Skip to content
DME-1100-11-180 Directional DME Antenna \| 960-1240 MHz 11 dBi Gain
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Wireless & Networking › Cellular Base Stations & DAS

DME-1100-11-180 Directional DME Antenna \| 960-1240 MHz 11 dBi Gain

Updated 2026-11-19 · Markdown version

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

Frequency (manufacturer model field)960-1240MHz
Bandwidth (manufacturer model field)960-1240MHz
Gain (manufacturer model field)11 dBi
Frequency Range960-1240 MHz
Gain11 dBi
Bandwidth960-1240MHz
Antenna TypeDirectional
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternDirectional
Beamwidth -3dB.180 Degrees (Az)
Beamwidth -3dB.18 Degrees (El)
Front to Back Ratio10 dB.
VSWR - Equal To or Better Then2:1
RF Power Handling Capacity5KW @ Standard DME Pulse Rate
Input TerminationN-Female
Lightning ProtectionDirect Ground
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length1.2 Meters
Shipping Length1.3 Meters
Maximum Mount Pipe Diameter62mm (2.5 Inches)
Radome MaterialHigh Strength Fiberglass
Gross Weight12 Kgs.
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH
High-Intensity 11 dBi GainFocused 18-degree vertical beam delivers superior signal reach and penetration for regional navigation.
Broad 180° Horizontal SectorOptimized for corridor-specific navigation, directing energy forward to increase sector efficiency.
Massive 5KW Pulse Power CapacityRobust electrical design rated for standard high-intensity DME ground station pulses.
Center-Fed Phased ArrayEliminates pattern "squint" and distortion, ensuring pulse stability across the entire 960–1240 MHz band.
Fully Welded Internal JunctionsPrevents Passive Inter-Modulation (PIM) for cleaner signal transmission and pulse integrity.
Integrated Lightning ProtectionD.C. grounded design shunts atmospheric discharges safely to the tower ground.
Optional Signal MonitoringAvailable probes allow for automated near-field signal health checks and monitor compliance.
Marine Grade 316 Stainless SteelSupplied with high-quality hardware for maximum corrosion resistance in coastal zones.
Rugged Fiberglass RadomeProvides 360-degree protection against ice, UV radiation, and physical impact.
Front-Loaded PowerThe 6063T6 aluminum reflector forces all radiated energy into the forward hemisphere. This doubling of effective power ensures that the forward sector is saturated with a high-strength signal, pushing the "Radio Horizon" further for approaching aircraft.
Published detail11 dBi Gain Advantage: This gain level provides a massive link budget, allowing aircraft to achieve a stable DME lock much earlier in their flight path compared to lower-gain omni-directional alternatives.
The 18-Degree Vertical BeamWith an 18-degree vertical beamwidth, this antenna provides a balanced signal "window." It is narrow enough to maintain high gain but wide enough to remain "forgiving" for aircraft at different altitudes or those on steep final approaches.
Center-Fed Phased ArrayThe Center-Fed design ensures that the pulse signal reaches all brass elements simultaneously. This prevents "beam squinting" (where the signal tilts as the frequency changes), ensuring a consistent pulse shape across the entire 960–1240 MHz band.
Published detailDME systems operate using high-intensity pulse pairs. The ability to handle 5,000 Watts (5KW) of peak pulse power is a critical reliability factor for ground stations.
D.C. Grounded SafetyBecause these antennas are often mounted on high, exposed masts, the D.C. grounded design is essential. It provides a low-resistance path to earth for static buildup and atmospheric discharges, protecting the sensitive 5KW transmitter.
The -25 dB Monitoring ProbesThe optional dual probes act as internal monitors. They provide a precise sample of the actual radiated 180-degree wave back to the station’s monitoring unit.
Immediate Fault DetectionIf the 180-degree pattern is distorted by heavy icing or physical damage, the probes will detect a shift in the -25 dB signal level, allowing the system to automatically switch to a backup or alert air traffic control.
Orientation and AimingWhile the 180-degree beam is wide, the center of the reflector must be aligned precisely with the center of the required flight corridor to maximize the 11 dBi gain.
Vertical Beam ManagementWith an 18-degree vertical beam, this antenna is an excellent choice for "high-site" installations where aircraft may be significantly below the antenna's physical horizon during their approach.
Pulse Power CablingTo handle 5KW pulses at 1200 MHz, use high-grade corrugated coaxial cables like LDF4-50A (1/2" Heliax). Standard braided cables may experience "voltage breakdown" or excessive heat under continuous high-power DME duty cycles.
Connector WeatherproofingThe N-Female termination is protected at the base. Always use a professional weatherproofing kit (butyl rubber and UV-resistant tape) to prevent moisture wicking. In DME systems, even minor moisture can cause pulse distortion and system failure.
Frequency stated in title960-1240 MHz
Gain stated in title11 dBi
CategoryCellular Base Stations & DAS

Description

DME-1100-11-180 Directional DME Antenna \| 960-1240 MHz 11 dBi Gain is part of our cellular base stations & das range (Wireless & Networking).

Key details

  • Frequency Range: 960-1240 MHz
  • Gain: 11 dBi
  • Polarization: Vertical
  • Frequency (manufacturer model field): 960-1240MHz
  • Bandwidth (manufacturer model field): 960-1240MHz
  • Gain (manufacturer model field): 11 dBi
  • Bandwidth: 960-1240MHz
  • Antenna Type: Directional

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for DME-1100-11-180 Directional DME Antenna \| 960-1240 MHz 11 dBi Gain?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of DME-1100-11-180 Directional DME Antenna \| 960-1240 MHz 11 dBi Gain?

Frequency Range: 960-1240 MHz; Gain: 11 dBi; Polarization: Vertical; Frequency (manufacturer model field): 960-1240MHz; Bandwidth (manufacturer model field): 960-1240MHz; Gain (manufacturer model field): 11 dBi. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other cellular base stations & das are available?

The Cellular Base Stations & DAS category lists 195 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/wireless-and-networking/cellular-base-stations-and-das/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote