Skip to content
Combo Antenna 5-in-1 GPS + LTE MIMO + WIFI MIMO Dual Band. 7-in-1 Option
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Satellite & Positioning › GNSS, GPS & RTK

Combo Antenna 5-in-1 GPS + LTE MIMO + WIFI MIMO Dual Band. 7-in-1 Option

Updated 2026-11-19 · Markdown version

US$57.34 / piece

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

Three internal antennas (and three cables)Multiband combo antenna antenna that provides coverage for three different wireless devices.
Seven internal antennas (and seven cables)Multiband combo antenna antenna that provides coverage for seven different wireless devices.
Published detail2 x 2400~2483.5MHz/4900~5825 MHz - WiFi (dual band) and/or Bluetooth
Published detailOutdoor / Indoor 2.5dBi Omni-Directional 700 MHz to 2700 MHz Antenna with Adhesive Mount
Cable 1 & 2694-960 MHz, 3 dBi & 1710-2750 MHz, 4 dBi (these typically have SMA-male connectors)
Cable 3 & 42.4-2.5 & 4.9-6.0 GHz, 5 dBi (these typically have RP-SMA-male connectors)
Cable 51575 MHz, GPS LNA 26 dB, 5 dBi (this typically has an SMA-male connector)
As a general rule of thumbLTE / 4G and GPS antenna cables typically have SMA-male connectors, and WiFi antennas most typically have RP-SMA connectors.
OptionGNSS model.
Published detailWith 6FT cables to SMA or RP-SMA connector options
V.S.W.R. < 1.8Very good low V.S.W.R. that is indicative of a very high-quality, high performance antenna.
IP65 ingress-protection ratingWeatherproof /waterproof
No need for a special ground planeFor example: Install on a vehicle roof, house roof, enclosure etc: Facing up is optimal. It's better if the roof material is not metal.
Conversion to Iridium Satellite CoverageFor all of our antennas that cover the GPS frequency 1.5GHz: We can convert the 1.5GHz GPS antenna to 1.6GHz in order to cover the Iridium (Satellite) frequency. This customization takes about 4 extra weeks in production and will increase the cost of the antenna by $1.75 per antenna.
LTE / 4G & GSM /3GBroadband design for 4G / LTE and 3G / GSM systems: 4G networks
US domestic LTE700 MHz band: AT&T Mobility, Verizon.
Global LTE2600 MHz band (2.6GHz)
Non Line of Sight (NLOS)900 MHz band is best for passing through trees and forests.
IoT wireless & M2MCompatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM, LoRa, Wi-Fi HaLow. (Compatible because it is vertically polarized).
Published detailWiMAX frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)
Mounting / InstallationTwo Options:
Can be mounted onCan mount on a fender, or other vertical object. Wall or side an enclosure. If mounted on a locked enclosure, it cannot be removed by vandal / thief because the nut for the screw-mount is on the inside.
Published detailSuitable for outdoor or indoor wireless gear with RP-SMA-female or SMA-female connector.
ROHS & REACH compliantHeavy metal content and other material content is in compliance with ROHS 3 and REACH ( connector and antenna).
Published detailConnector
MaterialABS \| Diameter (housing): 4.5 inches
Published detailIP67 (exclude cable outlet)
Test MethodUL-94
Cable LengthCustom cable lengths and alternative connector types can be supplied for volume requirements.
Dimensions of the nut for the antennaHeight 14mm. Widest point on the hex: 47mm. Width on two parallel flats of the hex: 41.38mm
Published detailSMA & RP-SMA Connector Characteristics:
RP-SMA and SMA gender is counter-intuitiveThe gender is referring to the pins inside-not the threads. RP-SMA male have threads on the inside. More details regarding RP-SMA gender determination.
Published detailSMA-male connector fits items that have an SMA (female) jack/connector.
Published detailWe offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector(s).
AntennasHow to choose
Wireless Frequencies2.4GHz, 5GHz, 900MHz, WiMAX
SKUALO2G5combo10ftSMA5
CategoryGNSS, GPS & RTK

Technical parameters

ItemSpecifications
GPS & GLONASS AntennaFrequency Range1575.42~1610MHz
PolarizationRHCP
Impedance50 Ω
Dimension25*25*6mm
Gain28 ± 2dB
Noise Figure≤ 1.5dB
Supply Voltage3~5V DC
Current Consumption< 15mA
V.S.W.R SAW Ground Plane< 2.0 The GPS antenna has SAW to filter other signals. The GPS internal antenna has a metal shield on its bottom side as a ground plane
LTE Antenna MIMOFrequency Range698~960MHz/1710~2690MHz
V.S.W.R< 3.0
PolarizationLinear
Gain3dBi
Impedance50Ω
WIFI Antenna MIMOFrequency Range2400~2483.5MHz/4900~5825MHz
V.S.W.R< 2.5
PolarizationLinear
Gain2dBi
Impedance50Ω
MechanicalCable100-series double-shielded
ConnectorSMA or others
RadomeMaterial: ABS \| Diameter (housing): 4.5 inches
Mounting MethodScrew
EnvironmentalOperating Temperature-40 ℃ ~+85 ℃
Relative HumidityUp to 95%
Ingress ProtectionIP67 (exclude cable outlet)
Vibration10 to 55Hz with 1.5mm amplitude 2hours
Environmentally FriendlyROHS Compliant
Frequency rangeAssessmentRatingTechnical performance details
700 MHz – 960 MHzStable RF Performance☠☠☠â˜RF performance evaluated across the 700 MHz – 960 MHz frequency range, demonstrating consistent and stable behavior throughout the sweep. Across the measured band, the VSWR ranges between 1.2:1 and 2.3:1, with a Return Loss between −8 dB and −12 dB, indicating effective power transfer and controlled signal reflection. Improved performance is observed around 830–870 MHz, where the antenna achieves better efficiency and lower mismatch. The measured impedance is approximately 22.42 + j7.61 Ω, indicating a slightly reactive condition relative to the nominal 50 Ω system impedance. The Smith chart response remains compact and structured, confirming stable RF behavior and controlled impedance variation across the evaluated frequency range.

Description

Combo Antenna 5-in-1 GPS + LTE MIMO + WIFI MIMO Dual Band. 7-in-1 Option is part of our gnss, gps & rtk range (Satellite & Positioning).

Key details

  • Material: ABS \| Diameter (housing): 4.5 inches
  • Option: GNSS model.
  • Published detail: With 6FT cables to SMA or RP-SMA connector options
  • IP65 ingress-protection rating: Weatherproof /waterproof
  • US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
  • Global LTE: 2600 MHz band (2.6GHz)
  • Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
  • Mounting / Installation: Two Options:

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece at US$56.40 per piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for Combo Antenna 5-in-1 GPS + LTE MIMO + WIFI MIMO Dual Band. 7-in-1 Option?

The listed minimum order is 1 piece, at US$57.34 per piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of Combo Antenna 5-in-1 GPS + LTE MIMO + WIFI MIMO Dual Band. 7-in-1 Option?

Material: ABS \| Diameter (housing): 4.5 inches; Option: GNSS model.; Published detail: With 6FT cables to SMA or RP-SMA connector options; IP65 ingress-protection rating: Weatherproof /waterproof; US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.; Global LTE: 2600 MHz band (2.6GHz). The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other gnss, gps & rtk are available?

The GNSS, GPS & RTK category lists 644 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/satellite-and-positioning/gnss-gps-and-rtk/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

US$57.34MOQ 1 pieceGet a quote