Skip to content
SD3-75 VHF Stacked Dipole Array (66-88 MHz)
  • Standard & made-to-drawing parts
  • Checked before shipping
  • Air, sea & express delivery
Radio Communications › VHF, UHF & General-Purpose Antennas

SD3-75 VHF Stacked Dipole Array (66-88 MHz)

Updated 2026-11-19 · Markdown version

Model no. SD3-75

Price on request

MOQ 1 piece · Final price confirmed in your quote

Specifications are as listed for this product. Antenna Hub - Antenna industry experts confirms ratings, mating parts, compatibility, packing and lead time with you before you order.

Specifications

ModelSD3-75
Frequency (manufacturer model field)66 - 88 MHz
Bandwidth (manufacturer model field)6 MHz.
Gain (manufacturer model field)3 dBd.
Frequency Range66 - 88 MHz
Gain3 dBd.
Bandwidth6 MHz.
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
VSWR - Equal To or Better Then1:1.5
RF Power Handling Capacity500 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground
Antenna MaterialsAll Aluminum
Mounting Hardware -MaterialsStainless Steel
Wind Rating200 Km/Hr
Overall Length6 Meters
Shipping Length3 Meters
Maximum Mount Pipe Diameter51 mm (2 Inches)
Support Pipe (Mast) - MaterialAluminum 51 mm OD
Gross Weight20 Kgs.
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH
VHF Lower Band OptimizationSpecifically tuned for the 66–88 MHz frequency range with a 6 MHz bandwidth.
Dual-Pattern FlexibilityField-adjustable configuration for 3dBd Omni-directional or 6dBd Offset radiation patterns.
High-Power CapacitySafely manages up to 500 Watts continuous RF power, perfect for heavy-traffic repeaters.
Modular Mast System6-meter mast splits into two 3-meter sections for easy shipping and handling.
Integrated Lightning ProtectionOperates at D.C. ground to safeguard connected electronics from surge strikes.
Extreme Wind ResistanceStructurally reinforced for a 200 Km/Hr (125 MPH) wind rating.
Precision Phasing HarnessHeat-shrink sealed cables ensure smooth VSWR (< 1.5:1) and total weatherproofing.
Side-Mount ReadyIncludes two 1.35-meter (4.5 ft) horizontal arms for optimal tower side-mounting clearance.
Superior MaterialsConstructed from 6063T6 Aluminum Alloy and marine-grade stainless steel for maximum service life.
Low Noise PerformanceEngineered for high-density radio sites to minimize interference and provide long-haul coverage.
Tactical UseIdeal for repeaters located in the center of a service area or on a hilltop where coverage is needed in all directions.
The ResultThis balances the radiation pattern to provide a consistent 5.15 dBi (3 dBd) signal for mobile units circling the tower.
Tactical UseBest for sites at the edge of a coverage zone, such as a coastal station or a repeater at the mouth of a long valley.
The ResultBy aligning the elements, you narrow the horizontal beam and increase the forward gain to 8.15 dBi (6 dBd). This effectively doubles your power in the target direction, allowing the signal to reach significantly further.
Close-in CoverageUnlike high-gain "pencil beam" antennas that might overshoot nearby users, the SD3-75 is designed with null-fill characteristics. This ensures that users located closer to the base of the tower still receive a reliable signal even while the main lobe handles the long-distance traffic.
Tower InterferenceAt 66–88 MHz, the wavelength is relatively long. If the dipoles are mounted too close to a metal tower, the tower will act as an unintended reflector, distorting your pattern and increasing VSWR.
Installation TipAlways use the provided side arms to maintain the 1.35-meter separation. This ensures the antenna operates within its 1.5:1 VSWR specification and maintains the integrity of your chosen radiation pattern.
Loosen U-BoltsUsing a standard wrench, loosen the stainless steel U-bolts holding the dipole mounting blocks to the mast.
Rotate ElementsFor Omni, rotate the bottom dipole 180° relative to the top. For Offset, align them perfectly in the same plane.
Check Phasing HarnessEnsure the phasing harness cables are not under tension and that the heat-shrink seals remain intact.
Secure & LevelTighten the U-bolts and use a spirit level to ensure the 6-meter mast is perfectly vertical. A tilt of even a few degrees can significantly move your 36° vertical beam off-target at the horizon.
Frequency stated in title66-88 MHz
CategoryVHF, UHF & General-Purpose Antennas

Description

SD3-75 VHF Stacked Dipole Array (66-88 MHz) is part of our vhf, uhf & general-purpose antennas range (Radio Communications).

Key details

  • Frequency Range: 66 – 88 MHz
  • Gain: 3 dBd.
  • Polarization: Vertical
  • Model: SD3-75
  • Frequency (manufacturer model field): 66 – 88 MHz
  • Bandwidth (manufacturer model field): 6 MHz.
  • Gain (manufacturer model field): 3 dBd.
  • Bandwidth: 6 MHz.

Ordering through Antenna Hub – Antenna industry experts

Minimum order is 1 piece. Send one inquiry with the part number, quantity and destination, and Antenna Hub – Antenna industry experts confirms specification, compatibility, color, price, lead time and shipping, checks the goods before dispatch and ships them to you.

Frequently asked questions

What is the minimum order quantity (MOQ) for SD3-75 VHF Stacked Dipole Array (66-88 MHz)?

The listed minimum order is 1 piece. Smaller trial quantities or samples can be requested in your inquiry; Antenna Hub - Antenna industry experts confirms what is possible for your size.

What are the main specifications of SD3-75 VHF Stacked Dipole Array (66-88 MHz)?

Frequency Range: 66 - 88 MHz; Gain: 3 dBd.; Polarization: Vertical; Model: SD3-75; Frequency (manufacturer model field): 66 - 88 MHz; Bandwidth (manufacturer model field): 6 MHz.. The full specification table and any technical parameter tables are listed on this page.

Can this product be customized (OEM)?

Color, logo printing, size, material, packaging and labels can be quoted to your specification or drawing (OEM / ODM).

What is the lead time and how is it shipped?

Lead time depends on quantity and customization and is confirmed in your quote. Antenna Hub - Antenna industry experts checks the goods before dispatch and ships by express, air or sea; mixed orders can be consolidated in one shipment.

Which other vhf, uhf & general-purpose antennas are available?

The VHF, UHF & General-Purpose Antennas category lists 2,321 products in different sizes, materials and colors: https://astronwireless.com/antenna-products/radio-communications/vhf-uhf-and-general-purpose-antennas/

How we work

Specified, checked and shipped by Antenna Hub - Antenna industry experts

Antenna Hub - Antenna industry experts supplies antennas and RF components to device makers, integrators, distributors, IoT and telecom OEMs. Orders go through one controlled process: specification, compatibility, color and packaging confirmed, samples approved, function and finish checked before packing, then packed for export — stock items or OEM with your logo.

  • Cellular 4G/5G, Wi-Fi, GNSS, LoRa/IoT and RFID antennas
  • OEM / ODM: your logo, colors and retail packaging
  • VSWR and gain tested before packing
  • Mixed orders across categories consolidated in one shipment
  • Samples available for approval before mass production

More about us → · Request a sample or custom quote →

Request a quote for this product

Verification
Verification image showing a simple addition problem to solve

Valid for 15 minutes, single use.

Your inquiry goes to the Antenna Hub - Antenna industry experts team only. We confirm every detail and handle production, QC and shipping for you.

Price on requestMOQ 1 pieceGet a quote