Skip to content
DME-1100 DME Antenna \| 960-1215 MHz 9 dBi Omni Collinear
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Radio Communications › VHF, UHF & General-Purpose Antennas

DME-1100 DME Antenna \| 960-1215 MHz 9 dBi Omni Collinear

Updated 2026-11-19 · Markdown version

Model no. DME-1100

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelDME-1100
Frequency (manufacturer model field)960-1215MHz
Bandwidth (manufacturer model field)960-1215MHz
Gain (manufacturer model field)9 dBi.
Frequency Range960-1215 MHz
Gain9 dBi.
BandwidthEntire Band
Antenna TypeOmni
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
VSWR - Equal To or Better Then1:2.0
RF Power Handling Capacity250 Watts
Input TerminationN-Female
Antenna MaterialsBrass & Aluminum
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr
Overall Length2.4 Meters
Shipping Length2.5 Meters
Support Pipe O.D.51 mm
Support Pipe MaterialAluminum
Maximum Mount Pipe Diameter51mm (2 Inches)
Radome MaterialFiber Glass
Radome Outer Diameter45 mm
Radome Length2350 mm
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH
High-Intensity 9 dBi GainOptimized 18-degree vertical aperture delivers superior signal reach for ground-to-air navigational links.
Broadband 960–1215 MHz CoverageDesigned for the entire DME frequency spectrum without the need for field tuning.
Friction Static ControlSpecialized radome architecture dissipates static buildup from wind and dust, protecting receiver electronics.
True Omnidirectional PatternCenter-fed architecture ensuring symmetrical 360° horizontal coverage without pattern distortion.
Fully Welded Internal JunctionsEliminates Passive Inter-Modulation (PIM) for a cleaner, high-fidelity navigational signal.
No Ground Plane RequiredProvides peak electrical performance regardless of the mounting surface or mast type.
Optional Signal MonitoringAvailable coupler and probes provide precise -25 dB feedback for automated system health checks.
Marine Grade 316 Stainless SteelHigh-quality hardware ensures maximum resistance to rust and salt fog in coastal climates.
High-Power 150W CapacityRobust electrical design handles the continuous power requirements of distance measuring equipment.
Tactical Military FinishSupplied with an Olive Green epoxy coating for durability against UV radiation and physical impact
The "Quiet" RadomeThe DME-1100 features a specialized radome design that allows for the controlled dissipation of friction-induced static.
Receiver ProtectionWithout this feature, static discharges can create "RF noise bursts" that interfere with the delicate pulse-pair timing of DME signals. By draining this charge safely, the antenna maintains a low noise floor, ensuring the ground station can accurately "hear" distant aircraft interrogators even during sandstorms.
True Omni-Directional SymmetryThe Center-Fed design ensures that the 9 dBi gain is perfectly symmetrical. Unlike end-fed antennas that may have a signal "tilt" at different frequencies, this phased array maintains a rock-solid 18-degree vertical beam across the entire 255 MHz bandwidth.
Constant TimingThis stability ensures that the signal phase and amplitude remain constant for an aircraft regardless of its bearing to the station, which is essential for the high-precision requirements of modern aviation.
Real-Time Health ChecksThe optional -25 dB monitoring probes provide a direct sample of the actual radiated energy. If the antenna’s performance degrades due to physical damage or internal failure, the ground station monitor can detect the shift immediately via the probe output.
RedundancyBy using dual probes, site technicians can cross-reference signal health, ensuring that the navigation data being broadcast to aircraft is always within the strict tolerances required by aviation authorities.
Welded ReliabilityAll internal brass elements are fully welded. This prevents "mechanical noise" (PIM) caused by vibrations in 200 Km/Hr winds, which could otherwise corrupt the digital pulse data.
Corrosion ResistanceThe combination of 6063T6 aluminum, marine-grade 316 stainless steel, and epoxy powder coating ensures that the antenna will not degrade electrically due to oxidation, even after years of exposure to acid rain or salt spray.
Clearance and SitingThe DME-1100 does not require a ground plane, but it should be mounted at the highest possible point on the mast to ensure a clear "Radio Horizon."
Probe CalibrationIf using the optional monitoring probes, ensure the cables connecting the probes to the monitor are phase-stable and high-quality to maintain the ± 1 dB accuracy of the feedback signal.
Lightning ProtectionWhile the antenna is rugged, ensure the 51mm aluminum support pipe is bonded to a dedicated lightning ground. The fiberglass radome protects the elements, but a direct strike to the mast requires a low-resistance path to earth.
Connector WeatherproofingThe N-Female termination is protected at the base. Always use a professional weatherproofing kit (butyl rubber and UV-resistant tape) to prevent moisture wicking, which is the most common cause of DME system failure.
Frequency stated in title960-1215 MHz
Gain stated in title9 dBi
CategoryVHF, UHF & General-Purpose Antennas

Description

DME-1100 DME Antenna \| 960-1215 MHz 9 dBi Omni Collinear is part of our vhf, uhf & general-purpose antennas range (Radio Communications).

Key details

  • Frequency Range: 960-1215 MHz
  • Gain: 9 dBi.
  • Polarization: Vertical
  • Model: DME-1100
  • Frequency (manufacturer model field): 960-1215MHz
  • Bandwidth (manufacturer model field): 960-1215MHz
  • Gain (manufacturer model field): 9 dBi.
  • Bandwidth: Entire Band

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for DME-1100 DME Antenna \| 960-1215 MHz 9 dBi Omni Collinear?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of DME-1100 DME Antenna \| 960-1215 MHz 9 dBi Omni Collinear?

Frequency Range: 960-1215 MHz; Gain: 9 dBi.; Polarization: Vertical; Model: DME-1100; Frequency (manufacturer model field): 960-1215MHz; Bandwidth (manufacturer model field): 960-1215MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other vhf, uhf & general-purpose antennas are available?

The VHF, UHF & General-Purpose Antennas category lists 2,321 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/radio-communications/vhf-uhf-and-general-purpose-antennas/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote