radiation pattern toward the horizon. This low take-off angle is essential for "long-hop" skywave propagation, allowing the signal to travel thousands of kilometers with fewer "skips" off the ionosphere. |
| Day/Night Frequency Agility | With the HFCM-6-30, a tactical commander can use 6 MHz for secure regional comms at night and instantly switch to 24 MHz for long-distance theater links during the day—all without touching a tuner or changing antennas. |
| The 10-Meter Earth Mat | The supplied 10-meter radius stainless steel ground screen (64 elements) is matched to the antenna’s height. This massive ground plane minimizes "ground return loss" and ensures that the maximum amount of energy is coupled into the surface wave. |
| Consistent Impedance | The earth mat provides a stable electrical environment, ensuring the 2.5:1 VSWR remains constant even if the antenna is installed in sandy, rocky, or dry soil where natural conductivity is poor. |
| Eliminating the "Tuner Bottleneck" | Most Antenna Tuning Units (ATUs) cannot handle 10kW of continuous power without massive heat buildup and potential arcing. Because the HFCM-6-30 is inherently broadband, the 10kW signal goes directly from the transmitter to the stainless steel elements, ensuring 100% of your power is radiated. |
| Tactical ALE Readiness | The antenna is perfect for Automatic Link Establishment (ALE). Since there is no mechanical tuning delay, your radio can scan the entire 6–30 MHz range and find the best clear channel in milliseconds. |
| Radial Deployment | For the full 5 dBi gain, ensure all 64 ground screen elements are pulled tight and spaced evenly (every 5.6 degrees). This creates the uniform "mirror" required for an omni-directional pattern. |
| Guy Wire Tensioning | The 10-meter mast requires proper guying to survive 200 Km/Hr winds. Use the supplied torque settings to ensure the mast remains perfectly vertical; even a slight lean can distort the high-angle NVIS pattern. |
| Feedpoint Protection | The base insulator is a critical high-voltage component. Keep the base area clear of tall grass or debris that could cause "arcing" during high-power (10kW) transmissions, especially in humid or rainy conditions. |
| Lightning Protection | The HFCM-6-30 is a large metallic structure. Ensure the central aluminum mast is properly bonded to a dedicated high-surge lightning ground rod to protect your expensive 10kW transceivers. |
| Frequency stated in title | 6-30 MHz |
| Gain stated in title | 5 dBi |
| Category | VHF, UHF & General-Purpose Antennas |