| Model | AWD-100-2000 |
| Frequency (manufacturer model field) | 100-2000MHz |
| Bandwidth (manufacturer model field) | 100-2000MHz |
| Gain (manufacturer model field) | 2.15 dBi |
| Frequency Range | 100 - 2000 MHz. |
| Gain | 2.15 dBi |
| Bandwidth | 100-2000MHz |
| Polarization | Vertical |
| Input Impedance | 50 Ohms. |
| Radiation Pattern | Omni-Directional |
| Beamwidth -3dB. | 78 Degrees (Vertical) |
| VSWR - Equal To or Better Then | 2:1 |
| RF Power Handling Capacity | 500 Watts |
| Input Termination | N-Female |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Weight | 4 Kgs (without brackets) |
| Wind Rating | 200 Km/Hr. |
| Overall Length | 0.9 Meters |
| Shipping Length | 1 Meter |
| Support Pipe Material | Powder Coated Aluminum |
| Insulator Material | Teflon & Nylon |
| Maximum Mount Pipe Diameter | 52 mm (2Inches) |
| Gross Weight | 5.5 Kgs. (with brackets) |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)30 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |
| Ultra-Wideband Frequency Response | Provides continuous, high-efficiency operation from 100 MHz to 2000 MHz, covering VHF, UHF, and L-Band frequencies in a single aperture. |
| Constant 360° Omnidirectional Coverage | Engineered to maintain a uniform horizontal radiation pattern, ensuring seamless signal acquisition and transmission from all directions without "dead zones." |
| High Power Transmission Capacity | Capable of handling up to 500 Watts of RF power, making it ideal for high-intensity Electronic Countermeasures (ECM) and jamming applications. |
| Optimized Vertical Beam-width | Features a broad 78-degree half-power vertical beam-width, which provides excellent hemispherical coverage and prevents signal loss during high-angle ground-to-air or mountainous communication. |
| Linear Vertical Polarization | Designed to match the standard polarization of tactical handhelds, mobile radios, and airborne systems for maximum link stability. |
| Superior Impedance Matching | Maintains a VSWR of better than 2.5:1 across the entire 1.9 GHz bandwidth, ensuring minimal reflected power and protecting sensitive transmitter hardware. |
| Passive Architecture | A completely passive design that requires no field tuning, adjustments, or power supply, ensuring 100% reliability in remote or hostile environments. |
| Frequency Consolidation | Eliminates the logistical and visual burden of deploying multiple antennas by consolidating multi-band requirements into one rugged unit. |
| High Sensitivity for Monitoring | Designed with low internal noise characteristics, making it highly effective for wide-spectrum ELINT (Electronic Intelligence) and SIGINT (Signal Intelligence) missions. |
| Frequency Agility (100–2000 MHz) | The primary advantage is the massive, continuous bandwidth. It covers VHF, UHF, and L-Band frequencies without the need for frequency-specific switching or hardware changes. |
| Omnidirectional Hemispherical Coverage | With a 360° horizontal pattern and a broad 78° vertical beam-width, the antenna provides "bubble" coverage. This ensures that signals from ground-based units and aerial platforms are captured simultaneously. |
| High Power Burn-Through | Capable of handling 500 Watts, it allows for the use of high-power amplifiers to "burn through" interference or provide high-intensity jamming coverage across a wide area. |
| Zero Field Maintenance | The antenna is a passive, pre-tuned device. It requires no field tuning or electrical adjustments, making it a "fit and forget" solution for remote or unmanned stations. |
| Integrated Weather Protection | The RF termination and feed cable are housed inside the mounting pipe. This protects the most vulnerable parts of the system from moisture, ice, and salt-fog degradation. |
| Logistical Simplification | Since one antenna covers 1.9 GHz of bandwidth, the logistics of shipping, storing, and deploying multiple antenna types are eliminated. |
| Reduced Mast Loading | Using a single AWD-100-2000 reduces the weight and "wind-sail" surface area on a tactical mast. This allows for the use of lighter, more portable masts or increases the stability of fixed towers in high winds (up to 200 Km/Hr). |
| Low Visual & RF Signature | A single antenna is harder to detect visually and via radar than a complex multi-antenna array, providing a "low-profile" benefit to tactical command posts. |
| Protection of Radio Hardware | The D.C. Grounded design and excellent VSWR (<2.5:1) ensure that reflected power is minimized and static electricity is bled off, significantly extending the life of connected high-value radio equipment. |
| Low Temperature (Method 502.5) | Operational and storage tested from -40°C to +80°C. The use of Teflon and Nylon insulators ensures no material embrittlement or cracking in arctic conditions. |
| High Temperature (Method 501.5) | The 6063T6 aluminum alloy and powder-coated finish prevent structural warping and heat-soak degradation in desert environments. |
| Salt Fog (Method 509.5) | All fasteners are Type 316 Marine Grade Stainless Steel, and the body is anodized/powder-coated to prevent galvanic corrosion during prolonged exposure in coastal or naval environments. |
| Rain & Humidity (Method 506.5 / 507.5) | The internal termination design (N-Female connector housed inside the support pipe) ensures zero water ingress into the RF path during high-velocity blown rain. |
| Shock & Vibration (Method 516.6 / 514.6) | Ruggedized for transport in tactical ground vehicles and operation on high-vibration platforms like naval vessels or armored command centers. |
| RoHS (2011/65/EU & 2015/863) | Fully compliant with the Restriction of Hazardous Substances. The antenna is manufactured without the use of lead, mercury, cadmium, or hexavalent chromium, making it environmentally safe for deployment across the EU. |
| WEEE (2012/19/EU) | Compliant with Waste Electrical and Electronic Equipment regulations, ensuring the product is designed for lifecycle management and sustainable recycling. |
| CE Marking | Meets the essential requirements of the Radio Equipment Directive (RED) for electromagnetic compatibility (EMC) and radio spectrum efficiency. |
| Ingress Protection (IP67) | The antenna's critical RF junction is sealed to an IP67 rating, making it dust-tight and protected against the effects of temporary immersion in water. |
| Wind Loading (ICAO/FAA Standards) | With a wind survival rating of 200 Km/Hr, the antenna meets the structural safety requirements for installation at international airports and high-altitude telecommunication towers. |
| Antenna Standards (IEEE) | Radiation patterns and gain measurements are verified against IEEE Std 149 (Standard Test Procedures for Antennas). |
| Frequency stated in title | 100-2000 MHz |
| Category | Scanner & Wideband Receive |