Skip to content
AC-430-470 Tactical Jammer Antenna \| 430-470 MHz Collinear Omni
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Radio Communications › VHF, UHF & General-Purpose Antennas

AC-430-470 Tactical Jammer Antenna \| 430-470 MHz Collinear Omni

Updated 2026-11-19 · Markdown version

Model no. AC-430-470

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelAC-430-470
Frequency (manufacturer model field)430-470MHz
Bandwidth (manufacturer model field)430-470MHz
Gain (manufacturer model field)3 dBi
Frequency Range430-470 MHz
Gain3 dBi
BandwidthEntire Band
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
VSWR - Equal To or Better Then2:1
RF Power Handling Capacity150 Watts
Input TerminationN-Female
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length600 mm
Shipping Length700 mm
Support Pipe MaterialAluminum Alloy
Insulator MaterialTeflon & Nylon
Maximum Mount Pipe Diameter52 mm ( 2 Inches)
Radome MaterialABS Tube
Gross Weight3 Kgs.
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH
Hemispherical 78° Vertical BeamUnlike high-gain antennas with thin beams, the 78-degree vertical beamwidth ensures that the jamming signal remains effective even when the vehicle is traversing steep, uneven terrain or targeting threats at varying elevations.
Advanced Co-Axial Stub & Spark Gap TechThese internal engineering techniques ensure a stable VSWR and consistent performance across the full 40 MHz bandwidth. This "plug-and-play" reliability is critical for rapid-response tactical scenarios.
NATO Mounting StandardThe integrated base uses the industry-standard NATO 4-hole pattern, allowing for immediate installation on vehicular side-mounts or adapter base plates.
Fiberglass Radome ProtectionThe large-diameter brass radiating elements are enclosed in a 44mm fiberglass housing. This radome is electrically transparent but mechanically robust, providing the strength needed to resist wind loads up to 170 Km/Hr.
Corrosion-Resistant ArchitectureUtilizing high-class aluminum alloy and finished in tactical Olive Green, the antenna is shielded against UV radiation, salt spray, and ice formation.
Weather-Protected FeedThe N-Female termination is fixed at the bottom of the NATO mounting base. This keeps the critical RF connection shielded from moisture ingress and physical damage during high-speed transit.
Optimized 430–470 MHz CoverageTargeted for UHF tactical denial and LMR/TETRA monitoring.
Omni-Directional 3 dBi GainCreates a uniform "denial bubble" in all directions around the vehicle.
Brass Radiating ElementsHigh-quality in-phase feeding for maximum electrical stability.
Standard NATO InterfaceIndustry-standard mounting for rapid convoy integration.
Published detailIn the 430–470 MHz band, signals often reflect off large geographic or urban features.
The 78-Degree AdvantageMost tactical antennas in this frequency range can "null out" or lose signal contact when tilted. The AC-430-470’s 78-degree vertical beamwidth is exceptionally forgiving. It ensures that your "denial bubble" remains spherical and active even when the vehicle is ascending a incline or rocking during off-road maneuvers.
NATO 4-Hole StandardThe integrated NATO flange allows for a rock-solid connection to the vehicle's side-mount adapter plates. This standardized mounting ensures the antenna remains securely attached during high-speed transit, preventing the "base-snap" common with smaller threaded mounts.
In-Phase Brass ElementsThe AC-430-470 utilizes large-diameter brass radiating elements that are fed strictly in-phase. Unlike flexible wire antennas, these rigid brass sections do not change impedance during high-wind events, ensuring that your jammer’s power is radiated consistently.
Ground-to-Air InterceptsThis wide aperture is ideal for capturing signals from low-flying tactical UAVs or rotary-wing aircraft using the 400 MHz band for command and control.
NATO 4-Hole StandardThe integrated NATO flange allows for a rock-solid, metal-to-metal connection to the vehicle's side-mount adapter plates. This standardized mounting ensures the antenna remains securely attached during high-speed transit, preventing the "base-snap" common with smaller threaded mounts.
Low Wind LoadingThe 44mm cylindrical fiberglass radome is designed to minimize drag at speeds up to 170 Km/Hr, ensuring the mast doesn't flex excessively, which keeps your 360-degree protection perimeter stable.
In-Phase Brass ElementsThe AC-430-470 utilizes large-diameter brass radiating elements that are fed strictly in-phase. Unlike flexible wire antennas, these rigid brass sections do not "flicker" or change impedance during high-wind events.
Fully Welded ArchitectureBy welding the internal junctions, the antenna eliminates PIM. This is critical for SIGINT, as it ensures your sensitive receivers can monitor for weak adversary "handshakes" without being blinded by noise generated by the antenna's own hardware.
The SolutionThe AC-430-470 is D.C. Grounded. It constantly bleeds off static charges to the vehicle chassis or mounting mast. This results in an ultra-low noise floor, allowing a connected receiver to detect low-power "hidden" transmissions or weak trigger pulses that would be buried in the static of an ungrounded antenna.
Antenna VerticalityWhile the 78-degree beam is forgiving, for maximum ground-to-ground range, ensure the NATO base is mounted as level as possible.
Cable IntegrityAt 470 MHz, cable loss begins to impact performance. Use high-grade LMR-400 to ensure the full 150W of jammer power reaches the brass elements.
Chassis BondingEnsure the mounting plate has a clean, metal-to-metal bond with the vehicle. In this frequency range, the vehicle body acts as a critical part of the antenna's ground system.
SpacingMaintain a minimum of 1 meter of separation from other antennas. The wide vertical beam of the AC-430-470 can easily "talk" to other sensors on the same roof, potentially causing interference.
Frequency stated in title430-470 MHz
CategoryVHF, UHF & General-Purpose Antennas

Description

AC-430-470 Tactical Jammer Antenna \| 430-470 MHz Collinear Omni is part of our vhf, uhf & general-purpose antennas range (Radio Communications).

Key details

  • Frequency Range: 430-470 MHz
  • Gain: 3 dBi
  • Polarization: Vertical
  • Model: AC-430-470
  • Frequency (manufacturer model field): 430-470MHz
  • Bandwidth (manufacturer model field): 430-470MHz
  • Gain (manufacturer model field): 3 dBi
  • Bandwidth: Entire Band

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for AC-430-470 Tactical Jammer Antenna \| 430-470 MHz Collinear Omni?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of AC-430-470 Tactical Jammer Antenna \| 430-470 MHz Collinear Omni?

Frequency Range: 430-470 MHz; Gain: 3 dBi; Polarization: Vertical; Model: AC-430-470; Frequency (manufacturer model field): 430-470MHz; Bandwidth (manufacturer model field): 430-470MHz. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other vhf, uhf & general-purpose antennas are available?

The VHF, UHF & General-Purpose Antennas category lists 2,321 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/radio-communications/vhf-uhf-and-general-purpose-antennas/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote